Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	"irq" and "wakeup" names are recognized by I2C core, other names are
 	left to individual drivers.
 
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
 
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
 Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
 interrupt for the device. If "wakeup" interrupt name is not present in the
 binding, then primary interrupt will be used as wakeup interrupt.

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values