Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq code updates from Thomas Gleixner:
 "The irq department proudly presents:

   - Another tree wide sweep of irq infrastructure abuse.  Clear winner
     of the trainwreck engineering contest was:
         #include "../../../kernel/irq/settings.h"

   - Tree wide update of irq_set_affinity() callbacks which miss a cpu
     online check when picking a single cpu out of the affinity mask.

   - Tree wide consolidation of interrupt statistics.

   - Updates to the threaded interrupt infrastructure to allow explicit
     wakeup of the interrupt thread and a variant of synchronize_irq()
     which synchronizes only the hard interrupt handler.  Both are
     needed to replace the homebrewn thread handling in the mmc/sdhci
     code.

   - New irq chip callbacks to allow proper support for GPIO based irqs.
     The GPIO based interrupts need to request/release GPIO resources
     from request/free_irq.

   - A few new ARM interrupt chips.  No revolutionary new hardware, just
     differently wreckaged variations of the scheme.

   - Small improvments, cleanups and updates all over the place"

I was hoping that that trainwreck engineering contest was a April Fools'
joke.  But no.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  irqchip: sun7i/sun6i: Disable NMI before registering the handler
  ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller
  ARM: sun7i/sun6i: irqchip: Update the documentation
  ARM: sun7i/sun6i: dts: Add NMI irqchip support
  ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller
  genirq: Export symbol no_action()
  arm: omap: Fix typo in ams-delta-fiq.c
  m68k: atari: Fix the last kernel_stat.h fallout
  irqchip: sun4i: Simplify sun4i_irq_ack
  irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
  genirq: procfs: Make smp_affinity values go+r
  softirq: Add linux/irq.h to make it compile again
  m68k: amiga: Add linux/irq.h to make it compile again
  irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0
  irqchip: sun4i: Fix a comment about mask register initialization
  irqchip: sun4i: Fix irq 0 not working
  genirq: Add a new IRQCHIP_EOI_THREADED flag
  genirq: Document IRQCHIP_ONESHOT_SAFE flag
  ARM: sunxi: dt: Convert to the new irq controller compatibles
  irqchip: sunxi: Change compatibles
  ...

arch/x86/kernel/cpu/mshyperv.c

@@ -17,6 +17,7 @@
 #include <linux/hardirq.h>
 #include <linux/efi.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <asm/processor.h>
 #include <asm/hypervisor.h>
 #include <asm/hyperv.h>
@@ -31,6 +32,45 @@
 struct ms_hyperv_info ms_hyperv;
 EXPORT_SYMBOL_GPL(ms_hyperv);
 
+#if IS_ENABLED(CONFIG_HYPERV)
+static void (*vmbus_handler)(void);
+
+void hyperv_vector_handler(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+	exit_idle();
+
+	inc_irq_stat(irq_hv_callback_count);
+	if (vmbus_handler)
+		vmbus_handler();
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+void hv_setup_vmbus_irq(void (*handler)(void))
+{
+	vmbus_handler = handler;
+	/*
+	 * Setup the IDT for hypervisor callback. Prevent reallocation
+	 * at module reload.
+	 */
+	if (!test_bit(HYPERVISOR_CALLBACK_VECTOR, used_vectors))
+		alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR,
+				hyperv_callback_vector);
+}
+
+void hv_remove_vmbus_irq(void)
+{
+	/* We have no way to deallocate the interrupt gate */
+	vmbus_handler = NULL;
+}
+EXPORT_SYMBOL_GPL(hv_setup_vmbus_irq);
+EXPORT_SYMBOL_GPL(hv_remove_vmbus_irq);
+#endif
+
 static uint32_t  __init ms_hyperv_platform(void)
 {
 	u32 eax;
@@ -119,41 +159,3 @@ const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
 	.init_platform		= ms_hyperv_init_platform,
 };
 EXPORT_SYMBOL(x86_hyper_ms_hyperv);
-
-#if IS_ENABLED(CONFIG_HYPERV)
-static int vmbus_irq = -1;
-static irq_handler_t vmbus_isr;
-
-void hv_register_vmbus_handler(int irq, irq_handler_t handler)
-{
-	/*
-	 * Setup the IDT for hypervisor callback.
-	 */
-	alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, hyperv_callback_vector);
-
-	vmbus_irq = irq;
-	vmbus_isr = handler;
-}
-
-void hyperv_vector_handler(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct irq_desc *desc;
-
-	irq_enter();
-	exit_idle();
-
-	desc = irq_to_desc(vmbus_irq);
-
-	if (desc)
-		generic_handle_irq_desc(vmbus_irq, desc);
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-#else
-void hv_register_vmbus_handler(int irq, irq_handler_t handler)
-{
-}
-#endif
-EXPORT_SYMBOL_GPL(hv_register_vmbus_handler);

arch/x86/kernel/hpet.c

@@ -521,7 +521,7 @@ static int hpet_setup_irq(struct hpet_dev *dev)
 {
 
 	if (request_irq(dev->irq, hpet_interrupt_handler,
-			IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
+			IRQF_TIMER | IRQF_NOBALANCING,
 			dev->name, dev))
 		return -1;
 

arch/x86/kernel/irq.c

@@ -124,6 +124,12 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
 	seq_printf(p, "  Machine check polls\n");
+#endif
+#if defined(CONFIG_HYPERV) || defined(CONFIG_XEN)
+	seq_printf(p, "%*s: ", prec, "THR");
+	for_each_online_cpu(j)
+		seq_printf(p, "%10u ", irq_stats(j)->irq_hv_callback_count);
+	seq_printf(p, "  Hypervisor callback interrupts\n");
 #endif
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
 #if defined(CONFIG_X86_IO_APIC)

arch/x86/kernel/time.c

@@ -62,7 +62,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction irq0  = {
 	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+	.flags = IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
 	.name = "timer"
 };