mtd: nand: fix generating over-boundary ECC data when writing
When mtk_ecc_encode() is writing the ECC parity data to the OOB
region,because each register is 4 bytes in length,but the len's unit is
in bytes,the operation in the for loop will cross the ECC's boundary.
Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This commit is contained in:
committed by
Boris Brezillon
parent
3be7988674
commit
7a35328992
@@ -366,7 +366,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
|
|||||||
u8 *data, u32 bytes)
|
u8 *data, u32 bytes)
|
||||||
{
|
{
|
||||||
dma_addr_t addr;
|
dma_addr_t addr;
|
||||||
u32 *p, len, i;
|
u8 *p;
|
||||||
|
u32 len, i, val;
|
||||||
int ret = 0;
|
int ret = 0;
|
||||||
|
|
||||||
addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE);
|
addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE);
|
||||||
@@ -392,11 +393,14 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config,
|
|||||||
|
|
||||||
/* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
|
/* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
|
||||||
len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
|
len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
|
||||||
p = (u32 *)(data + bytes);
|
p = data + bytes;
|
||||||
|
|
||||||
/* write the parity bytes generated by the ECC back to the OOB region */
|
/* write the parity bytes generated by the ECC back to the OOB region */
|
||||||
for (i = 0; i < len; i++)
|
for (i = 0; i < len; i++) {
|
||||||
p[i] = readl(ecc->regs + ECC_ENCPAR(i));
|
if ((i % 4) == 0)
|
||||||
|
val = readl(ecc->regs + ECC_ENCPAR(i / 4));
|
||||||
|
p[i] = (val >> ((i % 4) * 8)) & 0xff;
|
||||||
|
}
|
||||||
timeout:
|
timeout:
|
||||||
|
|
||||||
dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
|
dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE);
|
||||||
|
|||||||
Reference in New Issue
Block a user