Merge tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx into arm/drivers

arm64: zynqmp: SoC changes for v5.1

- Extend firmware interface with reset, nvmem,
  power management and power domain support

- Add reset, nvmem driver, power management and
  power domain drivers
-

* tag 'zynqmp-soc-for-v5.1' of https://github.com/Xilinx/linux-xlnx:
  drivers: soc: xilinx: Add ZynqMP power domain driver
  firmware: xilinx: Add APIs to control node status/power
  dt-bindings: power: Add ZynqMP power domain bindings
  drivers: soc: xilinx: Add ZynqMP PM driver
  firmware: xilinx: Implement ZynqMP power management APIs
  dt-bindings: soc: Add ZynqMP PM bindings
  nvmem: zynqmp: Added zynqmp nvmem firmware driver
  dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver
  firmware: xilinx: Add zynqmp_pm_get_chipid() API
  reset: reset-zynqmp: Adding support for Xilinx zynqmp reset controller.
  dt-bindings: reset: Add bindings for ZynqMP reset driver
  firmware: xilinx: Add reset API's

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt

@@ -0,0 +1,46 @@
+--------------------------------------------------------------------------
+=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
+--------------------------------------------------------------------------
+The nvmem_firmware node provides access to the hardware related data
+like soc revision, IDCODE... etc, By using the firmware interface.
+
+Required properties:
+- compatible: should be "xlnx,zynqmp-nvmem-fw"
+
+= Data cells =
+Are child nodes of silicon id, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+-------
+ Example
+-------
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		nvmem_firmware {
+			compatible = "xlnx,zynqmp-nvmem-fw";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Data cells */
+			soc_revision: soc_revision {
+				reg = <0x0 0x4>;
+			};
+		};
+	};
+};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+	pcap {
+		...
+
+		nvmem-cells = <&soc_revision>;
+		nvmem-cell-names = "soc_revision";
+
+		...
+	};

Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt

@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible:		Must contain:	"xlnx,zynqmp-power"
+ - interrupts:		Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_power: zynqmp-power {
+			compatible = "xlnx,zynqmp-power";
+			interrupts = <0 35 4>;
+		};
+	};
+};

Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt

@@ -0,0 +1,34 @@
+-----------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
+-----------------------------------------------------------
+The binding for zynqmp-power-controller follow the common
+generic PM domain binding[1].
+
+[1] Documentation/devicetree/bindings/power/power_domain.txt
+
+== Zynq MPSoC Generic PM Domain Node ==
+
+Required property:
+ - Below property should be in zynqmp-firmware node.
+ - #power-domain-cells:	Number of cells in a PM domain specifier. Must be 1.
+
+Power domain ID indexes are mentioned in
+include/dt-bindings/power/xlnx-zynqmp-power.h.
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		...
+		#power-domain-cells = <1>;
+		...
+	};
+};
+
+sata {
+	...
+	power-domains = <&zynqmp_firmware 28>;
+	...
+};

Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt

@@ -0,0 +1,52 @@
+--------------------------------------------------------------------------
+ =  Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible:	"xlnx,zynqmp-reset"
+- #reset-cells:	Specifies the number of cells needed to encode reset
+		line, should be 1
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_reset: reset-controller {
+			compatible = "xlnx,zynqmp-reset";
+			#reset-cells = <1>;
+		};
+	};
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+Example:
+
+serdes: zynqmp_phy@fd400000 {
+	...
+
+	resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+	reset-names = "sata_rst";
+
+	...
+};