Merge branch 'ti-sysc-fixes' into fixes

2019-08-13 03:40:10 -07:00
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -586,6 +586,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
 	imx7d-nitrogen7.dtb \
 	imx7d-pico-hobbit.dtb \
 	imx7d-pico-pi.dtb \
@@ -602,6 +603,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
+	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
@@ -748,6 +750,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
 	am335x-pocketbeagle.dtb \
+	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
@@ -975,6 +978,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
@@ -1268,10 +1272,16 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-swift.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * aks-cdu.dts - Device Tree file for AK signal CDU
 *
 * Copyright (C) 2012 AK signal Brno a.s.
 *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
@@ -33,6 +30,12 @@
 			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@@ -72,3 +75,9 @@
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
@@ -54,6 +51,12 @@
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@@ -114,3 +117,9 @@
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
@@ -63,6 +60,11 @@
 		>;
 	};

+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@@ -139,3 +141,9 @@

 	status = "okay";
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
 *
 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am335x-igep0033.dtsi"
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 / {
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include <dt-bindings/display/tda998x.h>
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 &ldo3_reg {
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
 * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;
 #include "am335x-chilisom.dtsi"
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
 * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 #include "am33xx.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
 *
 * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
 *
 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
 *
 * Author: SZ Lin (林上智) <sz.lin@moxa.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
 * Author: Wadim Egorov <w.egorov@phytec.de>
 *	   Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include <dt-bindings/input/input.h>
@@ -39,15 +36,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;

-		green {
-			label = "green:user";
+		user-led0 {
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
 			default-state = "on";
 		};

-		yellow {
-			label = "yellow:user";
+		user-led1 {
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "gpio";
 			default-state = "on";
@@ -138,22 +133,6 @@
 &davinci_mdio {
 	phy1: ethernet-phy@2 {
 		reg = <2>;
-
-		/* Register 260 (104h) – RGMII Clock and Control Pad Skew */
-		rxc-skew-ps = <1400>;
-		rxdv-skew-ps = <0>;
-		txc-skew-ps = <1400>;
-		txen-skew-ps = <0>;
-		/* Register 261 (105h) – RGMII RX Data Pad Skew */
-		rxd3-skew-ps = <0>;
-		rxd2-skew-ps = <0>;
-		rxd1-skew-ps = <0>;
-		rxd0-skew-ps = <0>;
-		/* Register 262 (106h) – RGMII TX Data Pad Skew */
-		txd3-skew-ps = <0>;
-		txd2-skew-ps = <0>;
-		txd1-skew-ps = <0>;
-		txd0-skew-ps = <0>;
 	};
 };

--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014 PHYTEC Messtechnik GmbH
 * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
@@ -13,6 +10,10 @@
 #include "am335x-pcm-953.dtsi"

 /* SoM */
+&gpmc {
+	status = "okay";
+};
+
 &i2c_eeprom {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Phytec Messtechnik GmbH
 * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am33xx.dtsi"
@@ -30,17 +27,13 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};

-	regulators {
-		compatible = "simple-bus";
-
-		vcc5v: fixedregulator0 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 };

@@ -53,6 +46,33 @@
 	status = "okay";
 };

+/* EMMC */
+&am33xx_pinmux {
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "disabled";
+};
+
 /* Ethernet */
 &am33xx_pinmux {
 	ethernet0_pins: pinmux_ethernet0 {
@@ -167,7 +187,7 @@
 };

 &gpmc {
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
--- a/arch/arm/boot/dts/am335x-regor-rdk.dts
+++ b/arch/arm/boot/dts/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-REGOR";
+	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	vcc3v3: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		run_stop-led {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		error-led {
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+};
+
+/* User Leds */
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+		>;
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_gpios_pins>;
+
+	user_gpios_pins: pinmux_user_gpios {
+		pinctrl-single,pins = <
+			/* DIGIN 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
+			/* DIGOUT 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_rs485_pins>;
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
+
+/* USB */
+&cppi41dma {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
 *
 * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am335x-cm-t335.dts"
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Phytec Messtechnik GmbH
 * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
@@ -13,6 +10,10 @@
 #include "am335x-wega.dtsi"

 /* SoM */
+&gpmc {
+	status = "okay";
+};
+
 &i2c_eeprom {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 Phytec Messtechnik GmbH
 * Author: Teresa Remmet <t.remmet@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 / {
@@ -15,16 +12,12 @@
 		compatible = "ti,da830-evm-audio";
 	};

-	regulators {
-		compatible = "simple-bus";
-
-		vcc3v3: fixedregulator1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 };

--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Device Tree Source for AM33xx clock data
 *
 * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 &scm_clocks {
 	sys_clkin_ck: sys_clkin_ck@40 {
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1758,6 +1758,8 @@

 		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@@ -1780,6 +1782,8 @@

 		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * See craneboard.org for more details
 *
 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include <dt-bindings/input/input.h>
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
 *
 * Based on am3517-evm.dts
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 / {
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Device Tree Source for OMAP3 clock data
 *
 * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 &scm_clocks {
 	emac_ick: emac_ick@32c {
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /* AM437x GP EVM */
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1574,6 +1574,8 @@

 		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@@ -1593,6 +1595,8 @@

 		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
--- a/arch/arm/boot/dts/am437x-sbc-t43.dts
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am437x-cm-t43.dts"
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /* AM437x SK EVM */
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /* AM43x EPOS EVM */
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Device Tree Source for AM43xx clock data
 *
 * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 &scm_clocks {
 	sys_clkin_ck: sys_clkin_ck@40 {
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 /dts-v1/;

@@ -382,7 +379,7 @@
 	};
 };

-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am57xx-beagle-x15-common.dtsi"
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am57xx-beagle-x15-common.dtsi"
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am57xx-beagle-x15-common.dtsi"
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Support for CompuLab CL-SOM-AM57x System-on-Module
 *
 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 #include "am57xx-industrial-grade.dtsi"
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * Support for CompuLab SBC-AM57x single board computer
 *
 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
 */

 #include "am57xx-cl-som-am57x.dts"
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
 *
 *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -119,6 +119,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	flash1@44000000 {
@@ -126,6 +129,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -120,12 +120,18 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x30000000 0x4000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	fpga_flash@38000000 {
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x38000000 0x800000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	/*
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -235,6 +235,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	flash1@44000000 {
@@ -242,6 +245,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	bridge {
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -134,6 +134,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x40000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	flash1@44000000 {
@@ -141,6 +144,9 @@
 		compatible = "arm,versatile-flash", "cfi-flash";
 		reg = <0x44000000 0x04000000>;
 		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
 	};

 	/* SMSC 9118 ethernet with PHY and EEPROM */
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -143,6 +143,20 @@
 		};
 	};

+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+				<&gpio1 26 GPIO_ACTIVE_HIGH>,
+				<&gpio1 27 GPIO_ACTIVE_HIGH>,
+				<&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&backup_button_pin
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -336,3 +336,11 @@
 	status = "disabled";
 };

+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -372,3 +372,11 @@
 &adc {
 	status = "okay";
 };
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * wdt2 is not used by Yamp.
+ */
+&wdt2 {
+	status = "disabled";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	no-hw-checksum;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,846 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+	    power {
+		    label = "power";
+		    /* TODO: dummy gpio */
+		    gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+	    };
+
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	power-supply@5a {
+		compatible = "pmbus";
+		reg = <0x5a>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_INIT_OK";
+	};
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin_gpio_h3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin_gpio_s4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin_gpio_y0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin_gpio_y1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin_gpio_z0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_z7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin_gpio_aa5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -322,3 +322,5 @@
 &adc {
 	status = "okay";
 };
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -347,3 +347,25 @@
 		line-name = "BMC_TPM_INT_N";
 	};
 };
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -42,6 +42,13 @@
 			compatible = "shared-dma-pool";
 			reusable;
 		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
 	};

 	leds {
@@ -304,3 +311,10 @@
 &adc {
 	status = "okay";
 };
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -0,0 +1,966 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Swift BMC";
+	compatible = "ibm,swift-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 7)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+
+		oppanel-presence {
+			label = "oppanel-presence";
+			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(A, 7)>;
+		};
+
+		opencapi-riser-presence {
+			label = "opencapi-riser-presence";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(I, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		scm0-presence {
+			label = "scm0-presence";
+			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		scm1-presence {
+			label = "scm1-presence";
+			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		cpu0vrm-presence {
+			label = "cpu0vrm-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		cpu1vrm-presence {
+			label = "cpu1vrm-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		fanboost-presence {
+			label = "fanboost-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fanboost {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	si7021a20@20 {
+		compatible = "si,si7021a20";
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca1: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"P9_SCM0_PRES",	"P9_SCM1_PRES",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca2: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca3: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c11 {
+	/* MUX
+	 *   -> PCIe Slot 0
+	 *   -> PCIe Slot 1
+	 *   -> PCIe Slot 2
+	 *   -> PCIe Slot 3
+	 */
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button_checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		button_identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+	no-hw-checksum;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -33,6 +33,13 @@
 			compatible = "shared-dma-pool";
 			reusable;
 		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
 	};

 	gpio-keys {
@@ -640,3 +647,10 @@
 &vhub {
 	status = "okay";
 };
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -7,6 +7,14 @@
 	model = "Zaius BMC";
 	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";

+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
 	chosen {
 		stdout-path = &uart5;
 		bootargs = "console=ttyS4,115200 earlyprintk";
@@ -223,6 +231,27 @@
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};

 	/* MUX1 PCA9546A @71h
@@ -253,6 +282,17 @@
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
 	};

 	/* MUX1 PCA9546A @71h
@@ -296,33 +336,98 @@
 				reg = <0x54>;
 			};
 		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
 	};

 	/* Master selector PCA9541A @70h (other master: CPU0)
 	 *   LM5066I PMBUS @10h
 	 */

-	/* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
-	power-brick@61 {
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
 		compatible = "delta,dps800";
-		reg = <0x61>;
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
 	};

 	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
 	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
 	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
-	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
 	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
 };

 &i2c8 {
 	status = "okay";

-	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
-	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
-	/* CPU1 VR ISL68137 0.8V PMBUS @61h */
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
 	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
-	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
 };


@@ -435,3 +540,5 @@
 &ibt {
 	status = "okay";
 };
+
+#include "ibm-power9-dual.dtsi"
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -112,6 +112,11 @@
 			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
 };

+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
 &ibt {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -53,7 +53,7 @@
 		#size-cells = <1>;
 		ranges;

-		fmc: flash-controller@1e620000 {
+		fmc: spi@1e620000 {
 			reg = < 0x1e620000 0x94
 				0x20000000 0x10000000 >;
 			#address-cells = <1>;
@@ -69,7 +69,7 @@
 			};
 		};

-		spi: flash-controller@1e630000 {
+		spi: spi@1e630000 {
 			reg = < 0x1e630000 0x18
 				0x30000000 0x10000000 >;
 			#address-cells = <1>;
@@ -165,6 +165,10 @@
 					compatible = "aspeed,g4-pinctrl";
 				};

+				p2a: p2a-control {
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
 			};

 			rng: hwrng@1e6e2078 {
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -60,7 +60,7 @@
 		#size-cells = <1>;
 		ranges;

-		fmc: flash-controller@1e620000 {
+		fmc: spi@1e620000 {
 			reg = < 0x1e620000 0xc4
 				0x20000000 0x10000000 >;
 			#address-cells = <1>;
@@ -86,7 +86,7 @@
 			};
 		};

-		spi1: flash-controller@1e630000 {
+		spi1: spi@1e630000 {
 			reg = < 0x1e630000 0xc4
 				0x30000000 0x08000000 >;
 			#address-cells = <1>;
@@ -106,7 +106,7 @@
 			};
 		};

-		spi2: flash-controller@1e631000 {
+		spi2: spi@1e631000 {
 			reg = < 0x1e631000 0xc4
 				0x38000000 0x08000000 >;
 			#address-cells = <1>;
@@ -219,6 +219,11 @@
 					aspeed,external-nodes = <&gfx &lhc>;

 				};
+
+				p2a: p2a-control {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					status = "disabled";
+				};
 			};

 			rng: hwrng@1e6e2078 {
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
 *
 * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
 *                    Robert Nelson <robertcnelson@gmail.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "at91sam9g25.dtsi"
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-cosino.dtsi - Device Tree file for Cosino core module
 *
@@ -7,8 +8,6 @@
 * Derived from at91sam9x5ek.dtsi by:
 *	Copyright (C) 2012 Atmel,
 *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
 */

 #include "at91sam9g35.dtsi"
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
 *			      Mega 2560 extension
@@ -8,8 +9,6 @@
 * Derived from at91sam9g35ek.dts by:
 * 	Copyright (C) 2012 Atmel,
 *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
 *
 * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
 *
 * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
 *
 * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
 *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
 *
 * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "sama5d31.dtsi"
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
 *
 * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "at91sam9g25.dtsi"
--- a/arch/arm/boot/dts/at91-linea.dtsi
+++ b/arch/arm/boot/dts/at91-linea.dtsi
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
 *
 * Copyright (C) 2017 Axentia Technologies AB
 *
 * Author: Peter Rosin <peda@axentia.se>
- *
- * Licensed under GPLv2 or later.
 */

 #include "sama5d31.dtsi"
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
 * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
 *
 * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
 */
 /dts-v1/;
 #include "at91sam9260.dtsi"
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
 *
 *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "at91sam9260.dtsi"
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
 *
 *  Copyright (C) 2014 Atmel,
 *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include "sama5d36.dtsi"
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
 */

 #include "sama5d4.dtsi"
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
 */

 /dts-v1/;
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
 *
 * Copyright (C) 2017 Axentia Technologies AB
 *
 * Author: Peter Rosin <peda@axentia.se>
- *
- * Licensed under GPLv2 or later.
 */
 /dts-v1/;
 #include <dt-bindings/pwm/pwm.h>
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -42,7 +42,7 @@
 	clock-frequency = <12000000>;
 };

-&slow_osc {
+&clk32k {
 	atmel,osc-bypass;
 };

--- a/显示更多
+++ b/显示更多