Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...

Documentation/devicetree/bindings/mfd/as3722.txt

@@ -20,6 +20,8 @@ Optional properties:
 - ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on
 	i2c scl/sda pins. Missing this will disable internal pullup on i2c
 	scl/sda lines.
+- ams,enable-ac-ok-power-on: Boolean property, to enable exit out of power off
+	mode with AC_OK pin (pin enabled in power off mode).
 
 Optional submodule and their properties:
 =======================================

Documentation/devicetree/bindings/mfd/axp20x.txt

@@ -44,8 +44,11 @@ Optional properties:
 			  board is driving OTG VBus or not.
 			  (axp221 / axp223 / axp803/ axp813 only)
 
-- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
-			wired for master mode. The default is slave mode.
+- x-powers,self-working-mode and
+  x-powers,master-mode: Boolean (axp806 only). Set either of these when the
+			PMIC is wired for self-working mode or master mode.
+			If neither is set then slave mode is assumed.
+			This corresponds to how the MODESET pin is wired.
 
 - <input>-supply: a phandle to the regulator supply node. May be omitted if
 		  inputs are unregulated, such as using the IPSOUT output

Documentation/devicetree/bindings/mfd/madera.txt

@@ -0,0 +1,102 @@
+Cirrus Logic Madera class audio codecs Multi-Functional Device
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+See also the child driver bindings in:
+bindings/pinctrl/cirrus,madera-pinctrl.txt
+bindings/regulator/arizona-regulator.txt
+bindings/sound/madera.txt
+
+Required properties:
+
+  - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l35"
+        "cirrus,cs47l85"
+        "cirrus,cs47l90"
+        "cirrus,cs47l91"
+        "cirrus,wm1840"
+
+  - reg : I2C slave address when connected using I2C, chip select number when
+    using SPI.
+
+  - DCVDD-supply : Power supply for the device as defined in
+    bindings/regulator/regulator.txt
+    Mandatory on CS47L35, CS47L90, CS47L91
+    Optional on CS47L85, WM1840
+
+  - AVDD-supply, DBVDD1-supply, DBVDD2-supply, CPVDD1-supply, CPVDD2-supply :
+    Power supplies for the device
+
+  - DBVDD3-supply, DBVDD4-supply : Power supplies for the device
+    (CS47L85, CS47L90, CS47L91, WM1840)
+
+  - SPKVDDL-supply, SPKVDDR-supply : Power supplies for the device
+    (CS47L85, WM1840)
+
+  - SPKVDD-supply : Power supply for the device
+    (CS47L35)
+
+  - interrupt-controller : Indicates that this device is an interrupt controller
+
+  - #interrupt-cells: the number of cells to describe an IRQ, must be 2.
+    The first cell is the IRQ number.
+    The second cell is the flags, encoded as the trigger masks from
+    bindings/interrupt-controller/interrupts.txt
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+
+  - #gpio-cells : Must be 2. The first cell is the pin number. The second cell
+    is reserved for future use and must be zero
+
+  - interrupt-parent : The parent interrupt controller.
+
+  - interrupts : The interrupt line the /IRQ signal for the device is
+    connected to.
+
+Optional properties:
+
+  - MICVDD-supply : Power supply, only need to be specified if
+    powered externally
+
+  - reset-gpios : One entry specifying the GPIO controlling /RESET.
+    As defined in bindings/gpio.txt.
+    Although optional, it is strongly recommended to use a hardware reset
+
+  - MICBIASx : Initial data for the MICBIAS regulators, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+    One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
+    (all codecs)
+
+    One for each output pin (MICBIAS1A, MIBCIAS1B, MICBIAS2A, ...)
+    (all except CS47L85, WM1840)
+
+    The following following additional property is supported for the generator
+    nodes:
+      - cirrus,ext-cap : Set to 1 if the MICBIAS has external decoupling
+        capacitors attached.
+
+Optional child nodes:
+    micvdd : Node containing initialization data for the micvdd regulator
+    See bindings/regulator/arizona-regulator.txt
+
+    ldo1 : Node containing initialization data for the LDO1 regulator
+    See bindings/regulator/arizona-regulator.txt
+    (cs47l85, wm1840)
+
+Example:
+
+cs47l85@0 {
+	compatible = "cirrus,cs47l85";
+	reg = <0>;
+
+	reset-gpios = <&gpio 0>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	interrupts = <&host_irq1>;
+	interrupt-parent = <&gic>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};

Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.txt

@@ -0,0 +1,62 @@
+* ROHM BD71837 Power Management Integrated Circuit bindings
+
+BD71837MWV is a programmable Power Management IC for powering single-core,
+dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is optimized for
+low BOM cost and compact solution footprint. It integrates 8 Buck
+egulators and 7 LDOs to provide all the power rails required by the SoC and
+the commonly used peripherals.
+
+Datasheet for PMIC is available at:
+https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
+
+Required properties:
+ - compatible		: Should be "rohm,bd71837".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to the parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - clocks		: The parent clock connected to PMIC. If this is missing
+			  32768 KHz clock is assumed.
+ - #clock-cells		: Should be 0.
+ - regulators:		: List of child nodes that specify the regulators.
+			  Please see ../regulator/rohm,bd71837-regulator.txt
+
+Optional properties:
+- clock-output-names	: Should contain name for output clock.
+
+Example:
+
+	/* external oscillator node */
+	osc: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <1>;
+		clock-frequency  = <32768>;
+		clock-output-names = "osc";
+	};
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <29 GPIO_ACTIVE_LOW>;
+		interrupt-names = "irq";
+		#clock-cells = <0>;
+		clocks = <&osc 0>;
+		clock-output-names = "bd71837-32k-out";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+			};
+		};
+	};
+
+	/* Clock consumer node */
+	rtc@0 {
+		compatible = "company,my-rtc";
+		clock-names = "my-clock";
+		clocks = <&pmic>;
+	};

Documentation/devicetree/bindings/mfd/tps65910.txt

@@ -22,7 +22,7 @@ Required properties:
   The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
             vaux2, vaux33, vmmc, vbb
-  tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+  tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
             ldo6, ldo7, ldo8
 
 - xxx-supply: Input voltage supply regulator.