mfd: Add STMPE1600 support

STMPE1600 is a 16-bit port expander.
Datasheet is available here :
http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html

Signed-off-by: Amelie DELAUNAY <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Patrice Chotard
2016-08-10 09:39:14 +02:00
committed by Lee Jones
parent bd495916f2
commit 6bb9f0d933
4 changed files with 84 additions and 5 deletions

View File

@@ -552,6 +552,59 @@ static struct stmpe_variant_info stmpe610 = {
.get_altfunc = stmpe811_get_altfunc,
};
/*
* STMPE1600
* Compared to all others STMPE variant, LSB and MSB regs are located in this
* order : LSB addr
* MSB addr + 1
* As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
*/
static const u8 stmpe1600_regs[] = {
[STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
[STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
[STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
[STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
[STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
[STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
[STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
[STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
[STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
[STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
[STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
[STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
};
static struct stmpe_variant_block stmpe1600_blocks[] = {
{
.cell = &stmpe_gpio_cell,
.irq = 0,
.block = STMPE_BLOCK_GPIO,
},
};
static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
if (blocks & STMPE_BLOCK_GPIO)
return 0;
else
return -EINVAL;
}
static struct stmpe_variant_info stmpe1600 = {
.name = "stmpe1600",
.id_val = STMPE1600_ID,
.id_mask = 0xffff,
.num_gpios = 16,
.af_bits = 0,
.regs = stmpe1600_regs,
.blocks = stmpe1600_blocks,
.num_blocks = ARRAY_SIZE(stmpe1600_blocks),
.num_irqs = STMPE1600_NR_INTERNAL_IRQS,
.enable = stmpe1600_enable,
};
/*
* STMPE1601
*/
@@ -949,6 +1002,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
[STMPE610] = &stmpe610,
[STMPE801] = &stmpe801,
[STMPE811] = &stmpe811,
[STMPE1600] = &stmpe1600,
[STMPE1601] = &stmpe1601,
[STMPE1801] = &stmpe1801,
[STMPE2401] = &stmpe2401,
@@ -975,7 +1029,8 @@ static irqreturn_t stmpe_irq(int irq, void *data)
int ret;
int i;
if (variant->id_val == STMPE801_ID) {
if (variant->id_val == STMPE801_ID ||
variant->id_val == STMPE1600_ID) {
int base = irq_create_mapping(stmpe->domain, 0);
handle_nested_irq(base);
@@ -1149,13 +1204,13 @@ static int stmpe_chip_init(struct stmpe *stmpe)
return ret;
if (stmpe->irq >= 0) {
if (id == STMPE801_ID)
if (id == STMPE801_ID || id == STMPE1600_ID)
icr = STMPE_SYS_CTRL_INT_EN;
else
icr = STMPE_ICR_LSB_GIM;
/* STMPE801 doesn't support Edge interrupts */
if (id != STMPE801_ID) {
/* STMPE801 and STMPE1600 don't support Edge interrupts */
if (id != STMPE801_ID && id != STMPE1600_ID) {
if (irq_trigger == IRQF_TRIGGER_FALLING ||
irq_trigger == IRQF_TRIGGER_RISING)
icr |= STMPE_ICR_LSB_EDGE;
@@ -1163,7 +1218,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
if (irq_trigger == IRQF_TRIGGER_RISING ||
irq_trigger == IRQF_TRIGGER_HIGH) {
if (id == STMPE801_ID)
if (id == STMPE801_ID || id == STMPE1600_ID)
icr |= STMPE_SYS_CTRL_INT_HI;
else
icr |= STMPE_ICR_LSB_HIGH;