Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

drivers/bcma/Kconfig

@@ -11,14 +11,15 @@ menuconfig BCMA
 	  Bus driver for Broadcom specific Advanced Microcontroller Bus
 	  Architecture.
 
+if BCMA
+
 # Support for Block-I/O. SELECT this from the driver that needs it.
 config BCMA_BLOCKIO
 	bool
-	depends on BCMA
 
 config BCMA_HOST_PCI_POSSIBLE
 	bool
-	depends on BCMA && PCI = y
+	depends on PCI = y
 	default y
 
 config BCMA_HOST_PCI
@@ -29,7 +30,6 @@ config BCMA_HOST_PCI
 
 config BCMA_HOST_SOC
 	bool "Support for BCMA in a SoC"
-	depends on BCMA
 	help
 	  Host interface for a Broadcom AIX bus directly mapped into
 	  the memory. This only works with the Broadcom SoCs from the
@@ -39,7 +39,7 @@ config BCMA_HOST_SOC
 
 config BCMA_DRIVER_PCI
 	bool "BCMA Broadcom PCI core driver"
-	depends on BCMA && PCI
+	depends on PCI
 	default y
 	help
 	  BCMA bus may have many versions of PCIe core. This driver
@@ -55,13 +55,13 @@ config BCMA_DRIVER_PCI
 
 config BCMA_DRIVER_PCI_HOSTMODE
 	bool "Driver for PCI core working in hostmode"
-	depends on BCMA && MIPS && BCMA_DRIVER_PCI
+	depends on MIPS && BCMA_DRIVER_PCI
 	help
 	  PCI core hostmode operation (external PCI bus).
 
 config BCMA_DRIVER_MIPS
 	bool "BCMA Broadcom MIPS core driver"
-	depends on BCMA && MIPS
+	depends on MIPS
 	help
 	  Driver for the Broadcom MIPS core attached to Broadcom specific
 	  Advanced Microcontroller Bus.
@@ -92,7 +92,6 @@ config BCMA_NFLASH
 
 config BCMA_DRIVER_GMAC_CMN
 	bool "BCMA Broadcom GBIT MAC COMMON core driver"
-	depends on BCMA
 	help
 	  Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
 	  specific Advanced Microcontroller Bus.
@@ -101,7 +100,7 @@ config BCMA_DRIVER_GMAC_CMN
 
 config BCMA_DRIVER_GPIO
 	bool "BCMA GPIO driver"
-	depends on BCMA && GPIOLIB
+	depends on GPIOLIB
 	select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
 	help
 	  Driver to provide access to the GPIO pins of the bcma bus.
@@ -110,8 +109,9 @@ config BCMA_DRIVER_GPIO
 
 config BCMA_DEBUG
 	bool "BCMA debugging"
-	depends on BCMA
 	help
 	  This turns on additional debugging messages.
 
 	  If unsure, say N
+
+endif # BCMA

drivers/bcma/driver_mips.c

@@ -184,10 +184,14 @@ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
 {
 	int i;
 	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
-	printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
-	for (i = 0; i <= 6; i++)
-		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
-	printk("\n");
+	char interrupts[20];
+	char *ints = interrupts;
+
+	for (i = 0; i < ARRAY_SIZE(irq_name); i++)
+		ints += sprintf(ints, " %s%c",
+				irq_name[i], i == irq ? '*' : ' ');
+
+	bcma_debug(dev->bus, "core 0x%04x, irq:%s\n", dev->id.id, interrupts);
 }
 
 static void bcma_core_mips_dump_irq(struct bcma_bus *bus)