Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
This commit is contained in:
Linus Torvalds
2013-02-21 13:57:13 -08:00
107 ha cambiato i file con 20759 aggiunte e 4125 eliminazioni

Vedi File

@@ -20,7 +20,6 @@
#include <linux/serial.h>
#include <linux/tty_flip.h>
#include <linux/slab.h>
#include <linux/atomic.h>
#include <linux/io.h>
#include <linux/ipack.h>
#include "ipoctal.h"
@@ -38,21 +37,19 @@ struct ipoctal_channel {
spinlock_t lock;
unsigned int pointer_read;
unsigned int pointer_write;
atomic_t open;
struct tty_port tty_port;
union scc2698_channel __iomem *regs;
union scc2698_block __iomem *block_regs;
unsigned int board_id;
unsigned char *board_write;
u8 isr_rx_rdy_mask;
u8 isr_tx_rdy_mask;
unsigned int rx_enable;
};
struct ipoctal {
struct ipack_device *dev;
unsigned int board_id;
struct ipoctal_channel channel[NR_CHANNELS];
unsigned char write;
struct tty_driver *tty_drv;
u8 __iomem *mem8_space;
u8 __iomem *int_space;
@@ -64,28 +61,23 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
channel = dev_get_drvdata(tty->dev);
/*
* Enable RX. TX will be enabled when
* there is something to send
*/
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
channel->rx_enable = 1;
return 0;
}
static int ipoctal_open(struct tty_struct *tty, struct file *file)
{
int res;
struct ipoctal_channel *channel;
channel = dev_get_drvdata(tty->dev);
if (atomic_read(&channel->open))
return -EBUSY;
tty->driver_data = channel;
res = tty_port_open(&channel->tty_port, tty, file);
if (res)
return res;
atomic_inc(&channel->open);
return 0;
return tty_port_open(&channel->tty_port, tty, file);
}
static void ipoctal_reset_stats(struct ipoctal_stats *stats)
@@ -111,9 +103,7 @@ static void ipoctal_close(struct tty_struct *tty, struct file *filp)
struct ipoctal_channel *channel = tty->driver_data;
tty_port_close(&channel->tty_port, tty, filp);
if (atomic_dec_and_test(&channel->open))
ipoctal_free_channel(channel);
ipoctal_free_channel(channel);
}
static int ipoctal_get_icount(struct tty_struct *tty,
@@ -137,11 +127,12 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr)
{
struct tty_port *port = &channel->tty_port;
unsigned char value;
unsigned char flag = TTY_NORMAL;
unsigned char flag;
u8 isr;
do {
value = ioread8(&channel->regs->r.rhr);
flag = TTY_NORMAL;
/* Error: count statistics */
if (sr & SR_ERROR) {
iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -183,10 +174,8 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
unsigned char value;
unsigned int *pointer_write = &channel->pointer_write;
if (channel->nb_bytes <= 0) {
channel->nb_bytes = 0;
if (channel->nb_bytes == 0)
return;
}
value = channel->tty_port.xmit_buf[*pointer_write];
iowrite8(value, &channel->regs->w.thr);
@@ -194,39 +183,27 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel)
(*pointer_write)++;
*pointer_write = *pointer_write % PAGE_SIZE;
channel->nb_bytes--;
if ((channel->nb_bytes == 0) &&
(waitqueue_active(&channel->queue))) {
if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) {
*channel->board_write = 1;
wake_up_interruptible(&channel->queue);
}
}
}
static void ipoctal_irq_channel(struct ipoctal_channel *channel)
{
u8 isr, sr;
/* If there is no client, skip the check */
if (!atomic_read(&channel->open))
return;
spin_lock(&channel->lock);
/* The HW is organized in pair of channels. See which register we need
* to read from */
isr = ioread8(&channel->block_regs->r.isr);
sr = ioread8(&channel->regs->r.sr);
/* In case of RS-485, change from TX to RX when finishing TX.
* Half-duplex. */
if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) &&
(sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) {
iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
*channel->board_write = 1;
wake_up_interruptible(&channel->queue);
/* In case of RS-485, change from TX to RX when finishing TX.
* Half-duplex. */
if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr);
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
channel->rx_enable = 1;
}
}
/* RX data */
@@ -237,7 +214,7 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel)
if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY))
ipoctal_irq_tx(channel);
tty_flip_buffer_push(&channel->tty_port);
spin_unlock(&channel->lock);
}
static irqreturn_t ipoctal_irq_handler(void *arg)
@@ -245,14 +222,14 @@ static irqreturn_t ipoctal_irq_handler(void *arg)
unsigned int i;
struct ipoctal *ipoctal = (struct ipoctal *) arg;
/* Check all channels */
for (i = 0; i < NR_CHANNELS; i++)
ipoctal_irq_channel(&ipoctal->channel[i]);
/* Clear the IPack device interrupt */
readw(ipoctal->int_space + ACK_INT_REQ0);
readw(ipoctal->int_space + ACK_INT_REQ1);
/* Check all channels */
for (i = 0; i < NR_CHANNELS; i++)
ipoctal_irq_channel(&ipoctal->channel[i]);
return IRQ_HANDLED;
}
@@ -306,7 +283,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
ipoctal->mem8_space =
devm_ioremap_nocache(&ipoctal->dev->dev,
region->start, 0x8000);
if (!addr) {
if (!ipoctal->mem8_space) {
dev_err(&ipoctal->dev->dev,
"Unable to map slot [%d:%d] MEM8 space!\n",
bus_nr, slot);
@@ -319,7 +296,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
struct ipoctal_channel *channel = &ipoctal->channel[i];
channel->regs = chan_regs + i;
channel->block_regs = block_regs + (i >> 1);
channel->board_write = &ipoctal->write;
channel->board_id = ipoctal->board_id;
if (i & 1) {
channel->isr_tx_rdy_mask = ISR_TxRDY_B;
@@ -330,6 +306,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
}
iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
channel->rx_enable = 0;
iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY,
@@ -402,8 +379,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
ipoctal_reset_stats(&channel->stats);
channel->nb_bytes = 0;
init_waitqueue_head(&channel->queue);
spin_lock_init(&channel->lock);
channel->pointer_read = 0;
channel->pointer_write = 0;
@@ -414,12 +389,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
continue;
}
dev_set_drvdata(tty_dev, channel);
/*
* Enable again the RX. TX will be enabled when
* there is something to send
*/
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
}
return 0;
@@ -459,6 +428,7 @@ static int ipoctal_write_tty(struct tty_struct *tty,
/* As the IP-OCTAL 485 only supports half duplex, do it manually */
if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) {
iowrite8(CR_DISABLE_RX, &channel->regs->w.cr);
channel->rx_enable = 0;
iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr);
}
@@ -467,10 +437,6 @@ static int ipoctal_write_tty(struct tty_struct *tty,
* operations
*/
iowrite8(CR_ENABLE_TX, &channel->regs->w.cr);
wait_event_interruptible(channel->queue, *channel->board_write);
iowrite8(CR_DISABLE_TX, &channel->regs->w.cr);
*channel->board_write = 0;
return char_copied;
}
@@ -622,8 +588,9 @@ static void ipoctal_set_termios(struct tty_struct *tty,
iowrite8(mr2, &channel->regs->w.mr);
iowrite8(csr, &channel->regs->w.csr);
/* Enable again the RX */
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
/* Enable again the RX, if it was before */
if (channel->rx_enable)
iowrite8(CR_ENABLE_RX, &channel->regs->w.cr);
}
static void ipoctal_hangup(struct tty_struct *tty)
@@ -643,6 +610,7 @@ static void ipoctal_hangup(struct tty_struct *tty)
tty_port_hangup(&channel->tty_port);
iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
channel->rx_enable = 0;
iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
@@ -652,6 +620,22 @@ static void ipoctal_hangup(struct tty_struct *tty)
wake_up_interruptible(&channel->tty_port.open_wait);
}
static void ipoctal_shutdown(struct tty_struct *tty)
{
struct ipoctal_channel *channel = tty->driver_data;
if (channel == NULL)
return;
iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr);
channel->rx_enable = 0;
iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr);
iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr);
clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags);
}
static const struct tty_operations ipoctal_fops = {
.ioctl = NULL,
.open = ipoctal_open,
@@ -662,6 +646,7 @@ static const struct tty_operations ipoctal_fops = {
.chars_in_buffer = ipoctal_chars_in_buffer,
.get_icount = ipoctal_get_icount,
.hangup = ipoctal_hangup,
.shutdown = ipoctal_shutdown,
};
static int ipoctal_probe(struct ipack_device *dev)