xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Koodi Ongelmat Pull-pyynnöt Actions Paketit Projektit Julkaisut Wiki Toiminta

ARM: dts: imx6qdl-apalis/-colibri: fix on-module regulators

Selaa lähdekoodia 
Remove the 2.5V regulator, it does not exist. There is 3.3V and
3.3V_AUDIO provided to the module through the edge connector,
model those as fixed regulators like we use to do in other
Colibri device trees. The SGTL5000 uses 3.3V_AUDIO as VDDA. Note
that the driver derives the analog ground voltage (VAG) from this
supply. The new value should allow higher output swings before
clipping occurs. Refer to the SGTL5000 datasheet for details.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Stefan Agner
2018-07-09 17:48:46 +02:00
committed by Shawn Guo
vanhempi 7034de4118
commit 7060066d3e
2 muutettua tiedostoa jossa 21 lisäystä ja 21 poistoa
Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/boot/dts/imx6qdl-apalis.dtsi
Näytä tiedosto

@@ -61,17 +61,17 @@
status = "disabled";
};
reg_2p5v: regulator-2p5v {
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-name = "+V3.3_AUDIO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -314,8 +314,8 @@
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
};
/* STMPE811 touch screen controller */
@@ -447,7 +447,7 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
vqmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
disable-wp;
no-1-8-v;
@@ -458,7 +458,7 @@
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vqmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_module_3v3>;
bus-width = <4>;
disable-wp;
no-1-8-v;
@@ -469,7 +469,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
vqmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;

20
arch/arm/boot/dts/imx6qdl-colibri.dtsi
Näytä tiedosto

@@ -56,17 +56,17 @@
status = "disabled";
};
reg_2p5v: regulator-2p5v {
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-name = "+V3.3_AUDIO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
@@ -244,8 +244,8 @@
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
lrclk-strength = <3>;
};
@@ -380,7 +380,7 @@
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
disable-wp;
vqmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_module_3v3>;
bus-width = <4>;
no-1-8-v;
status = "disabled";
@@ -390,7 +390,7 @@
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
vqmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;