Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - We get support for running in big-endian mode on two platforms:
     sunxi (Allwinner) and s3c24xx (old Samsung).

   - The recently added Uniphier platform now uses standard PSCI methods
     for SMP booting and we remove support for old bootloader versions
     that did not support it yet.

   - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
     close relative of the Allwinner A13 and R8 chips.

   - PXA completes its move over to the generic dmaengine framework and
     removes its old private API

   - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
     with integrated 802.11ac wireless networking"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: imx legacy: pca100: move peripheral initialization to .init_late
  ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
  ARM: imx legacy: pcm043: move peripheral initialization to .init_late
  ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
  ARM: imx legacy: vpr200: move peripheral initialization to .init_late
  ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
  ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
  ARM: imx legacy: qong: move peripheral initialization to .init_late
  ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
  ARM: imx legacy: pcm037: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
  ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
  ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
  ARM: imx legacy: kzm: move peripheral initialization to .init_late
  MAINTAINERS: update list of Oxnas maintainers
  ARM: orion5x: remove extraneous NO_IRQ
  ARM: orion: simplify orion_ge00_switch_init
  ...

arch/arm/mach-imx/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC

arch/arm/mach-imx/common.h

@@ -104,7 +104,7 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(bool enable);
+void imx6_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
 

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm(true);
+	imx6_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/cpuidle-imx6sx.c

@@ -9,6 +9,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/module.h>
+#include <asm/cacheflush.h>
 #include <asm/cpuidle.h>
 #include <asm/suspend.h>
 
@@ -17,6 +18,15 @@
 
 static int imx6sx_idle_finish(unsigned long val)
 {
+	/*
+	 * for Cortex-A7 which has an internal L2
+	 * cache, need to flush it before powering
+	 * down ARM platform, since flushing L1 cache
+	 * here again has very small overhead, compared
+	 * to adding conditional code for L2 cache type,
+	 * just call flush_cache_all() is fine.
+	 */
+	flush_cache_all();
 	cpu_do_idle();
 
 	return 0;
@@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 
 int __init imx6sx_cpuidle_init(void)
 {
+	imx6_set_int_mem_clk_lpm(true);
 	imx6_enable_rbc(false);
 	/*
 	 * set ARM power up/down timing to the fastest,

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -493,24 +493,12 @@ static void __init armadillo5x0_init(void)
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	armadillo5x0_smc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	armadillo5x0_smc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_imx_uart1(&uart_pdata);
 
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-
 	/* Register FB */
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
@@ -527,21 +515,39 @@ static void __init armadillo5x0_init(void)
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
 		   mx3_ccm_base + MXC_CCM_RCSR);
+}
+
+static void __init armadillo5x0_late(void)
+{
+	armadillo5x0_smc911x_resources[1].start =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	armadillo5x0_smc911x_resources[1].end =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx_add_gpio_keys(&armadillo5x0_button_data);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+	if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
+		if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
+			armadillo5x0_i2c_rtc.irq =
+				gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
 		else
 			gpio_free(ARMADILLO5X0_RTC_GPIO);
 	}
+
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-
 	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT);
 	if (usbotg_pdata.otg)
@@ -565,5 +571,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.init_irq = mx31_init_irq,
 	.init_time	= armadillo5x0_timer_init,
 	.init_machine = armadillo5x0_init,
+	.init_late	= armadillo5x0_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -540,7 +540,6 @@ static void __init visstrim_m10_revision(void)
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
-	int mo_version;
 
 	imx27_soc_init();
 	visstrim_m10_revision();
@@ -550,11 +549,6 @@ static void __init visstrim_m10_board_init(void)
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
-	ret = gpio_request_array(visstrim_m10_gpios,
-				ARRAY_SIZE(visstrim_m10_gpios));
-	if (ret)
-		pr_err("Failed to request gpios (%d)\n", ret);
-
 	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
@@ -566,12 +560,26 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
-	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_late_init(void)
+{
+	int mo_version, ret;
+
+	ret = gpio_request_array(visstrim_m10_gpios,
+				 ARRAY_SIZE(visstrim_m10_gpios));
+	if (ret)
+		pr_err("Failed to request gpios (%d)\n", ret);
+
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
 				sizeof(snd_mx27vis_pdata));
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
+
 	gpio_led_register_device(0, &visstrim_m10_led_data);
 
 	/* Use mother board version to decide what video devices we shall use */
@@ -591,6 +599,7 @@ static void __init visstrim_m10_board_init(void)
 		visstrim_deinterlace_init();
 		visstrim_analog_camera_init();
 	}
+
 	visstrim_coda_init();
 }
 
@@ -607,5 +616,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.init_irq = mx27_init_irq,
 	.init_time	= visstrim_m10_timer_init,
 	.init_machine = visstrim_m10_board_init,
+	.init_late	= visstrim_m10_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6ul.c

@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6ul_enet_clk_init(void)
 {
@@ -80,6 +81,8 @@ static void __init imx6ul_init_irq(void)
 
 static void __init imx6ul_init_late(void)
 {
+	imx6sx_cpuidle_init();
+
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -245,13 +245,17 @@ static void __init kzm_board_init(void)
 
 	mxc_iomux_setup_multiple_pins(kzm_pins,
 				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
 	kzm_init_imx_uart();
 
 	pr_info("Clock input source is 26MHz\n");
 }
 
+static void __init kzm_late_init(void)
+{
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+}
+
 /*
  * This structure defines static mappings for the kzm-arm11-01 board.
  */
@@ -291,5 +295,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.init_irq = mx31_init_irq,
 	.init_time	= kzm_timer_init,
 	.init_machine = kzm_board_init,
+	.init_late	= kzm_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx21ads.c

@@ -302,12 +302,16 @@ static void __init mx21ads_board_init(void)
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
 	imx21_add_imx_fb(&mx21ads_fb_data);
+}
+
+static void __init mx21ads_late_init(void)
+{
+	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	mx21ads_cs8900_resources[1].start =
 			gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
@@ -328,6 +332,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
 	.init_time	= mx21ads_timer_init,
-	.init_machine = mx21ads_board_init,
+	.init_machine	= mx21ads_board_init,
+	.init_late	= mx21ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
-	int ret;
 	imx27_soc_init();
 
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt();
+
+	imx27_add_spi_imx1(&spi2_pdata);
+	imx27_add_spi_imx0(&spi1_pdata);
+
+	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+	int ret;
+
+	mx27_3ds_sdhc1_enable_level_translator();
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
 	otg_phy_init();
 
 	if (otg_mode_host) {
@@ -509,17 +524,12 @@ static void __init mx27pdk_init(void)
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
 	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
 	spi_register_board_info(mx27_3ds_spi_devs,
-						ARRAY_SIZE(mx27_3ds_spi_devs));
+				ARRAY_SIZE(mx27_3ds_spi_devs));
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	ret = gpio_request_array(mx27_3ds_camera_gpios,
 				 ARRAY_SIZE(mx27_3ds_camera_gpios));
@@ -529,7 +539,6 @@ static void __init mx27pdk_init(void)
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
@@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
+	.init_late	= mx27pdk_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx27ads.c

@@ -352,14 +352,20 @@ static void __init mx27ads_board_init(void)
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	mx27ads_regulator_init();
 	imx27_add_imx_fb(&mx27ads_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_mxc_w1();
+}
+
+static void __init mx27ads_late_init(void)
+{
+	mx27ads_regulator_init();
+
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_mxc_mmc(1, &sdhc2_pdata);
 
-	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_mxc_w1();
 }
 
 static void __init mx27ads_timer_init(void)
@@ -395,5 +401,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27ads_timer_init,
 	.init_machine = mx27ads_board_init,
+	.init_late	= mx27ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -694,8 +694,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init mx31_3ds_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	/* Configure SPI1 IOMUX */
@@ -708,14 +706,31 @@ static void __init mx31_3ds_init(void)
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
-	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(mx31_3ds_spi_devs,
-						ARRAY_SIZE(mx31_3ds_spi_devs));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
+	imx31_add_imx2_wdt();
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_ipu_core();
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+}
+
+static void __init mx31_3ds_late(void)
+{
+	int ret;
+
+	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(mx31_3ds_spi_devs,
+				ARRAY_SIZE(mx31_3ds_spi_devs));
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
 	mx31_3ds_usbotg_init();
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@@ -733,14 +748,9 @@ static void __init mx31_3ds_init(void)
 
 	if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
 		printk(KERN_WARNING "Init of the debug board failed, all "
-				    "devices on the debug board are unusable.\n");
-	imx31_add_imx2_wdt();
-	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+		       "devices on the debug board are unusable.\n");
 
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_ipu_core();
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -752,10 +762,6 @@ static void __init mx31_3ds_init(void)
 	}
 
 	mx31_3ds_init_camera();
-
-	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
-	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -778,6 +784,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
+	.init_late	= mx31_3ds_late,
 	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31ads.c

@@ -554,20 +554,19 @@ static void __init mx31ads_map_io(void)
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
 static void __init mx31ads_init(void)
 {
 	imx31_soc_init();
 
-	mxc_init_extuart();
 	mxc_init_imx_uart();
-	mxc_init_i2c();
 	mxc_init_audio();
+}
+
+static void __init mx31ads_late(void)
+{
+	mx31ads_init_expio();
+	mxc_init_extuart();
+	mxc_init_i2c();
 	mxc_init_ext_ethernet();
 }
 
@@ -581,8 +580,9 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.atag_offset = 0x100,
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
-	.init_irq = mx31ads_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_time	= mx31ads_timer_init,
 	.init_machine = mx31ads_init,
+	.init_late	= mx31ads_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lilly.c

@@ -56,6 +56,26 @@
  * appropriate baseboard support code.
  */
 
+static unsigned int mx31lilly_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
 /* SMSC ethernet support */
 
 static struct resource smsc91x_resources[] = {
@@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void)
 {
 	imx31_soc_init();
 
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
+	mxc_iomux_setup_multiple_pins(mx31lilly_pins,
+				      ARRAY_SIZE(mx31lilly_pins), "mx31lily");
+
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
 
@@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void)
 
 	imx31_add_spi_imx0(&spi0_pdata);
 	imx31_add_spi_imx1(&spi1_pdata);
-	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(&mc13783_dev, 1);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lilly_late_init(void)
+{
+	if (mx31lilly_baseboard == MX31LILLY_DB)
+		mx31lilly_db_init();
+
+	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(&mc13783_dev, 1);
 
 	smsc91x_resources[1].start =
 			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
@@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lilly_timer_init,
-	.init_machine = mx31lilly_board_init,
+	.init_machine	= mx31lilly_board_init,
+	.init_late	= mx31lilly_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lite.c

@@ -52,6 +52,19 @@
  */
 
 static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
 	/* SPI 1 */
@@ -64,6 +77,23 @@ static unsigned int mx31lite_pins[] = {
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
 static const struct mxc_nand_platform_data
 mx31lite_nand_board_info __initconst  = {
 	.width = 1,
@@ -103,13 +133,13 @@ static struct platform_device smsc911x_device = {
  * The MC13783 is the only hard-wired SPI device on the module.
  */
 
-static int spi_internal_chipselect[] = {
+static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
 static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
 
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
@@ -200,8 +230,6 @@ static struct platform_device physmap_flash_device = {
 	.num_resources = 1,
 };
 
-
-
 /*
  * This structure defines the MX31 memory map.
  */
@@ -233,29 +261,30 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 
 static void __init mx31lite_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
 	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lite_late(void)
+{
+	int ret;
+
+	if (mx31lite_baseboard == MX31LITE_DB)
+		mx31lite_db_init();
+
 	mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
@@ -265,8 +294,6 @@ static void __init mx31lite_init(void)
 	if (usbh2_pdata.otg)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -294,5 +321,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lite_timer_init,
 	.init_machine = mx31lite_init,
+	.init_late	= mx31lite_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx31moboard.c

@@ -526,11 +526,9 @@ static void __init mx31moboard_init(void)
 		"moboard");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
 	imx31_add_imx2_wdt();
 
-	moboard_uart0_init();
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);
 
@@ -540,6 +538,19 @@ static void __init mx31moboard_init(void)
 	imx31_add_spi_imx1(&moboard_spi1_pdata);
 	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
+	mx31moboard_init_cam();
+
+	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
+
+	pm_power_off = mx31moboard_poweroff;
+}
+
+static void __init mx31moboard_late(void)
+{
+	gpio_led_register_device(-1, &mx31moboard_led_pdata);
+
+	moboard_uart0_init();
+
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	moboard_spi_board_info[0].irq =
@@ -549,18 +560,11 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mx31moboard_init_cam();
-
 	usb_xcvr_reset();
-
 	moboard_usbh2_init();
 
-	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 
-	pm_power_off = mx31moboard_poweroff;
-
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -601,5 +605,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31moboard_timer_init,
 	.init_machine = mx31moboard_init,
+	.init_late	= mx31moboard_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -555,8 +555,6 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
-	struct platform_device *imx35_fb_pdev;
-
 	imx35_soc_init();
 
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@@ -579,9 +577,6 @@ static void __init mx35_3ds_init(void)
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
 	imx35_add_sdhci_esdhc_imx(0, NULL);
 
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
-		pr_warn("Init of the debugboard failed, all "
-				"devices on the debugboard are unusable.\n");
 	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 
 	i2c_register_board_info(
@@ -590,6 +585,15 @@ static void __init mx35_3ds_init(void)
 	imx35_add_ipu_core();
 	platform_device_register(&mx35_3ds_ov2640);
 	imx35_3ds_init_camera();
+}
+
+static void __init mx35_3ds_late_init(void)
+{
+	struct platform_device *imx35_fb_pdev;
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
+		pr_warn("Init of the debugboard failed, all "
+			"devices on the debugboard are unusable.\n");
 
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
@@ -618,6 +622,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.init_irq = mx35_init_irq,
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
+	.init_late	= mx35_3ds_late_init,
 	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pca100.c

@@ -362,12 +362,8 @@ static void __init pca100_init(void)
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
-	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
 	imx27_add_imx_uart0(&uart_pdata);
 
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-
 	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
@@ -382,6 +378,19 @@ static void __init pca100_init(void)
 				ARRAY_SIZE(pca100_spi_board_info));
 	imx27_add_spi_imx0(&pca100_spi0_data);
 
+	imx27_add_imx_fb(&pca100_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_imx2_wdt();
+	imx27_add_mxc_w1();
+}
+
+static void __init pca100_late_init(void)
+{
+	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
+
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
+
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
 	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
@@ -403,12 +412,6 @@ static void __init pca100_init(void)
 
 	if (usbh2_pdata.otg)
 		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_imx_fb(&pca100_fb_data);
-
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
 }
 
 static void __init pca100_timer_init(void)
@@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.init_machine = pca100_init,
+	.init_machine	= pca100_init,
+	.init_late	= pca100_late_init,
 	.init_time	= pca100_timer_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -576,8 +576,6 @@ static struct regulator_consumer_supply dummy_supplies[] = {
  */
 static void __init pcm037_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
@@ -621,20 +619,6 @@ static void __init pcm037_init(void)
 
 	imx31_add_mxc_w1();
 
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warn("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
 	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
@@ -643,10 +627,56 @@ static void __init pcm037_init(void)
 	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
+	if (otg_mode_host) {
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&otg_device_pdata);
+}
+
+static void __init pcm037_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static void __init pcm037_reserve(void)
+{
+	/* reserve 4 MiB for mx3-camera */
+	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
+			MX3_CAMERA_BUF_SIZE);
+}
+
+static void __init pcm037_init_late(void)
+{
+	int ret;
+
+	/* LAN9217 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (!ret) {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].start =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].end =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	} else {
+		pr_warn("could not get LAN irq gpio\n");
+	}
+
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
+
 	/* CSI */
 	/* Camera power: default - off */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
@@ -663,37 +693,6 @@ static void __init pcm037_init(void)
 			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
 	platform_device_register(&pcm970_sja1000);
 
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
-}
-
-static void __init pcm037_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
-static void __init pcm037_init_late(void)
-{
 	pcm037_eet_init_devices();
 }
 

arch/arm/mach-imx/mach-pcm043.c

@@ -363,7 +363,6 @@ static void __init pcm043_init(void)
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
 	imx35_add_imx_uart1(&uart_pdata);
 
@@ -387,6 +386,12 @@ static void __init pcm043_init(void)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1();
+}
+
+static void __init pcm043_late_init(void)
+{
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
+
 	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
@@ -402,6 +407,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.init_time = pcm043_timer_init,
-	.init_machine = pcm043_init,
+	.init_machine	= pcm043_init,
+	.init_late	= pcm043_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-qong.c

@@ -251,7 +251,6 @@ static void __init qong_init(void)
 
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
-	qong_init_fpga();
 	imx31_add_imx2_wdt();
 }
 
@@ -268,5 +267,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.init_irq = mx31_init_irq,
 	.init_time	= qong_timer_init,
 	.init_machine = qong_init,
+	.init_late	= qong_init_fpga,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-vpr200.c

@@ -268,6 +268,22 @@ static void __init vpr200_board_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt();
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	imx35_add_ipu_core();
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+}
+
+static void __init vpr200_late_init(void)
+{
 	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -282,18 +298,6 @@ static void __init vpr200_board_init(void)
 	else
 		gpio_direction_input(GPIO_PMIC_INT);
 
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
 	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
 	i2c_register_board_info(0, vpr200_i2c_devices,
 			ARRAY_SIZE(vpr200_i2c_devices));
@@ -313,5 +317,6 @@ MACHINE_START(VPR200, "VPR200")
 	.init_irq = mx35_init_irq,
 	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
+	.init_late	= vpr200_late_init,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mx31lilly-db.c

@@ -43,18 +43,6 @@
  */
 
 static unsigned int lilly_db_board_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 	MX31_PIN_CONTRAST__CONTRAST,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC support */
 
 static int mxc_mmc1_get_ro(struct device *dev)
@@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void)
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }

arch/arm/mach-imx/mx31lite-db.c

@@ -45,19 +45,6 @@
  */
 
 static unsigned int litekit_db_board_pins[] __initdata = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* SPI 0 */
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -67,11 +54,6 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC */
 
 static int gpio_det, gpio_wp;
@@ -146,19 +128,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.exit	   = mxc_mmc1_exit,
 };
 
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
 /* GPIO LEDs */
 
 static const struct gpio_led litekit_leds[] __initconst = {
@@ -187,9 +156,7 @@ void __init mx31lite_db_init(void)
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
 	gpio_led_register_device(-1, &litekit_led_platform_data);
 	imx31_add_imx2_wdt();
 	imx31_add_mxc_rtc();

arch/arm/mach-imx/pm-imx6.c

@@ -217,7 +217,7 @@ struct imx6_cpu_pm_info {
 	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 } __aligned(8);
 
-void imx6q_set_int_mem_clk_lpm(bool enable)
+void imx6_set_int_mem_clk_lpm(bool enable)
 {
 	u32 val = readl_relaxed(ccm_base + CGPR);
 
@@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		imx6_set_lpm(STOP_POWER_ON);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx_gpc_pre_suspend(false);
 		if (cpu_is_imx6sl())
 			imx6sl_set_wait_clk(true);
@@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		break;
 	case PM_SUSPEND_MEM:
 		imx6_set_lpm(STOP_POWER_OFF);
-		imx6q_set_int_mem_clk_lpm(false);
+		imx6_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
 		 * For suspend into ocram, asm code already take care of
@@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx_gpc_post_resume();
 		imx6_enable_rbc(false);
 		imx6q_enable_wb(false);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	default: