bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switch

Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch
which needs to be driven slightly differently from the traditional
external switches. This patch introduces changes in arch/mips/bcm63xx in order
to:

- register a bcm63xx_enetsw driver instead of bcm63xx_enet driver
- update DMA channels configuration & state RAM base addresses
- add a new platform data configuration knob to define the number of
  ports per switch/device and force link on some ports
- define the required switch registers

On the driver side, the following changes are required:

- the switch ports need to be polled to ensure the link is up and
  running and RX/TX can properly work
- basic switch configuration needs to be performed for the switch to
  forward packets to the CPU
- update the MIB counters since the integrated

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bcm63xx_enet.h

@@ -18,6 +18,7 @@
 
 /* maximum burst len for dma (4 bytes unit) */
 #define BCMENET_DMA_MAXBURST	16
+#define BCMENETSW_DMA_MAXBURST	8
 
 /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
  * must be low enough so that a DMA transfer of above burst length can
@@ -84,11 +85,60 @@
 #define ETH_MIB_RX_CNTRL			54
 
 
+/*
+ * SW MIB Counters register definitions
+*/
+#define ETHSW_MIB_TX_ALL_OCT			0
+#define ETHSW_MIB_TX_DROP_PKTS			2
+#define ETHSW_MIB_TX_QOS_PKTS			3
+#define ETHSW_MIB_TX_BRDCAST			4
+#define ETHSW_MIB_TX_MULT			5
+#define ETHSW_MIB_TX_UNI			6
+#define ETHSW_MIB_TX_COL			7
+#define ETHSW_MIB_TX_1_COL			8
+#define ETHSW_MIB_TX_M_COL			9
+#define ETHSW_MIB_TX_DEF			10
+#define ETHSW_MIB_TX_LATE			11
+#define ETHSW_MIB_TX_EX_COL			12
+#define ETHSW_MIB_TX_PAUSE			14
+#define ETHSW_MIB_TX_QOS_OCT			15
+
+#define ETHSW_MIB_RX_ALL_OCT			17
+#define ETHSW_MIB_RX_UND			19
+#define ETHSW_MIB_RX_PAUSE			20
+#define ETHSW_MIB_RX_64				21
+#define ETHSW_MIB_RX_65_127			22
+#define ETHSW_MIB_RX_128_255			23
+#define ETHSW_MIB_RX_256_511			24
+#define ETHSW_MIB_RX_512_1023			25
+#define ETHSW_MIB_RX_1024_1522			26
+#define ETHSW_MIB_RX_OVR			27
+#define ETHSW_MIB_RX_JAB			28
+#define ETHSW_MIB_RX_ALIGN			29
+#define ETHSW_MIB_RX_CRC			30
+#define ETHSW_MIB_RX_GD_OCT			31
+#define ETHSW_MIB_RX_DROP			33
+#define ETHSW_MIB_RX_UNI			34
+#define ETHSW_MIB_RX_MULT			35
+#define ETHSW_MIB_RX_BRDCAST			36
+#define ETHSW_MIB_RX_SA_CHANGE			37
+#define ETHSW_MIB_RX_FRAG			38
+#define ETHSW_MIB_RX_OVR_DISC			39
+#define ETHSW_MIB_RX_SYM			40
+#define ETHSW_MIB_RX_QOS_PKTS			41
+#define ETHSW_MIB_RX_QOS_OCT			42
+#define ETHSW_MIB_RX_1523_2047			44
+#define ETHSW_MIB_RX_2048_4095			45
+#define ETHSW_MIB_RX_4096_8191			46
+#define ETHSW_MIB_RX_8192_9728			47
+
+
 struct bcm_enet_mib_counters {
 	u64 tx_gd_octets;
 	u32 tx_gd_pkts;
 	u32 tx_all_octets;
 	u32 tx_all_pkts;
+	u32 tx_unicast;
 	u32 tx_brdcast;
 	u32 tx_mult;
 	u32 tx_64;
@@ -97,7 +147,12 @@ struct bcm_enet_mib_counters {
 	u32 tx_256_511;
 	u32 tx_512_1023;
 	u32 tx_1024_max;
+	u32 tx_1523_2047;
+	u32 tx_2048_4095;
+	u32 tx_4096_8191;
+	u32 tx_8192_9728;
 	u32 tx_jab;
+	u32 tx_drop;
 	u32 tx_ovr;
 	u32 tx_frag;
 	u32 tx_underrun;
@@ -114,6 +169,7 @@ struct bcm_enet_mib_counters {
 	u32 rx_all_octets;
 	u32 rx_all_pkts;
 	u32 rx_brdcast;
+	u32 rx_unicast;
 	u32 rx_mult;
 	u32 rx_64;
 	u32 rx_65_127;
@@ -197,6 +253,9 @@ struct bcm_enet_priv {
 	/* number of dma desc in tx ring */
 	int tx_ring_size;
 
+	/* maximum dma burst size */
+	int dma_maxburst;
+
 	/* cpu view of rx dma ring */
 	struct bcm_enet_desc *tx_desc_cpu;
 
@@ -269,6 +328,18 @@ struct bcm_enet_priv {
 
 	/* maximum hardware transmit/receive size */
 	unsigned int hw_mtu;
+
+	bool enet_is_sw;
+
+	/* port mapping for switch devices */
+	int num_ports;
+	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+	int sw_port_link[ENETSW_MAX_PORT];
+
+	/* used to poll switch port state */
+	struct timer_list swphy_poll;
+	spinlock_t enetsw_mdio_lock;
 };
 
+
 #endif /* ! BCM63XX_ENET_H_ */