xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
派生 0
代码 工单 合并请求 工作流 软件包 项目 发布 百科 活动

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

浏览代码 
Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...
这个提交包含在：
Linus Torvalds
2015-04-22 09:09:46 -07:00
父节点 e6c81cce56 8b036556d6
当前提交 5c73cc4b6c
共修改 206 个文件，包含 19171 行新增和 2103 行删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

11
arch/arm/mach-davinci/Kconfig
查看文件

@@ -200,17 +200,6 @@ config DA850_UI_SD_VIDEO_PORT
endchoice
config DA850_WL12XX
bool "AM18x wl1271 daughter board"
depends on MACH_DAVINCI_DA850_EVM
help
The wl1271 daughter card for AM18x EVMs is a combo wireless
connectivity add-on card, based on the LS Research TiWi module with
Texas Instruments' wl1271 solution.
Say Y if you want to use a wl1271 expansion card connected to the
AM18x EVM.
config MACH_MITYOMAPL138
bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
depends on ARCH_DAVINCI_DA850

112
arch/arm/mach-davinci/board-da850-evm.c
查看文件

@@ -38,7 +38,6 @@
#include <linux/regulator/fixed.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/wl12xx.h>
#include <mach/common.h>
#include <mach/cp_intc.h>
@@ -60,9 +59,6 @@
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
#define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1343,109 +1339,6 @@ static __init void da850_vpif_init(void)
static __init void da850_vpif_init(void) {}
#endif
#ifdef CONFIG_DA850_WL12XX
static void wl12xx_set_power(int index, bool power_on)
{
static bool power_state;
pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
if (power_on == power_state)
return;
power_state = power_on;
if (power_on) {
/* Power up sequence required for wl127x devices */
gpio_set_value(DA850_WLAN_EN, 1);
usleep_range(15000, 15000);
gpio_set_value(DA850_WLAN_EN, 0);
usleep_range(1000, 1000);
gpio_set_value(DA850_WLAN_EN, 1);
msleep(70);
} else {
gpio_set_value(DA850_WLAN_EN, 0);
}
}
static struct davinci_mmc_config da850_wl12xx_mmc_config = {
.set_power = wl12xx_set_power,
.wires = 4,
.max_freq = 25000000,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_POWER_OFF_CARD,
};
static const short da850_wl12xx_pins[] __initconst = {
DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
DA850_GPIO6_9, DA850_GPIO6_10,
-1
};
static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
.irq = -1,
.board_ref_clock = WL12XX_REFCLOCK_38,
.platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
};
static __init int da850_wl12xx_init(void)
{
int ret;
ret = davinci_cfg_reg_list(da850_wl12xx_pins);
if (ret) {
pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
goto exit;
}
ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
if (ret) {
pr_err("wl12xx/mmc registration failed: %d\n", ret);
goto exit;
}
ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
if (ret) {
pr_err("Could not request wl12xx enable gpio: %d\n", ret);
goto exit;
}
ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
if (ret) {
pr_err("Could not request wl12xx irq gpio: %d\n", ret);
goto free_wlan_en;
}
da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
if (ret) {
pr_err("Could not set wl12xx data: %d\n", ret);
goto free_wlan_irq;
}
return 0;
free_wlan_irq:
gpio_free(DA850_WLAN_IRQ);
free_wlan_en:
gpio_free(DA850_WLAN_EN);
exit:
return ret;
}
#else /* CONFIG_DA850_WL12XX */
static __init int da850_wl12xx_init(void)
{
return 0;
}
#endif /* CONFIG_DA850_WL12XX */
#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
static __init void da850_evm_init(void)
@@ -1502,11 +1395,6 @@ static __init void da850_evm_init(void)
if (ret)
pr_warn("%s: MMCSD0 registration failed: %d\n",
__func__, ret);
ret = da850_wl12xx_init();
if (ret)
pr_warn("%s: WL12xx initialization failed: %d\n",
__func__, ret);
}
davinci_serial_init(da8xx_serial_device);