Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (39 commits)
  Add missing maintainer countries in CREDITS
  Fix bytes <-> kilobytes  typo in Kconfig for ramdisk
  fix a typo in Documentation/pi-futex.txt
  BUG_ON conversion for fs/xfs/
  BUG_ON() conversion in fs/nfsd/
  BUG_ON conversion for fs/reiserfs
  BUG_ON cleanups in arch/i386
  BUG_ON cleanup in drivers/net/tokenring/
  BUG_ON cleanup for drivers/md/
  kerneldoc-typo in led-class.c
  debugfs: spelling fix
  rcutorture: Fix incorrect description of default for nreaders parameter
  parport: Remove space in function calls
  Michal Wronski: update contact info
  Spelling fix: "control" instead of "cotrol"
  reboot parameter in Documentation/kernel-parameters.txt
  Fix copy&waste bug in comment in scripts/kernel-doc
  remove duplicate "until" from kernel/workqueue.c
  ite_gpio fix tabbage
  fix file specification in comments
  ...

Fixed trivial path conflicts due to removed files:
   arch/mips/dec/boot/decstation.c, drivers/char/ite_gpio.c

Documentation/video4linux/README.pvrusb2

@@ -155,7 +155,7 @@ Source file list / functional overview:
   pvrusb2-i2c-core.[ch] - This module provides an implementation of a
     kernel-friendly I2C adaptor driver, through which other external
     I2C client drivers (e.g. msp3400, tuner, lirc) may connect and
-    operate corresponding chips within the the pvrusb2 device.  It is
+    operate corresponding chips within the pvrusb2 device.  It is
     through here that other V4L modules can reach into this driver to
     operate specific pieces (and those modules are in turn driven by
     glue logic which is coordinated by pvrusb2-hdw, doled out by

Documentation/video4linux/Zoran

@@ -144,7 +144,7 @@ tv broadcast formats all aver the world.
 
 The CCIR defines parameters needed for broadcasting the signal.
 The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
-The CCIR says not much about about the colorsystem used !!!
+The CCIR says not much about the colorsystem used !!!
 And talking about a colorsystem says not to much about how it is broadcast.
 
 The CCIR standards A,E,F are not used any more.

Documentation/video4linux/cx2341x/fw-decoder-api.txt

@@ -102,7 +102,7 @@ Param[0]
 Name 	CX2341X_DEC_GET_XFER_INFO
 Enum 	9/0x09
 Description
-	This API call may be used to detect an end of stream condtion.
+	This API call may be used to detect an end of stream condition.
 Result[0]
 	Stream type
 Result[1]

Documentation/video4linux/cx2341x/fw-encoder-api.txt

@@ -280,7 +280,7 @@ Param[0]
 Param[1]
 	Unknown, but leaving this to 0 seems to work best. Indications are that
 	this might have to do with USB support, although passing anything but 0
-	onl breaks things.
+	only breaks things.
 
 -------------------------------------------------------------------------------
 

Documentation/video4linux/cx2341x/fw-osd-api.txt

@@ -97,7 +97,7 @@ Result[0]
 Result[1]
 	top left vertical offset
 Result[2]
-	bottom right hotizontal offset
+	bottom right horizontal offset
 Result[3]
 	bottom right vertical offset
 

Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt

@@ -30,7 +30,7 @@ provide for a handler)
 GP_SAMPLE register is at 0x35C058
 
 Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
 You need to recover the actual RC5 bits out of the (oversampled) IR sensor
 bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data)  An
 actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.

Documentation/video4linux/et61x251.txt

@@ -80,7 +80,7 @@ Some of the features of the driver are:
   high compression quality (see also "Notes for V4L2 application developers"
   paragraph);
 - full support for the capabilities of every possible image sensors that can
-  be connected to the ET61X[12]51 bridges, including, for istance, red, green,
+  be connected to the ET61X[12]51 bridges, including, for instance, red, green,
   blue and global gain adjustments and exposure control (see "Supported
   devices" paragraph for details);
 - use of default color settings for sunlight conditions;
@@ -222,7 +222,7 @@ identifier - of the camera registered as "/dev/video0":
 	[root@localhost #] echo 1 > i2c_reg
 	[root@localhost #] cat i2c_val
 
-Note that if the sensor registers can not be read, "cat" will fail.
+Note that if the sensor registers cannot be read, "cat" will fail.
 To avoid race conditions, all the I/O accesses to the files are serialized.
 
 

Documentation/video4linux/hauppauge-wintv-cx88-ir.txt

@@ -30,7 +30,7 @@ provide for a handler)
 GP_SAMPLE register is at 0x35C058
 
 Bits are then right shifted into the GP_SAMPLE register at the specified
-rate; you get an interrupt when a full DWORD is recieved.
+rate; you get an interrupt when a full DWORD is received.
 You need to recover the actual RC5 bits out of the (oversampled) IR sensor
 bits. (Hint: look for the 0/1and 1/0 crossings of the RC5 bi-phase data)  An
 actual raw RC5 code will span 2-3 DWORDS, depending on the actual alignment.

Documentation/video4linux/meye.txt

@@ -29,7 +29,7 @@ driver (PCI vendor/device is 0x136b/0xff01)
 
 The third one, present in recent (more or less last year) Picturebooks
 (C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the develoment of a GPL
+to the developers under a NDA (which allows the development of a GPL
 driver however), but things are not moving very fast (see
 http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
 

Documentation/video4linux/sn9c102.txt

@@ -60,7 +60,7 @@ It's worth to note that SONiX has never collaborated with the author during the
 development of this project, despite several requests for enough detailed
 specifications of the register tables, compression engine and video data format
 of the above chips. Nevertheless, these informations are no longer necessary,
-becouse all the aspects related to these chips are known and have been
+because all the aspects related to these chips are known and have been
 described in detail in this documentation.
 
 The driver relies on the Video4Linux2 and USB core modules. It has been
@@ -85,7 +85,7 @@ Some of the features of the driver are:
   high compression quality (see also "Notes for V4L2 application developers"
   and "Video frame formats" paragraphs);
 - full support for the capabilities of many of the possible image sensors that
-  can be connected to the SN9C10x bridges, including, for istance, red, green,
+  can be connected to the SN9C10x bridges, including, for instance, red, green,
   blue and global gain adjustments and exposure (see "Supported devices"
   paragraph for details);
 - use of default color settings for sunlight conditions;

Documentation/video4linux/w9968cf.txt

@@ -15,7 +15,7 @@ Index
 5.  Supported devices
 6.  Module dependencies
 7.  Module loading
-8.  Module paramaters
+8.  Module parameters
 9.  Contact information
 10. Credits
 

Documentation/video4linux/zr36120.txt

@@ -118,9 +118,9 @@ card is not there, please try if any other card gives some
 response, and mail me if you got a working tvcard addition.
 
 PS. <TVCard editors behold!)
-    Dont forget to set video_input to the number of inputs
+    Don't forget to set video_input to the number of inputs
     you defined in the video_mux part of the tvcard definition.
-    Its a common error to add a channel but not incrementing
+    It's a common error to add a channel but not incrementing
     video_input and getting angry with me/v4l/linux/linus :(
 
 You are now ready to test the framegrabber with your favorite