xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Bifurcation 0
Code Tickets Demandes d'ajout Actions Paquets Projets Publications Wiki Activité

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Parcourir la source 
Conflicts:
	drivers/net/bonding/bond_alb.c
	drivers/net/ethernet/altera/altera_msgdma.c
	drivers/net/ethernet/altera/altera_sgdma.c
	net/ipv6/xfrm6_output.c

Several cases of overlapping changes.

The xfrm6_output.c has a bug fix which overlaps the renaming
of skb->local_df to skb->ignore_df.

In the Altera TSE driver cases, the register access cleanups
in net-next overlapped with bug fixes done in net.

Similarly a bug fix to send ALB packets in the bonding driver using
the right source address overlaps with cleanups in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cette révision appartient à :
David S. Miller
2014-05-24 00:32:30 -04:00
Parent be65de7174 1ee1ceafb5
révision 54e5c4def0
528 fichiers modifiés avec 6235 ajouts et 3741 suppressions
Télécharger le Fichier Patch Télécharger le Fichier des Différences Développer tous les fichiers Réduire tous les fichiers

2
arch/arm/boot/dts/am33xx.dtsi
Voir le fichier

@@ -144,7 +144,7 @@
compatible = "ti,edma3";
ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
reg = <0x49000000 0x10000>,
<0x44e10f90 0x10>;
<0x44e10f90 0x40>;
interrupts = <12 13 14>;
#dma-cells = <1>;
dma-channels = <64>;

16
arch/arm/boot/dts/am3517.dtsi
Voir le fichier

@@ -62,5 +62,21 @@
};
};
&iva {
status = "disabled";
};
&mailbox {
status = "disabled";
};
&mmu_isp {
status = "disabled";
};
&smartreflex_mpu_iva {
status = "disabled";
};
/include/ "am35xx-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"

5
arch/arm/boot/dts/am437x-gp-evm.dts
Voir le fichier

@@ -117,6 +117,11 @@
status = "okay";
};
&gpio5 {
status = "okay";
ti,no-reset-on-init;
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;

1
arch/arm/boot/dts/armada-370-db.dts
Voir le fichier

@@ -67,6 +67,7 @@
i2c@11000 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
compatible = "cirrus,cs42l51";

5
arch/arm/boot/dts/armada-375-db.dts
Voir le fichier

@@ -79,6 +79,11 @@
};
};
sata@a0000 {
status = "okay";
nr-ports = <2>;
};
nand: nand@d0000 {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";

2
arch/arm/boot/dts/armada-xp-db.dts
Voir le fichier

@@ -49,7 +49,7 @@
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;

10
arch/arm/boot/dts/armada-xp-gp.dts
Voir le fichier

@@ -59,7 +59,7 @@
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
@@ -146,22 +146,22 @@
ethernet@70000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
phy-mode = "qsgmii";
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
phy-mode = "qsgmii";
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "rgmii-id";
phy-mode = "qsgmii";
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "rgmii-id";
phy-mode = "qsgmii";
};
/* Front-side USB slot */

2
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
Voir le fichier

@@ -39,7 +39,7 @@
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <8>;
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;

4
arch/arm/boot/dts/at91-sama5d3_xplained.dts
Voir le fichier

@@ -34,7 +34,7 @@
};
spi0: spi@f0004000 {
cs-gpios = <&pioD 13 0>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
@@ -79,7 +79,7 @@
};
spi1: spi@f8008000 {
cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};

2
arch/arm/boot/dts/at91sam9261.dtsi
Voir le fichier

@@ -10,7 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9261 family SoC";

2
arch/arm/boot/dts/at91sam9rl.dtsi
Voir le fichier

@@ -8,7 +8,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>

2
arch/arm/boot/dts/imx53-mba53.dts
Voir le fichier

@@ -244,7 +244,7 @@
&tve {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vga_sync_1>;
i2c-ddc-bus = <&i2c3>;
ddc-i2c-bus = <&i2c3>;
fsl,tve-mode = "vga";
fsl,hsync-pin = <4>;
fsl,vsync-pin = <6>;

2
arch/arm/boot/dts/imx53.dtsi
Voir le fichier

@@ -115,7 +115,7 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
reg = <0x18000000 0x08000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
<&clks IMX5_CLK_IPU_DI0_GATE>,

18
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
Voir le fichier

@@ -30,6 +30,16 @@
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl@10000 {
pmx_usb_led: pmx-usb-led {
@@ -73,14 +83,6 @@
ehci@50000 {
status = "okay";
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {

18
arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
Voir le fichier

@@ -4,6 +4,16 @@
/ {
model = "ZyXEL NSA310";
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
@@ -26,14 +36,6 @@
status = "okay";
nr-ports = <2>;
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio_poweroff {

5
arch/arm/boot/dts/kirkwood-t5325.dts
Voir le fichier

@@ -127,11 +127,6 @@
i2c@11000 {
status = "okay";
alc5621: alc5621@1a {
compatible = "realtek,alc5621";
reg = <0x1a>;
};
};
serial@12000 {

19
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
Voir le fichier

@@ -24,11 +24,10 @@
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,cs-on-ns = <1>;
gpmc,cs-rd-off-ns = <180>;
gpmc,cs-wr-off-ns = <180>;
gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
@@ -36,12 +35,10 @@
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,access-ns = <144>;
gpmc,page-burst-access-ns = <24>;
gpmc,bus-turnaround-ns = <90>;
gpmc,cycle2cycle-delay-ns = <90>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;

7
arch/arm/boot/dts/omap2.dtsi
Voir le fichier

@@ -71,13 +71,6 @@
interrupts = <58>;
};
mailbox: mailbox@48094000 {
compatible = "ti,omap2-mailbox";
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
};
intc: interrupt-controller@1 {
compatible = "ti,omap2-intc";
interrupt-controller;

8
arch/arm/boot/dts/omap2420.dtsi
Voir le fichier

@@ -125,6 +125,14 @@
dma-names = "tx", "rx";
};
mailbox: mailbox@48094000 {
compatible = "ti,omap2-mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
};
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;

7
arch/arm/boot/dts/omap2430.dtsi
Voir le fichier

@@ -216,6 +216,13 @@
dma-names = "tx", "rx";
};
mailbox: mailbox@48094000 {
compatible = "ti,omap2-mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
ti,hwmods = "mailbox";
};
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;

66
arch/arm/boot/dts/omap3-cm-t3x30.dtsi
Voir le fichier

@@ -10,18 +10,6 @@
cpu0-supply = <&vcc>;
};
};
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a: regulator-vdd33a {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&omap3_pmx_core {
@@ -35,58 +23,34 @@
hsusb0_pins: pinmux_hsusb0_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
OMAP3_CORE1_IOPAD(0x21a4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data3 */
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data4 */
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data5 */
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data6 */
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
};
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet@5,0 {
smsc1: ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";
pinctrl-names = "default";
pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
gpmc,we-on-ns = <54>;
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};
};

2
arch/arm/boot/dts/omap3-igep.dtsi
Voir le fichier

@@ -107,7 +107,7 @@
>;
};
smsc911x_pins: pinmux_smsc911x_pins {
smsc9221_pins: pinmux_smsc9221_pins {
pinctrl-single,pins = <
0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;

4
arch/arm/boot/dts/omap3-igep0020.dts
Voir le fichier

@@ -10,7 +10,7 @@
*/
#include "omap3-igep.dtsi"
#include "omap-gpmc-smsc911x.dtsi"
#include "omap-gpmc-smsc9221.dtsi"
/ {
model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -248,7 +248,7 @@
ethernet@gpmc {
pinctrl-names = "default";
pinctrl-0 = <&smsc911x_pins>;
pinctrl-0 = <&smsc9221_pins>;
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

37
arch/arm/boot/dts/omap3-sb-t35.dtsi
Voir le fichier

@@ -2,20 +2,6 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
/ {
vddvario_sb_t35: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a_sb_t35: regulator-vdd33a-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
@@ -37,11 +23,10 @@
reg = <4 0 0xff>;
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,cs-on-ns = <1>;
gpmc,cs-rd-off-ns = <180>;
gpmc,cs-wr-off-ns = <180>;
gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
@@ -49,16 +34,14 @@
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,access-ns = <144>;
gpmc,page-burst-access-ns = <24>;
gpmc,bus-turnaround-ns = <90>;
gpmc,cycle2cycle-delay-ns = <90>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario_sb_t35>;
vdd33a-supply = <&vdd33a_sb_t35>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
};

13
arch/arm/boot/dts/omap3-sbc-t3517.dts
Voir le fichier

@@ -8,6 +8,19 @@
/ {
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
vddvario: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a: regulator-vdd33a-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&omap3_pmx_core {

2
arch/arm/boot/dts/omap3.dtsi
Voir le fichier

@@ -61,7 +61,7 @@
ti,hwmods = "mpu";
};
iva {
iva: iva {
compatible = "ti,iva2.2";
ti,hwmods = "iva";

7
arch/arm/boot/dts/omap5.dtsi
Voir le fichier

@@ -630,6 +630,13 @@
status = "disabled";
};
mailbox: mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
};
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;

2
arch/arm/boot/dts/sama5d3.dtsi
Voir le fichier

@@ -13,7 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel SAMA5D3 family SoC";

2
arch/arm/boot/dts/sama5d3_mci2.dtsi
Voir le fichier

@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
/ {
ahb {

2
arch/arm/boot/dts/sama5d3_tcb1.dtsi
Voir le fichier

@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
/ {
aliases {

2
arch/arm/boot/dts/sama5d3_uart.dtsi
Voir le fichier

@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/clock/at91.h>
/ {
aliases {

1
arch/arm/boot/dts/ste-ccu8540.dts
Voir le fichier

@@ -18,6 +18,7 @@
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
memory@0 {
device_type = "memory";
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
};

14
arch/arm/boot/dts/sun7i-a20.dtsi
Voir le fichier

@@ -87,7 +87,7 @@
pll4: clk@01c20018 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-pll1-clk";
compatible = "allwinner,sun7i-a20-pll4-clk";
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll4";
@@ -109,6 +109,14 @@
clock-output-names = "pll6_sata", "pll6_other", "pll6";
};
pll8: clk@01c20040 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-pll4-clk";
reg = <0x01c20040 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll8";
};
cpu: cpu@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
@@ -805,9 +813,9 @@
status = "disabled";
};
i2c4: i2c@01c2bc00 {
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2bc00 0x400>;
reg = <0x01c2c000 0x400>;
interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;