b43: move under broadcom vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/b43/Kconfig

@@ -0,0 +1,187 @@
+config B43
+	tristate "Broadcom 43xx wireless support (mac80211 stack)"
+	depends on (BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA
+	select BCMA if B43_BCMA
+	select SSB if B43_SSB
+	select FW_LOADER
+	---help---
+	  b43 is a driver for the Broadcom 43xx series wireless devices.
+
+	  Check "lspci" for something like
+	  "Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
+	  to determine whether you own such a device.
+
+	  This driver supports the new BCM43xx IEEE 802.11G devices, but not
+	  the old IEEE 802.11B devices. Old devices are supported by
+	  the b43legacy driver.
+	  Note that this has nothing to do with the standard that your AccessPoint
+	  supports (A, B, G or a combination).
+	  IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
+
+	  It is safe to include both b43 and b43legacy as the underlying glue
+	  layer will automatically load the correct version for your device.
+
+	  This driver uses V4 firmware, which must be installed separately using
+	  b43-fwcutter.
+
+	  This driver can be built as a module (recommended) that will be called "b43".
+	  If unsure, say M.
+
+config B43_BCMA
+	bool
+
+config B43_SSB
+	bool
+
+choice
+	prompt "Supported bus types"
+	depends on B43
+	default B43_BUSES_BCMA_AND_SSB
+
+config B43_BUSES_BCMA_AND_SSB
+	bool "BCMA and SSB"
+	depends on BCMA_POSSIBLE && SSB_POSSIBLE
+	select B43_BCMA
+	select B43_SSB
+
+config B43_BUSES_BCMA
+	bool "BCMA only"
+	depends on BCMA_POSSIBLE
+	select B43_BCMA
+
+config B43_BUSES_SSB
+	bool "SSB only"
+	depends on SSB_POSSIBLE
+	select B43_SSB
+
+endchoice
+
+# Auto-select SSB PCI-HOST support, if possible
+config B43_PCI_AUTOSELECT
+	bool
+	depends on B43 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	select SSB_B43_PCI_BRIDGE
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B43_PCICORE_AUTOSELECT
+	bool
+	depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B43_SDIO
+	bool "Broadcom 43xx SDIO device support"
+	depends on B43 && B43_SSB && SSB_SDIOHOST_POSSIBLE
+	select SSB_SDIOHOST
+	---help---
+	  Broadcom 43xx device support for Soft-MAC SDIO devices.
+
+	  With this config option you can drive Soft-MAC b43 cards with a
+	  Secure Digital I/O interface.
+	  This includes the WLAN daughter card found on the Nintendo Wii
+	  video game console.
+	  Note that this does not support Broadcom 43xx Full-MAC devices.
+
+	  It's safe to select Y here, even if you don't have a B43 SDIO device.
+
+	  If unsure, say N.
+
+#Data transfers to the device via PIO. We want it as a fallback even
+# if we can do DMA.
+config B43_BCMA_PIO
+	bool
+	depends on B43 && B43_BCMA
+	select BCMA_BLOCKIO
+	default y
+
+config B43_PIO
+	bool
+	depends on B43 && B43_SSB
+	select SSB_BLOCKIO
+	default y
+
+config B43_PHY_G
+	bool "Support for G-PHY (802.11g) devices"
+	depends on B43 && B43_SSB
+	default y
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4306, BCM4311, BCM4318
+	  SoC: BCM4712, BCM5352E
+
+config B43_PHY_N
+	bool "Support for N-PHY (the main 802.11n series) devices"
+	depends on B43
+	default y
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4321, BCM4322,
+	       BCM43222, BCM43224, BCM43225,
+	       BCM43131, BCM43217, BCM43227, BCM43228
+	  SoC: BCM4716, BCM4717, BCM4718, BCM5356, BCM5357, BCM5358
+
+config B43_PHY_LP
+	bool "Support for LP-PHY (low-power 802.11g) devices"
+	depends on B43 && B43_SSB
+	default y
+	---help---
+	  The LP-PHY is a low-power PHY built into some notebooks
+	  and embedded devices. It supports 802.11a/b/g
+	  (802.11a support is optional, and currently disabled).
+
+config B43_PHY_HT
+	bool "Support for HT-PHY (high throughput 802.11n) devices"
+	depends on B43 && B43_BCMA
+	default y
+	---help---
+	  This PHY type with 3x3:3 MIMO can be found in the BCM4331 PCI chipset.
+
+config B43_PHY_LCN
+	bool "Support for LCN-PHY devices (BROKEN)"
+	depends on B43 && BROKEN
+	---help---
+	  Support for the LCN-PHY.
+
+	  Say N, this is BROKEN and crashes driver.
+
+config B43_PHY_AC
+	bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
+	depends on B43 && B43_BCMA && BROKEN
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4352, BCM4360
+
+	  Say N, this is BROKEN and crashes driver.
+
+# This config option automatically enables b43 LEDS support,
+# if it's possible.
+config B43_LEDS
+	bool
+	depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
+	default y
+
+# This config option automatically enables b43 HW-RNG support,
+# if the HW-RNG core is enabled.
+config B43_HWRNG
+	bool
+	depends on B43 && (HW_RANDOM = y || HW_RANDOM = B43)
+	default y
+
+config B43_DEBUG
+	bool "Broadcom 43xx debugging"
+	depends on B43
+	---help---
+	  Broadcom 43xx debugging.
+
+	  This adds additional runtime sanity checks and statistics to the driver.
+	  These checks and statistics might be expensive and hurt the runtime
+	  performance of your system.
+	  This also adds the b43 debugfs interface.
+
+	  Do not enable this, unless you are debugging the driver.
+
+	  Say N, if you are a distributor or user building a release kernel
+	  for production use.
+	  Only say Y, if you are debugging a problem in the b43 driver sourcecode.