Merge branch 'linus' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

arch/riscv/include/asm/fixmap.h

@@ -26,7 +26,7 @@ enum fixed_addresses {
 };
 
 #define FIXADDR_SIZE		(__end_of_fixed_addresses * PAGE_SIZE)
-#define FIXADDR_TOP		(PAGE_OFFSET)
+#define FIXADDR_TOP		(VMALLOC_START)
 #define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
 
 #define FIXMAP_PAGE_IO		PAGE_KERNEL

arch/riscv/include/asm/syscall.h

@@ -72,32 +72,20 @@ static inline void syscall_set_return_value(struct task_struct *task,
 
 static inline void syscall_get_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
-	BUG_ON(i + n > 6);
-	if (i == 0) {
-		args[0] = regs->orig_a0;
-		args++;
-		i++;
-		n--;
-	}
-	memcpy(args, &regs->a1 + i * sizeof(regs->a1), n * sizeof(args[0]));
+	args[0] = regs->orig_a0;
+	args++;
+	memcpy(args, &regs->a1, 5 * sizeof(args[0]));
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
-	BUG_ON(i + n > 6);
-        if (i == 0) {
-                regs->orig_a0 = args[0];
-                args++;
-                i++;
-                n--;
-        }
-	memcpy(&regs->a1 + i * sizeof(regs->a1), args, n * sizeof(regs->a0));
+	regs->orig_a0 = args[0];
+	args++;
+	memcpy(&regs->a1, args, 5 * sizeof(regs->a1));
 }
 
 static inline int syscall_get_arch(void)

arch/riscv/include/asm/uaccess.h

@@ -300,7 +300,7 @@ do {								\
 		"	.balign 4\n"				\
 		"4:\n"						\
 		"	li %0, %6\n"				\
-		"	jump 2b, %1\n"				\
+		"	jump 3b, %1\n"				\
 		"	.previous\n"				\
 		"	.section __ex_table,\"a\"\n"		\
 		"	.balign " RISCV_SZPTR "\n"			\

arch/riscv/kernel/Makefile

@@ -4,7 +4,6 @@
 
 ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
-CFLAGS_REMOVE_setup.o = -pg
 endif
 
 extra-y += head.o
@@ -29,8 +28,6 @@ obj-y	+= vdso.o
 obj-y	+= cacheinfo.o
 obj-y	+= vdso/
 
-CFLAGS_setup.o := -mcmodel=medany
-
 obj-$(CONFIG_FPU)		+= fpu.o
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o

arch/riscv/kernel/module.c

@@ -141,7 +141,7 @@ static int apply_r_riscv_hi20_rela(struct module *me, u32 *location,
 {
 	s32 hi20;
 
-	if (IS_ENABLED(CMODEL_MEDLOW)) {
+	if (IS_ENABLED(CONFIG_CMODEL_MEDLOW)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
 		  me->name, (long long)v, location);

arch/riscv/kernel/setup.c

@@ -48,14 +48,6 @@ struct screen_info screen_info = {
 };
 #endif
 
-unsigned long va_pa_offset;
-EXPORT_SYMBOL(va_pa_offset);
-unsigned long pfn_base;
-EXPORT_SYMBOL(pfn_base);
-
-unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
-EXPORT_SYMBOL(empty_zero_page);
-
 /* The lucky hart to first increment this variable will boot the other cores */
 atomic_t hart_lottery;
 unsigned long boot_cpu_hartid;

arch/riscv/mm/Makefile

@@ -1,3 +1,9 @@
+
+CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_FTRACE
+CFLAGS_REMOVE_init.o = -pg
+endif
+
 obj-y += init.o
 obj-y += fault.o
 obj-y += extable.o

arch/riscv/mm/init.c

@@ -25,6 +25,10 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 
+unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
+							__page_aligned_bss;
+EXPORT_SYMBOL(empty_zero_page);
+
 static void __init zone_sizes_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES] = { 0, };
@@ -143,6 +147,11 @@ void __init setup_bootmem(void)
 	}
 }
 
+unsigned long va_pa_offset;
+EXPORT_SYMBOL(va_pa_offset);
+unsigned long pfn_base;
+EXPORT_SYMBOL(pfn_base);
+
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
 pgd_t trampoline_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
 
@@ -172,6 +181,25 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 	}
 }
 
+/*
+ * setup_vm() is called from head.S with MMU-off.
+ *
+ * Following requirements should be honoured for setup_vm() to work
+ * correctly:
+ * 1) It should use PC-relative addressing for accessing kernel symbols.
+ *    To achieve this we always use GCC cmodel=medany.
+ * 2) The compiler instrumentation for FTRACE will not work for setup_vm()
+ *    so disable compiler instrumentation when FTRACE is enabled.
+ *
+ * Currently, the above requirements are honoured by using custom CFLAGS
+ * for init.o in mm/Makefile.
+ */
+
+#ifndef __riscv_cmodel_medany
+#error "setup_vm() is called from head.S before relocate so it should "
+	"not use absolute addressing."
+#endif
+
 asmlinkage void __init setup_vm(void)
 {
 	extern char _start;