Merge tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

arch/arm/boot/dts/omap5.dtsi

@@ -82,6 +82,12 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -810,6 +816,8 @@
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
 				ctrl-module = <&omap_control_usb2phy>;
+				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
 			};
 
@@ -876,6 +884,46 @@
 
 			#thermal-sensor-cells = <1>;
 		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4a090000 0x20>;
+			ranges;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4a096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
 	};
 };