Merge tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic driver updates for v4.9, 2nd round" from Kevin Hilman:

- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates

* tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (21 commits)
  clk: gxbb: expose i2c clocks
  clk: gxbb: expose USB clocks
  clk: gxbb: expose spifc clock
  clk: gxbb: expose MPLL2 clock for use by DT
  Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
  usb: dwc2: add support for Meson8b and GXBB SoCs
  net: stmmac: update the module description of the dwmac-meson driver
  net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
  stmmac: introduce get_stmmac_bsp_priv() helper
  net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
  clk: meson-gxbb: Export PWM related clocks for DT
  meson: clk: Add support for clock gates
  gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b
  clk: meson: Copy meson8b CLKID defines to private header file
  meson: clk: Rename register names according to Amlogic datasheet
  meson: clk: Move register definitions to meson8b.h
  clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  media: rc: meson-ir: Add support for newer versions of the IR decoder
  ...

drivers/usb/dwc2/platform.c

@@ -181,6 +181,38 @@ static const struct dwc2_core_params params_ltq = {
 	.hibernation			= -1,
 };
 
+static const struct dwc2_core_params params_amlogic = {
+	.otg_cap			= DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE,
+	.otg_ver			= -1,
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.dma_desc_fs_enable		= 0,
+	.speed				= DWC2_SPEED_PARAM_HIGH,
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 500,
+	.host_perio_tx_fifo_size	= 500,
+	.max_transfer_size		= -1,
+	.max_packet_count		= -1,
+	.host_channels			= 16,
+	.phy_type			= DWC2_PHY_TYPE_PARAM_UTMI,
+	.phy_utmi_width			= -1,
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= 1,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR8 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+	.external_id_pin_ctl		= -1,
+	.hibernation			= -1,
+};
+
 /*
  * Check the dr_mode against the module configuration and hardware
  * capabilities.
@@ -464,6 +496,8 @@ static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+	{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
+	{ .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);