Merge tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the "big" tty and serial driver patches for 5.5-rc1.
It's a bit later in the merge window than normal as I wanted to make
sure some last-minute patches applied to it were all sane. They seem
to be :)
There's a lot of little stuff in here, for the tty core, and for lots
of serial drivers:
- reverts of uartlite serial driver patches that were wrong
- msm-serial driver fixes
- serial core updates and fixes
- tty core fixes
- serial driver dma mapping api changes
- lots of other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
vcs: prevent write access to vcsu devices
tty: vt: keyboard: reject invalid keycodes
tty: don't crash in tty_init_dev when missing tty_port
serial: stm32: fix clearing interrupt error flags
tty: Fix Kconfig indentation, continued
serial: serial_core: Perform NULL checks for break_ctl ops
tty: remove unused argument from tty_open_by_driver()
tty: Fix Kconfig indentation
{tty: serial, nand: onenand}: samsung: rename to fix build warning
serial: ifx6x60: add missed pm_runtime_disable
serial: pl011: Fix DMA ->flush_buffer()
Revert "serial-uartlite: Move the uart register"
Revert "serial-uartlite: Add get serial id if not provided"
Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
Revert "serial-uartlite: Add runtime support"
Revert "serial-uartlite: Change logic how console_port is setup"
Revert "serial-uartlite: Use allocated structure instead of static ones"
tty: serial: msm_serial: Use dma_request_chan() directly for channel request
tty: serial: tegra: Use dma_request_chan() directly for channel request
...
Šī revīzija ir iekļauta:
Linus Torvalds
@@ -6,10 +6,19 @@ Description: Configures which IO port the host side of the UART
|
||||
Users: OpenBMC. Proposed changes should be mailed to
|
||||
openbmc@lists.ozlabs.org
|
||||
|
||||
What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
|
||||
What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq
|
||||
Date: April 2017
|
||||
Contact: Jeremy Kerr <jk@ozlabs.org>
|
||||
Description: Configures which interrupt number the host side of
|
||||
the UART will appear on the host <-> BMC LPC bus.
|
||||
Users: OpenBMC. Proposed changes should be mailed to
|
||||
openbmc@lists.ozlabs.org
|
||||
|
||||
What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
|
||||
Date: July 2019
|
||||
Contact: Oskar Senft <osk@google.com>
|
||||
Description: Configures the polarity of the serial interrupt to the
|
||||
host via the BMC LPC bus.
|
||||
Set to 0 for active-low or 1 for active-high.
|
||||
Users: OpenBMC. Proposed changes should be mailed to
|
||||
openbmc@lists.ozlabs.org
|
||||
|
||||
@@ -1097,7 +1097,7 @@
|
||||
mapped with the correct attributes.
|
||||
|
||||
linflex,<addr>
|
||||
Use early console provided by Freescale LinFlex UART
|
||||
Use early console provided by Freescale LINFlexD UART
|
||||
serial driver for NXP S32V234 SoCs. A valid base
|
||||
address must be provided, and the serial port must
|
||||
already be setup and configured.
|
||||
|
||||
@@ -56,6 +56,11 @@ Optional properties:
|
||||
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
|
||||
line respectively. It will use specified GPIO instead of the peripheral
|
||||
function pin for the UART feature. If unsure, don't specify this property.
|
||||
- aspeed,sirq-polarity-sense: Only applicable to aspeed,ast2500-vuart.
|
||||
phandle to aspeed,ast2500-scu compatible syscon alongside register offset
|
||||
and bit number to identify how the SIRQ polarity should be configured.
|
||||
One possible data source is the LPC/eSPI mode bit.
|
||||
Example: aspeed,sirq-polarity-sense = <&syscon 0x70 25>
|
||||
|
||||
Note:
|
||||
* fsl,ns16550:
|
||||
|
||||
@@ -21,8 +21,7 @@ Required properties:
|
||||
Optional properties:
|
||||
- dmas: A list of two dma specifiers, one for each entry in dma-names.
|
||||
- dma-names: should contain "tx" and "rx".
|
||||
- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
|
||||
linux,rs485-enabled-at-boot-time: see rs485.txt
|
||||
- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt
|
||||
|
||||
Note: Optional properties for DMA support. Write them both or both not.
|
||||
|
||||
|
||||
@@ -54,8 +54,10 @@ Required properties:
|
||||
- "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
|
||||
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
|
||||
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART.
|
||||
- "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART.
|
||||
- "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
|
||||
- "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
|
||||
- "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
|
||||
|
||||
@@ -81,7 +81,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
|
||||
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
|
||||
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
|
||||
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
|
||||
SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
|
||||
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
|
||||
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
|
||||
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
|
||||
|
||||
@@ -87,7 +87,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
|
||||
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
|
||||
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
|
||||
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
|
||||
SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
|
||||
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
|
||||
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
|
||||
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
|
||||
|
||||
@@ -70,7 +70,6 @@ FF_MAGIC 0x4646 fc_info ``drivers/net/ip
|
||||
ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
|
||||
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
|
||||
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
|
||||
SERIAL_MAGIC 0x5301 async_struct ``include/linux/serial.h``
|
||||
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
|
||||
SLIP_MAGIC 0x5302 slip ``drivers/net/slip.h``
|
||||
STRIP_MAGIC 0x5303 strip ``drivers/net/strip.c``
|
||||
|
||||
Atsaukties uz šo jaunā problēmā
Block a user