xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
포크 0
코드 이슈 풀 리퀘스트 Actions Packages Projects 릴리즈 위키 활동

net: phy: marvell: fix detection of PHY on Topaz switches

소스 검색 
commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream.

Since commit fee2d54641 ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.

This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.

This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.

Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.

Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.

Prior this change Topaz's internal PHY is detected by kernel as:

  PHY [...] driver [Marvell 88E6390] (irq=63)

And afterwards as:

  PHY [...] driver [Marvell 88E6341 Family] (irq=63)

Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d54641 ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Pali Rohár
2021-04-12 18:57:39 +02:00
committed by Greg Kroah-Hartman
부모 fbe6603e7c
커밋 6ac98ee9cb
3개의 변경된 파일과 46개의 추가작업 그리고 22개의 파일을 삭제
Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/net/dsa/mv88e6xxx/chip.c
파일 보기

@@ -2994,10 +2994,17 @@ out_resources:
return err;
}
/* prod_id for switch families which do not have a PHY model number */
static const u16 family_prod_id_table[] = {
[MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
[MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
};
static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
{
struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
struct mv88e6xxx_chip *chip = mdio_bus->chip;
u16 prod_id;
u16 val;
int err;
@@ -3008,23 +3015,12 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
mv88e6xxx_reg_unlock(chip);
if (reg == MII_PHYSID2) {
/* Some internal PHYs don't have a model number. */
if (chip->info->family != MV88E6XXX_FAMILY_6165)
/* Then there is the 6165 family. It gets is
* PHYs correct. But it can also have two
* SERDES interfaces in the PHY address
* space. And these don't have a model
* number. But they are not PHYs, so we don't
* want to give them something a PHY driver
* will recognise.
*
* Use the mv88e6390 family model number
* instead, for anything which really could be
* a PHY,
*/
if (!(val & 0x3f0))
val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
/* Some internal PHYs don't have a model number. */
if (reg == MII_PHYSID2 && !(val & 0x3f0) &&
chip->info->family < ARRAY_SIZE(family_prod_id_table)) {
prod_id = family_prod_id_table[chip->info->family];
if (prod_id)
val |= prod_id >> 4;
}
return err ? err : val;