Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Minor line offset auto-merges.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller
2012-11-17 22:00:43 -05:00
384 changed files with 4492 additions and 2372 deletions

View File

@@ -1,7 +1,7 @@
/* atomic.h: Thankfully the V9 is at least reasonable for this
* stuff.
*
* Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
* Copyright (C) 1996, 1997, 2000, 2012 David S. Miller (davem@redhat.com)
*/
#ifndef __ARCH_SPARC64_ATOMIC__
@@ -106,6 +106,8 @@ static inline long atomic64_add_unless(atomic64_t *v, long a, long u)
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
extern long atomic64_dec_if_positive(atomic64_t *v);
/* Atomic operations are already serializing */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()

View File

@@ -1,6 +1,46 @@
#ifndef _SPARC64_BACKOFF_H
#define _SPARC64_BACKOFF_H
/* The macros in this file implement an exponential backoff facility
* for atomic operations.
*
* When multiple threads compete on an atomic operation, it is
* possible for one thread to be continually denied a successful
* completion of the compare-and-swap instruction. Heavily
* threaded cpu implementations like Niagara can compound this
* problem even further.
*
* When an atomic operation fails and needs to be retried, we spin a
* certain number of times. At each subsequent failure of the same
* operation we double the spin count, realizing an exponential
* backoff.
*
* When we spin, we try to use an operation that will cause the
* current cpu strand to block, and therefore make the core fully
* available to any other other runnable strands. There are two
* options, based upon cpu capabilities.
*
* On all cpus prior to SPARC-T4 we do three dummy reads of the
* condition code register. Each read blocks the strand for something
* between 40 and 50 cpu cycles.
*
* For SPARC-T4 and later we have a special "pause" instruction
* available. This is implemented using writes to register %asr27.
* The cpu will block the number of cycles written into the register,
* unless a disrupting trap happens first. SPARC-T4 specifically
* implements pause with a granularity of 8 cycles. Each strand has
* an internal pause counter which decrements every 8 cycles. So the
* chip shifts the %asr27 value down by 3 bits, and writes the result
* into the pause counter. If a value smaller than 8 is written, the
* chip blocks for 1 cycle.
*
* To achieve the same amount of backoff as the three %ccr reads give
* on earlier chips, we shift the backoff value up by 7 bits. (Three
* %ccr reads block for about 128 cycles, 1 << 7 == 128) We write the
* whole amount we want to block into the pause register, rather than
* loop writing 128 each time.
*/
#define BACKOFF_LIMIT (4 * 1024)
#ifdef CONFIG_SMP
@@ -11,16 +51,25 @@
#define BACKOFF_LABEL(spin_label, continue_label) \
spin_label
#define BACKOFF_SPIN(reg, tmp, label) \
mov reg, tmp; \
88: brnz,pt tmp, 88b; \
sub tmp, 1, tmp; \
set BACKOFF_LIMIT, tmp; \
cmp reg, tmp; \
bg,pn %xcc, label; \
nop; \
ba,pt %xcc, label; \
sllx reg, 1, reg;
#define BACKOFF_SPIN(reg, tmp, label) \
mov reg, tmp; \
88: rd %ccr, %g0; \
rd %ccr, %g0; \
rd %ccr, %g0; \
.section .pause_3insn_patch,"ax";\
.word 88b; \
sllx tmp, 7, tmp; \
wr tmp, 0, %asr27; \
clr tmp; \
.previous; \
brnz,pt tmp, 88b; \
sub tmp, 1, tmp; \
set BACKOFF_LIMIT, tmp; \
cmp reg, tmp; \
bg,pn %xcc, label; \
nop; \
ba,pt %xcc, label; \
sllx reg, 1, reg;
#else

View File

@@ -232,9 +232,10 @@ static inline void __user *arch_compat_alloc_user_space(long len)
struct pt_regs *regs = current_thread_info()->kregs;
unsigned long usp = regs->u_regs[UREG_I6];
if (!(test_thread_flag(TIF_32BIT)))
if (test_thread_64bit_stack(usp))
usp += STACK_BIAS;
else
if (test_thread_flag(TIF_32BIT))
usp &= 0xffffffffUL;
usp -= len;

View File

@@ -196,7 +196,22 @@ extern unsigned long get_wchan(struct task_struct *task);
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->tpc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->u_regs[UREG_FP])
#define cpu_relax() barrier()
/* Please see the commentary in asm/backoff.h for a description of
* what these instructions are doing and how they have been choosen.
* To make a long story short, we are trying to yield the current cpu
* strand during busy loops.
*/
#define cpu_relax() asm volatile("\n99:\n\t" \
"rd %%ccr, %%g0\n\t" \
"rd %%ccr, %%g0\n\t" \
"rd %%ccr, %%g0\n\t" \
".section .pause_3insn_patch,\"ax\"\n\t"\
".word 99b\n\t" \
"wr %%g0, 128, %%asr27\n\t" \
"nop\n\t" \
"nop\n\t" \
".previous" \
::: "memory")
/* Prefetch support. This is tuned for UltraSPARC-III and later.
* UltraSPARC-I will treat these as nops, and UltraSPARC-II has

View File

@@ -63,5 +63,10 @@ extern char *of_console_options;
extern void irq_trans_init(struct device_node *dp);
extern char *build_path_component(struct device_node *dp);
/* SPARC has a local implementation */
extern int of_address_to_resource(struct device_node *dev, int index,
struct resource *r);
#define of_address_to_resource of_address_to_resource
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */

View File

@@ -259,6 +259,11 @@ static inline bool test_and_clear_restore_sigmask(void)
#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
#define thread32_stack_is_64bit(__SP) (((__SP) & 0x1) != 0)
#define test_thread_64bit_stack(__SP) \
((test_thread_flag(TIF_32BIT) && !thread32_stack_is_64bit(__SP)) ? \
false : true)
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */

View File

@@ -372,7 +372,9 @@ etrap_spill_fixup_64bit: \
/* Normal 32bit spill */
#define SPILL_2_GENERIC(ASI) \
srl %sp, 0, %sp; \
and %sp, 1, %g3; \
brnz,pn %g3, (. - (128 + 4)); \
srl %sp, 0, %sp; \
stwa %l0, [%sp + %g0] ASI; \
mov 0x04, %g3; \
stwa %l1, [%sp + %g3] ASI; \
@@ -398,14 +400,16 @@ etrap_spill_fixup_64bit: \
stwa %i6, [%g1 + %g0] ASI; \
stwa %i7, [%g1 + %g3] ASI; \
saved; \
retry; nop; nop; \
retry; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
#define SPILL_2_GENERIC_ETRAP \
etrap_user_spill_32bit: \
srl %sp, 0, %sp; \
and %sp, 1, %g3; \
brnz,pn %g3, etrap_user_spill_64bit; \
srl %sp, 0, %sp; \
stwa %l0, [%sp + 0x00] %asi; \
stwa %l1, [%sp + 0x04] %asi; \
stwa %l2, [%sp + 0x08] %asi; \
@@ -427,7 +431,7 @@ etrap_user_spill_32bit: \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; \
nop; nop; nop; nop; \
nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit;
@@ -592,7 +596,9 @@ user_rtt_fill_64bit: \
/* Normal 32bit fill */
#define FILL_2_GENERIC(ASI) \
srl %sp, 0, %sp; \
and %sp, 1, %g3; \
brnz,pn %g3, (. - (128 + 4)); \
srl %sp, 0, %sp; \
lduwa [%sp + %g0] ASI, %l0; \
mov 0x04, %g2; \
mov 0x08, %g3; \
@@ -616,14 +622,16 @@ user_rtt_fill_64bit: \
lduwa [%g1 + %g3] ASI, %i6; \
lduwa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; nop; nop; \
retry; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
#define FILL_2_GENERIC_RTRAP \
user_rtt_fill_32bit: \
srl %sp, 0, %sp; \
and %sp, 1, %g3; \
brnz,pn %g3, user_rtt_fill_64bit; \
srl %sp, 0, %sp; \
lduwa [%sp + 0x00] %asi, %l0; \
lduwa [%sp + 0x04] %asi, %l1; \
lduwa [%sp + 0x08] %asi, %l2; \
@@ -643,7 +651,7 @@ user_rtt_fill_32bit: \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; \
nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup;

View File

@@ -405,8 +405,13 @@
#define __NR_setns 337
#define __NR_process_vm_readv 338
#define __NR_process_vm_writev 339
#define __NR_kern_features 340
#define __NR_kcmp 341
#define NR_syscalls 340
#define NR_syscalls 342
/* Bitmask values returned from kern_features system call. */
#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,