ide: add struct ide_dma_ops (take 3)

Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ide-tape.c

@@ -993,7 +993,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
 	stat = ide_read_status(drive);
 
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
-		if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
+		if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) {
 			/*
 			 * A DMA error is sometimes expected. For example,
 			 * if the tape is crossing a filemark during a
@@ -1213,7 +1213,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	/* Begin DMA, if necessary */
 	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS)
-		hwif->dma_start(drive);
+		hwif->dma_ops->dma_start(drive);
 #endif
 	/* Send the actual packet */
 	HWIF(drive)->atapi_output_bytes(drive, pc->c, 12);
@@ -1279,7 +1279,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
 		ide_dma_off(drive);
 	}
 	if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
-		dma_ok = !hwif->dma_setup(drive);
+		dma_ok = !hwif->dma_ops->dma_setup(drive);
 
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
 			   IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);