Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
   - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
   - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  HyperBus changes:
   - DMA support for TI's AM654 HyperBus controller driver.
   - HyperBus frontend driver for Renesas RPC-IF driver.

  SPI NOR core changes:
   - Support for Winbond w25q64jwm flash
   - Enable 4K sector support for mx25l12805d

  SPI NOR controller drivers changes:
   - intel-spi Add Alder Lake-S PCI ID

  MTD Core changes:
   - mtdoops: Don't run panic write twice
   - mtdconcat: Correctly handle panic write
   - Use DEFINE_SHOW_ATTRIBUTE"

* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
  mtd: hyperbus: add Renesas RPC-IF driver
  Revert "mtd: spi-nor: Prefer asynchronous probe"
  mtd: parsers: bcm63xx: Do not make it modular
  mtd: spear_smi: Enable compile testing
  mtd: maps: vmu-flash: fix typos for struct memcard
  mtd: physmap: Add Baikal-T1 physically mapped ROM support
  mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
  mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
  mtd: rawnand: cadence: remove a redundant dev_err call
  mtd: rawnand: ams-delta: Fix non-OF build warning
  mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
  mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
  mtd: rawnand: atmel: Check return values for nand_read_data_op
  mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
  mtd: rawnand: qcom: Simplify with dev_err_probe()
  mtd: rawnand: marvell: Fix and update kerneldoc
  mtd: rawnand: marvell: Simplify with dev_err_probe()
  mtd: rawnand: gpmi: Simplify with dev_err_probe()
  mtd: rawnand: atmel: Simplify with dev_err_probe()
  ...

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -55,6 +55,37 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
+      nand-ecc-engine:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/phandle
+        description: |
+          A phandle on the hardware ECC engine if any. There are
+          basically three possibilities:
+          1/ The ECC engine is part of the NAND controller, in this
+          case the phandle should reference the parent node.
+          2/ The ECC engine is part of the NAND part (on-die), in this
+          case the phandle should reference the node itself.
+          3/ The ECC engine is external, in this case the phandle should
+          reference the specific ECC engine node.
+
+      nand-use-soft-ecc-engine:
+        type: boolean
+        description: Use a software ECC engine.
+
+      nand-no-ecc-engine:
+        type: boolean
+        description: Do not use any ECC correction.
+
+      nand-ecc-placement:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ oob, interleaved ]
+        description:
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+
       nand-ecc-algo:
         description:
           Desired ECC algorithm.