Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 - new Xilixn VDMA driver from Srikanth
 - bunch of updates for edma driver by Thomas, Joel and Peter
 - fixes and updates on dw, ste_dma, freescale, mpc512x, sudmac etc

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (45 commits)
  dmaengine: sh: don't use dynamic static allocation
  dmaengine: sh: fix print specifier warnings
  dmaengine: sh: make shdma_prep_dma_cyclic static
  dmaengine: Kconfig: Update MXS_DMA help text to include MX6Q/MX6DL
  of: dma: Grammar s/requests/request/, s/used required/required/
  dmaengine: shdma: Enable driver compilation with COMPILE_TEST
  dmaengine: rcar-hpbdma: Include linux/err.h
  dmaengine: sudmac: Include linux/err.h
  dmaengine: sudmac: Keep #include sorted alphabetically
  dmaengine: shdmac: Include linux/err.h
  dmaengine: shdmac: Keep #include sorted alphabetically
  dmaengine: s3c24xx-dma: Add cyclic transfer support
  dmaengine: s3c24xx-dma: Process whole SG chain
  dmaengine: imx: correct sdmac->status for cyclic dma tx
  dmaengine: pch: fix compilation for alpha target
  dmaengine: dw: check return code of dma_async_device_register()
  dmaengine: dw: fix regression in dw_probe() function
  dmaengine: dw: enable clock before access
  dma: pch_dma: Fix Kconfig dependencies
  dmaengine: mpc512x: add support for peripheral transfers
  ...

Documentation/devicetree/bindings/dma/mmp-dma.txt

@@ -1,17 +1,20 @@
 * MARVELL MMP DMA controller
 
 Marvell Peripheral DMA Controller
-Used platfroms: pxa688, pxa910, pxa3xx, etc
+Used platforms: pxa688, pxa910, pxa3xx, etc
 
 Required properties:
 - compatible: Should be "marvell,pdma-1.0"
 - reg: Should contain DMA registers location and length.
 - interrupts: Either contain all of the per-channel DMA interrupts
 		or one irq for pdma device
-- #dma-channels: Number of DMA channels supported by the controller.
+
+Optional properties:
+- #dma-channels: Number of DMA channels supported by the controller (defaults
+  to 32 when not specified)
 
 "marvell,pdma-1.0"
-Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
+Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
 
 Examples:
 
@@ -45,7 +48,7 @@ pdma: dma-controller@d4000000 {
 
 
 Marvell Two Channel DMA Controller used specifically for audio
-Used platfroms: pxa688, pxa910
+Used platforms: pxa688, pxa910
 
 Required properties:
 - compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"

Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt

@@ -0,0 +1,75 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+- dma-channel child node: Should have at least one channel and can have up to
+	two channels per device. This node specifies the properties of each
+	DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells configured for Scatter-mode in
+	the hardware.
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+	It takes following values:
+	{1}, flush both channels
+	{2}, flush mm2s channel
+	{3}, flush s2mm channel
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
+	"xlnx,axi-vdma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,data-width: Should contain the stream data width, take values
+	{32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+	Realignment Engine.
+- xlnx,genlock-mode: Tells Genlock synchronization is
+	enabled/disabled in hardware.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@40030000 {
+	compatible = "xlnx,axi-vdma-1.00.a";
+	#dma_cells = <1>;
+	reg = < 0x40030000 0x10000 >;
+	xlnx,num-fstores = <0x8>;
+	xlnx,flush-fsync = <0x1>;
+	dma-channel@40030000 {
+		compatible = "xlnx,axi-vdma-mm2s-channel";
+		interrupts = < 0 54 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+	dma-channel@40030030 {
+		compatible = "xlnx,axi-vdma-s2mm-channel";
+		interrupts = < 0 53 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+	where Channel ID is '0' for write/tx and '1' for read/rx
+	channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+	compatible ="xlnx,axi-vdma-test-1.00.a";
+	dmas = <&axi_vdma_0 0
+		&axi_vdma_0 1>;
+	dma-names = "vdma0", "vdma1";
+} ;