Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
parent e02169b682
commit 6ab3d5624e
2972 changed files with 0 additions and 2976 deletions
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -7,7 +7,6 @@
 *
 *  $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
 */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -23,7 +23,6 @@
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
-#include <linux/config.h>
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
--- a/drivers/serial/68328serial.h
+++ b/drivers/serial/68328serial.h
@@ -11,7 +11,6 @@
 #ifndef _MC683XX_SERIAL_H
 #define _MC683XX_SERIAL_H

-#include <linux/config.h>

 struct serial_struct {
 	int	type;
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -20,7 +20,6 @@
 *	int rs_360_init(void);
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -19,7 +19,6 @@
 *  mapbase is the physical address of the IO port.
 *  membase is an 'ioremapped' cookie.
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -15,7 +15,6 @@
 *  $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
 */

-#include <linux/config.h>
 #include <linux/serial_8250.h>

 struct old_serial_port {
--- a/drivers/serial/8250_mca.c
+++ b/drivers/serial/8250_mca.c
@@ -8,7 +8,6 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mca.h>
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -31,7 +31,6 @@
 * required, these have to be supplied via some other means (eg, GPIO)
 * and hooked into this driver.
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -31,7 +31,6 @@
 * required, these have to be supplied via some other means (eg, GPIO)
 * and hooked into this driver.
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/at91_serial.c
+++ b/drivers/serial/at91_serial.c
@@ -22,7 +22,6 @@
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -25,7 +25,6 @@
 *  $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
 *
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -31,7 +31,6 @@
 *
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -27,7 +27,6 @@
 *
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -27,7 +27,6 @@
 *
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -425,7 +425,6 @@

 static char *serial_version = "$Revision: 1.25 $";

-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
--- a/drivers/serial/crisv10.h
+++ b/drivers/serial/crisv10.h
@@ -7,7 +7,6 @@
 #ifndef _ETRAX_SERIAL_H
 #define _ETRAX_SERIAL_H

-#include <linux/config.h>
 #include <linux/circ_buf.h>
 #include <asm/termios.h>

--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -26,7 +26,6 @@

 #undef DEBUG_DZ

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -24,7 +24,6 @@
  */
 #define SERIAL_DO_RESTART
 #include <linux/module.h>
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -25,7 +25,6 @@
 * [29-Mar-2005] Mike Lee
 * Added hardware handshake
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -12,7 +12,6 @@
 *  Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org)
 *  Copyright (C) 2002 David S. Miller (davem@redhat.com)
 */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -25,7 +25,6 @@
 *  membase is an 'ioremapped' cookie.  This is compatible with the old
 *  serial.c driver, and is currently the preferred form.
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/m32r_sio.h
+++ b/drivers/serial/m32r_sio.h
@@ -15,7 +15,6 @@
 * (at your option) any later version.
 */

-#include <linux/config.h>

 struct m32r_sio_probe {
 	struct module	*owner;
--- a/drivers/serial/m32r_sio_reg.h
+++ b/drivers/serial/m32r_sio_reg.h
@@ -15,7 +15,6 @@
 #ifndef _M32R_SIO_REG_H
 #define _M32R_SIO_REG_H

-#include <linux/config.h>

 #ifdef CONFIG_SERIAL_M32R_PLDSIO

--- a/drivers/serial/mcfserial.h
+++ b/drivers/serial/mcfserial.h
@@ -14,7 +14,6 @@
 #ifndef _MCF_SERIAL_H
 #define _MCF_SERIAL_H

-#include <linux/config.h>
 #include <linux/serial.h>

 #ifdef __KERNEL__
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -44,7 +44,6 @@
 * will be mapped to.
 */

-#include <linux/config.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/tty.h>
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -50,7 +50,6 @@
 * 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
 */

-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -16,7 +16,6 @@
 **
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -42,7 +42,6 @@
 #undef DEBUG_HARD
 #undef USE_CTRL_O_SYSRQ

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>

--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -24,7 +24,6 @@
 * with the serial core maintainer satisfaction to appear soon.
 */

-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -55,7 +55,6 @@
 * BJD, 04-Nov-2004
 */

-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -24,7 +24,6 @@
 *  $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
 *
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -22,7 +22,6 @@
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/slab.h>
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -27,7 +27,6 @@
 *
 */

-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -38,7 +38,6 @@
 *		Fix some spin_locks.
 *		Do not call uart_add_one_port for absent ports.
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -20,7 +20,6 @@

 #undef DEBUG

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -10,7 +10,6 @@
 *  Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
 *  Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
 */
-#include <linux/config.h>
 #include <linux/serial_core.h>

 #if defined(__H8300H__) || defined(__H8300S__)
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -37,7 +37,6 @@
 * http://oss.sgi.com/projects/GenInfo/NoticeExplan
 */

-#include <linux/config.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/serial.h>
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -10,7 +10,6 @@
 * Copyright (C) 2002 David S. Miller (davem@redhat.com)
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/console.h>
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -15,7 +15,6 @@
 *   David S. Miller <davem@davemloft.net>
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -15,7 +15,6 @@
 *   David S. Miller (davem@davemloft.net), 2002-Jul-29
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -12,7 +12,6 @@
 *  Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
 */

-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -19,7 +19,6 @@
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-#include <linux/config.h>

 #if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ