[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Jeff Garzik
205
drivers/ata/pata_rz1000.c
Normal file
205
drivers/ata/pata_rz1000.c
Normal file
@@ -0,0 +1,205 @@
|
||||
/*
|
||||
* RZ1000/1001 driver based upon
|
||||
*
|
||||
* linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
|
||||
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
|
||||
* Principal Author: mlord@pobox.com (Mark Lord)
|
||||
*
|
||||
* See linux/MAINTAINERS for address of current maintainer.
|
||||
*
|
||||
* This file provides support for disabling the buggy read-ahead
|
||||
* mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/delay.h>
|
||||
#include <scsi/scsi_host.h>
|
||||
#include <linux/libata.h>
|
||||
|
||||
#define DRV_NAME "pata_rz1000"
|
||||
#define DRV_VERSION "0.2.2"
|
||||
|
||||
|
||||
/**
|
||||
* rz1000_prereset - probe begin
|
||||
* @ap: ATA port
|
||||
*
|
||||
* Set up cable type and use generics
|
||||
*/
|
||||
|
||||
static int rz1000_prereset(struct ata_port *ap)
|
||||
{
|
||||
ap->cbl = ATA_CBL_PATA40;
|
||||
return ata_std_prereset(ap);
|
||||
}
|
||||
|
||||
/**
|
||||
* rz1000_error_handler - probe reset
|
||||
* @ap: ATA port
|
||||
*
|
||||
* Perform the ATA standard reset sequence
|
||||
*/
|
||||
|
||||
static void rz1000_error_handler(struct ata_port *ap)
|
||||
{
|
||||
ata_bmdma_drive_eh(ap, rz1000_prereset, ata_std_softreset, NULL, ata_std_postreset);
|
||||
}
|
||||
|
||||
/**
|
||||
* rz1000_set_mode - mode setting function
|
||||
* @ap: ATA interface
|
||||
*
|
||||
* Use a non standard set_mode function. We don't want to be tuned. We
|
||||
* would prefer to be BIOS generic but for the fact our hardware is
|
||||
* whacked out.
|
||||
*/
|
||||
|
||||
static void rz1000_set_mode(struct ata_port *ap)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ATA_MAX_DEVICES; i++) {
|
||||
struct ata_device *dev = &ap->device[i];
|
||||
if (ata_dev_enabled(dev)) {
|
||||
/* We don't really care */
|
||||
dev->pio_mode = XFER_PIO_0;
|
||||
dev->xfer_mode = XFER_PIO_0;
|
||||
dev->xfer_shift = ATA_SHIFT_PIO;
|
||||
dev->flags |= ATA_DFLAG_PIO;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static struct scsi_host_template rz1000_sht = {
|
||||
.module = THIS_MODULE,
|
||||
.name = DRV_NAME,
|
||||
.ioctl = ata_scsi_ioctl,
|
||||
.queuecommand = ata_scsi_queuecmd,
|
||||
.can_queue = ATA_DEF_QUEUE,
|
||||
.this_id = ATA_SHT_THIS_ID,
|
||||
.sg_tablesize = LIBATA_MAX_PRD,
|
||||
.max_sectors = ATA_MAX_SECTORS,
|
||||
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
||||
.emulated = ATA_SHT_EMULATED,
|
||||
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
||||
.proc_name = DRV_NAME,
|
||||
.dma_boundary = ATA_DMA_BOUNDARY,
|
||||
.slave_configure = ata_scsi_slave_config,
|
||||
.bios_param = ata_std_bios_param,
|
||||
};
|
||||
|
||||
static struct ata_port_operations rz1000_port_ops = {
|
||||
.set_mode = rz1000_set_mode,
|
||||
|
||||
.port_disable = ata_port_disable,
|
||||
.tf_load = ata_tf_load,
|
||||
.tf_read = ata_tf_read,
|
||||
.check_status = ata_check_status,
|
||||
.exec_command = ata_exec_command,
|
||||
.dev_select = ata_std_dev_select,
|
||||
|
||||
.error_handler = rz1000_error_handler,
|
||||
|
||||
.bmdma_setup = ata_bmdma_setup,
|
||||
.bmdma_start = ata_bmdma_start,
|
||||
.bmdma_stop = ata_bmdma_stop,
|
||||
.bmdma_status = ata_bmdma_status,
|
||||
|
||||
.qc_prep = ata_qc_prep,
|
||||
.qc_issue = ata_qc_issue_prot,
|
||||
.eng_timeout = ata_eng_timeout,
|
||||
.data_xfer = ata_pio_data_xfer,
|
||||
|
||||
.freeze = ata_bmdma_freeze,
|
||||
.thaw = ata_bmdma_thaw,
|
||||
.error_handler = rz1000_error_handler,
|
||||
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
||||
|
||||
.irq_handler = ata_interrupt,
|
||||
.irq_clear = ata_bmdma_irq_clear,
|
||||
|
||||
.port_start = ata_port_start,
|
||||
.port_stop = ata_port_stop,
|
||||
.host_stop = ata_host_stop
|
||||
};
|
||||
|
||||
/**
|
||||
* rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
|
||||
* @pdev: PCI device to register
|
||||
* @ent: Entry in rz1000_pci_tbl matching with @pdev
|
||||
*
|
||||
* Configure an RZ1000 interface. This doesn't require much special
|
||||
* handling except that we *MUST* kill the chipset readahead or the
|
||||
* user may experience data corruption.
|
||||
*/
|
||||
|
||||
static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
||||
{
|
||||
static int printed_version;
|
||||
struct ata_port_info *port_info[2];
|
||||
u16 reg;
|
||||
static struct ata_port_info info = {
|
||||
.sht = &rz1000_sht,
|
||||
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
||||
.pio_mask = 0x1f,
|
||||
.port_ops = &rz1000_port_ops
|
||||
};
|
||||
|
||||
if (!printed_version++)
|
||||
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
||||
|
||||
/* Be exceptionally paranoid as we must be sure to apply the fix */
|
||||
if (pci_read_config_word(pdev, 0x40, ®) != 0)
|
||||
goto fail;
|
||||
reg &= 0xDFFF;
|
||||
if (pci_write_config_word(pdev, 0x40, reg) != 0)
|
||||
goto fail;
|
||||
printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
|
||||
|
||||
port_info[0] = &info;
|
||||
port_info[1] = &info;
|
||||
return ata_pci_init_one(pdev, port_info, 2);
|
||||
fail:
|
||||
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
|
||||
/* Not safe to use so skip */
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static struct pci_device_id pata_rz1000[] = {
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
|
||||
{ 0, },
|
||||
};
|
||||
|
||||
static struct pci_driver rz1000_pci_driver = {
|
||||
.name = DRV_NAME,
|
||||
.id_table = pata_rz1000,
|
||||
.probe = rz1000_init_one,
|
||||
.remove = ata_pci_remove_one
|
||||
};
|
||||
|
||||
|
||||
static int __init rz1000_init(void)
|
||||
{
|
||||
return pci_register_driver(&rz1000_pci_driver);
|
||||
}
|
||||
|
||||
static void __exit rz1000_exit(void)
|
||||
{
|
||||
pci_unregister_driver(&rz1000_pci_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Alan Cox");
|
||||
MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DEVICE_TABLE(pci, pata_rz1000);
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
|
||||
module_init(rz1000_init);
|
||||
module_exit(rz1000_exit);
|
||||
|
||||
Reference in New Issue
Block a user