Merge tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB changes for v4.21

So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.

There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.

Apart from these, we have the usual set of non-critical fixes and new
features all over the place.

* tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits)
  usb: dwc2: Fix disable all EP's on disconnect
  usb: dwc3: gadget: Disable CSP for stream OUT ep
  usb: dwc2: disable power_down on Amlogic devices
  Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
  USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
  usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
  usb: dwc3: trace: add missing break statement to make compiler happy
  usb: dwc3: gadget: Report isoc transfer frame number
  usb: gadget: Introduce frame_number to usb_request
  usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
  usb: renesas_usbhs: Remove dummy runtime PM callbacks
  usb: dwc2: host: use hrtimer for NAK retries
  usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
  usb: mtu3: enable SETUPENDISR interrupt
  usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
  usb: mtu3: enable hardware remote wakeup from L1 automatically
  usb: mtu3: remove QMU checksum
  usb/mtu3: power down device ip at setup
  usb: dwc2: Disable power down feature on Samsung SoCs
  usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
  ...

drivers/usb/gadget/udc/aspeed-vhub/dev.c

@@ -438,7 +438,7 @@ static int ast_vhub_udc_stop(struct usb_gadget *gadget)
 	return 0;
 }
 
-static struct usb_gadget_ops ast_vhub_udc_ops = {
+static const struct usb_gadget_ops ast_vhub_udc_ops = {
 	.get_frame	= ast_vhub_udc_get_frame,
 	.wakeup		= ast_vhub_udc_wakeup,
 	.pullup		= ast_vhub_udc_pullup,

drivers/usb/gadget/udc/renesas_usb3.c

@@ -358,6 +358,7 @@ struct renesas_usb3 {
 	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
 	bool extcon_usb;		/* check vbus and set EXTCON_USB */
 	bool forced_b_device;
+	bool start_to_connect;
 };
 
 #define gadget_to_renesas_usb3(_gadget)	\
@@ -476,7 +477,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
 static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
 {
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
-	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
+	if (!usb3->workaround_for_vbus)
+		usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
 }
 
 static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3)
@@ -700,8 +702,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
 	usb3_set_mode_by_role_sw(usb3, host);
 	usb3_vbus_out(usb3, a_dev);
 	/* for A-Peripheral or forced B-device mode */
-	if ((!host && a_dev) ||
-	    (usb3->workaround_for_vbus && usb3->forced_b_device))
+	if ((!host && a_dev) || usb3->start_to_connect)
 		usb3_connect(usb3);
 	spin_unlock_irqrestore(&usb3->lock, flags);
 }
@@ -2432,7 +2433,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (!strncmp(buf, "1", 1))
+	usb3->start_to_connect = false;
+	if (usb3->workaround_for_vbus && usb3->forced_b_device &&
+	    !strncmp(buf, "2", 1))
+		usb3->start_to_connect = true;
+	else if (!strncmp(buf, "1", 1))
 		usb3->forced_b_device = true;
 	else
 		usb3->forced_b_device = false;
@@ -2440,7 +2445,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (usb3->workaround_for_vbus)
 		usb3_disconnect(usb3);
 
-	/* Let this driver call usb3_connect() anyway */
+	/* Let this driver call usb3_connect() if needed */
 	usb3_check_id(usb3);
 
 	return count;

drivers/usb/gadget/udc/s3c2410_udc.c

@@ -119,7 +119,7 @@ static void dprintk(int level, const char *fmt, ...)
 }
 #endif
 
-static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
+static int s3c2410_udc_debugfs_show(struct seq_file *m, void *p)
 {
 	u32 addr_reg, pwr_reg, ep_int_reg, usb_int_reg;
 	u32 ep_int_en_reg, usb_int_en_reg, ep0_csr;
@@ -168,20 +168,7 @@ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
 
 	return 0;
 }
-
-static int s3c2410_udc_debugfs_fops_open(struct inode *inode,
-					 struct file *file)
-{
-	return single_open(file, s3c2410_udc_debugfs_seq_show, NULL);
-}
-
-static const struct file_operations s3c2410_udc_debugfs_fops = {
-	.open		= s3c2410_udc_debugfs_fops_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
+DEFINE_SHOW_ATTRIBUTE(s3c2410_udc_debugfs);
 
 /* io macros */