dt-bindings: remove 'interrupt-parent' from bindings

'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/spi/fsl-spi.txt

@@ -12,8 +12,6 @@ Required properties:
   information for the interrupt.  This should be encoded based on
   the information in section 2) depending on the type of interrupt
   controller you have.
-- interrupt-parent : the phandle for the interrupt controller that
-  services interrupts for this device.
 - clock-frequency : input clock frequency to non FSL_SOC cores
 
 Optional properties:

Documentation/devicetree/bindings/spi/sh-hspi.txt

@@ -6,8 +6,6 @@ Required properties:
 		       - "renesas,hspi-r8a7778" (R-Car M1)
 		       - "renesas,hspi-r8a7779" (R-Car H1)
 - reg              : Offset and length of the register set for the device
-- interrupt-parent : The phandle for the interrupt controller that
-		     services interrupts for this device
 - interrupts       : Interrupt specifier
 - #address-cells   : Must be <1>
 - #size-cells      : Must be <0>

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -29,8 +29,6 @@ Required properties:
 			 If two register sets are present, the first is to be
 			 used by the CPU, and the second is to be used by the
 			 DMA engine.
-- interrupt-parent     : The phandle for the interrupt controller that
-			 services interrupts for this device
 - interrupts           : Interrupt specifier
 - #address-cells       : Must be <1>
 - #size-cells          : Must be <0>

Documentation/devicetree/bindings/spi/spi-cadence.txt

@@ -6,7 +6,6 @@ Required properties:
 - reg			: Physical base address and size of SPI registers map.
 - interrupts		: Property with a value describing the interrupt
 			  number.
-- interrupt-parent	: Must be core interrupt controller
 - clock-names		: List of input clock names - "ref_clk", "pclk"
 			  (See clock bindings for details).
 - clocks		: Clock phandles (see clock bindings for details).

Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt

@@ -4,7 +4,6 @@ Required properties:
 - compatible :
   - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc
 - reg : address and length of the lpspi master registers
-- interrupt-parent : core interrupt controller
 - interrupts : lpspi interrupt
 - clocks : lpspi clock specifier
 

Documentation/devicetree/bindings/spi/spi-rspi.txt

@@ -28,8 +28,6 @@ Required properties:
 		       - "rx" for SPRI,
 		       - "tx" to SPTI,
 		       - "mux" for a single muxed interrupt.
-- interrupt-parent : The phandle for the interrupt controller that
-		     services interrupts for this device.
 - num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
 - #address-cells   : Must be <1>
 - #size-cells      : Must be <0>

Documentation/devicetree/bindings/spi/spi-xilinx.txt

@@ -6,7 +6,6 @@ Required properties:
 - reg			: Physical base address and size of SPI registers map.
 - interrupts		: Property with a value describing the interrupt
 			  number.
-- interrupt-parent	: Must be core interrupt controller
 
 Optional properties:
 - xlnx,num-ss-bits	: Number of chip selects used.

Documentation/devicetree/bindings/spi/spi-xlp.txt

@@ -13,7 +13,6 @@ Required properties:
 - reg			: Should contain register location and length.
 - clocks		: Phandle of the spi clock
 - interrupts		: Interrupt number used by this controller.
-- interrupt-parent	: Phandle of the parent interrupt controller.
 
 SPI slave nodes must be children of the SPI master node and can contain
 properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.

Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt

@@ -6,7 +6,6 @@ Required properties:
 - reg			: Physical base address and size of GQSPI registers map.
 - interrupts		: Property with a value describing the interrupt
 			  number.
-- interrupt-parent	: Must be core interrupt controller.
 - clock-names		: List of input clock names - "ref_clk", "pclk"
 			  (See clock bindings for details).
 - clocks		: Clock phandles (see clock bindings for details).