Merge branch 'linus' into x86/timers

Pick up upstream changes to avoid conflicts
This commit is contained in:
Thomas Gleixner
2018-07-19 23:11:52 +02:00
638 changed files with 6161 additions and 3382 deletions

View File

@@ -61,6 +61,7 @@ obj-y += alternative.o i8253.o hw_breakpoint.o
obj-y += tsc.o tsc_msr.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
obj-y += resource.o
obj-y += irqflags.o
obj-y += process.o
obj-y += fpu/

View File

@@ -543,7 +543,9 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
nodes_per_socket = ((value >> 3) & 7) + 1;
}
if (c->x86 >= 0x15 && c->x86 <= 0x17) {
if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
!boot_cpu_has(X86_FEATURE_VIRT_SSBD) &&
c->x86 >= 0x15 && c->x86 <= 0x17) {
unsigned int bit;
switch (c->x86) {

View File

@@ -155,7 +155,8 @@ x86_virt_spec_ctrl(u64 guest_spec_ctrl, u64 guest_virt_spec_ctrl, bool setguest)
guestval |= guest_spec_ctrl & x86_spec_ctrl_mask;
/* SSBD controlled in MSR_SPEC_CTRL */
if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD))
if (static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) ||
static_cpu_has(X86_FEATURE_AMD_SSBD))
hostval |= ssbd_tif_to_spec_ctrl(ti->flags);
if (hostval != guestval) {
@@ -533,9 +534,10 @@ static enum ssb_mitigation __init __ssb_select_mitigation(void)
* Intel uses the SPEC CTRL MSR Bit(2) for this, while AMD may
* use a completely different MSR and bit dependent on family.
*/
if (!static_cpu_has(X86_FEATURE_MSR_SPEC_CTRL))
if (!static_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD) &&
!static_cpu_has(X86_FEATURE_AMD_SSBD)) {
x86_amd_ssb_disable();
else {
} else {
x86_spec_ctrl_base |= SPEC_CTRL_SSBD;
x86_spec_ctrl_mask |= SPEC_CTRL_SSBD;
wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);

View File

@@ -106,7 +106,8 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
memset(line, 0, LINE_SIZE);
length = strncpy_from_user(line, buf, LINE_SIZE - 1);
len = min_t(size_t, len, LINE_SIZE - 1);
length = strncpy_from_user(line, buf, len);
if (length < 0)
return length;

View File

@@ -0,0 +1,26 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <asm/asm.h>
#include <asm/export.h>
#include <linux/linkage.h>
/*
* unsigned long native_save_fl(void)
*/
ENTRY(native_save_fl)
pushf
pop %_ASM_AX
ret
ENDPROC(native_save_fl)
EXPORT_SYMBOL(native_save_fl)
/*
* void native_restore_fl(unsigned long flags)
* %eax/%rdi: flags
*/
ENTRY(native_restore_fl)
push %_ASM_ARG1
popf
ret
ENDPROC(native_restore_fl)
EXPORT_SYMBOL(native_restore_fl)

View File

@@ -138,6 +138,7 @@ static unsigned long kvm_get_tsc_khz(void)
src = &hv_clock[cpu].pvti;
tsc_khz = pvclock_tsc_khz(src);
put_cpu();
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
return tsc_khz;
}
@@ -319,6 +320,8 @@ void __init kvmclock_init(void)
printk(KERN_INFO "kvm-clock: Using msrs %x and %x",
msr_kvm_system_time, msr_kvm_wall_clock);
pvclock_set_pvti_cpu0_va(hv_clock);
if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT))
pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT);
@@ -366,14 +369,11 @@ int __init kvm_setup_vsyscall_timeinfo(void)
vcpu_time = &hv_clock[cpu].pvti;
flags = pvclock_read_flags(vcpu_time);
if (!(flags & PVCLOCK_TSC_STABLE_BIT)) {
put_cpu();
return 1;
}
pvclock_set_pvti_cpu0_va(hv_clock);
put_cpu();
if (!(flags & PVCLOCK_TSC_STABLE_BIT))
return 1;
kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK;
#endif
return 0;

View File

@@ -221,6 +221,11 @@ static void notrace start_secondary(void *unused)
#ifdef CONFIG_X86_32
/* switch away from the initial page table */
load_cr3(swapper_pg_dir);
/*
* Initialize the CR4 shadow before doing anything that could
* try to read it.
*/
cr4_init_shadow();
__flush_tlb_all();
#endif
load_current_idt();