Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Intel Cherry Trail Whiskey Cove PMIC
   - TI LP87565 PMIC

  New Device Support:
   - Add support for Cannonlake to intel-lpss-pci
   - Add support for Simatic IOT2000 to intel_quark_i2c_gpio

  New Functionality:
   - Add Regulator support (axp20x)

  Fix-ups:
   - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec)
   - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core)
   - Provide deregistration on unbind (rn5t618)
   - Rework DT code/documentation (arizona)
   - Constify things (fsl-imx25-tsadc)
   - MAINTAINERS updates (DA9062/61)
   - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C)
   - Switch to DMI matching (intel_quark_i2c_gpio)
   - Provide an appropriate level of error checking (wm831x-{i2c,spi},
     twl4030-irq, tc6393xb)
   - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc,
     stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc,
     exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099,
     motorola-cpcap)"

[ Skipped the last commit in that series that added eight thousand
  lines of pointless repeated register definitions.  - Linus ]

* tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits)
  mfd: Add LP87565 PMIC support
  mfd: cros_ec: Free IRQ on exit
  dt-bindings: vendor-prefixes: Add arctic to vendor prefix
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: da9061: Fix to remove BBAT_CONT register from chip model
  mfd: axp20x-i2c: Document that this must be builtin on x86
  mfd: Add Cherry Trail Whiskey Cove PMIC driver
  mfd: tc6393xb: Handle return value of clk_prepare_enable
  mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform
  mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency
  mfd: motorola-cpcap: Use devm_of_platform_populate()
  mfd: smsc-ece: Use devm_of_platform_populate()
  mfd: qcom-spmi-pmic: Use devm_of_platform_populate()
  mfd: palmas: Use devm_of_platform_populate()
  mfd: exynos: Use devm_of_platform_populate()
  mfd: fsl-imx25: Use devm_of_platform_populate()
  mfd: cros_ec: Use devm_of_platform_populate()
  mfd: atmel: Use devm_of_platform_populate()
  mfd: stm32-timers: Use devm_of_platform_populate()
  mfd: intel_soc_pmic: Select designware i2c-bus driver
  ...

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -30,7 +30,8 @@ Required properties:
 
   - gpio-controller : Indicates this device is a GPIO controller.
   - #gpio-cells : Must be 2. The first cell is the pin number and the
-    second cell is used to specify optional parameters (currently unused).
+    second cell is used to specify optional parameters, see ../gpio/gpio.txt
+    for details.
 
   - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
     as covered in Documentation/devicetree/bindings/regulator/regulator.txt

Documentation/devicetree/bindings/mfd/lp87565.txt

@@ -0,0 +1,43 @@
+TI LP87565 PMIC MFD driver
+
+Required properties:
+  - compatible:	"ti,lp87565", "ti,lp87565-q1"
+  - reg:		I2C slave address.
+  - gpio-controller:	Marks the device node as a GPIO Controller.
+  - #gpio-cells:	Should be two.  The first cell is the pin number and
+			the second cell is used to specify flags.
+			See ../gpio/gpio.txt for more information.
+  - xxx-in-supply:	Phandle to parent supply node of each regulator
+			populated under regulators node. xxx should match
+			the supply_name populated in driver.
+Example:
+
+lp87565_pmic: pmic@60 {
+	compatible = "ti,lp87565-q1";
+	reg = <0x60>;
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	buck10-in-supply = <&vsys_3v3>;
+	buck23-in-supply = <&vsys_3v3>;
+
+	regulators: regulators {
+		buck10_reg: buck10 {
+			/* VDD_MPU */
+			regulator-name = "buck10";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		buck23_reg: buck23 {
+			/* VDD_GPU */
+			regulator-name = "buck23";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -29,6 +29,7 @@ andestech	Andes Technology Corporation
 apm	Applied Micro Circuits Corporation (APM)
 aptina	Aptina Imaging
 arasan	Arasan Chip Systems
+arctic	Arctic Sand
 aries	Aries Embedded GmbH
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL