powerpc/85xx/86xx: some refactoring for fsl_uli1575 code

- Get rid of uses_fsl_uli_m1575, it does not scale for all cases.
  Instead, let's explicitly use machine_is() for each fixup.
- Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with
  machine_is(). One step closer to multiplatform kernels.
- Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied.
- RTC quirk applies to all boards though, so no machine_is() checks.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Anton Vorontsov
2008-06-12 03:04:17 +04:00
committed by Kumar Gala
父節點 00c5372d37
當前提交 52ddd1cdc9
共有 5 個文件被更改,包括 108 次插入99 次删除

查看文件

@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
ULI_8259_NONE, /* PIRQH */
};
/* set in board code if you want this quirks to do something */
int uses_fsl_uli_m1575;
/* Bridge */
static void __devinit early_uli5249(struct pci_dev *dev)
{
unsigned char temp;
if (!uses_fsl_uli_m1575)
if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
!machine_is(mpc8572_ds))
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
{
int i;
if (!uses_fsl_uli_m1575)
if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
!machine_is(mpc8572_ds))
return;
/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
* IRQ 14: Edge
* IRQ 15: Edge
*/
if (!uses_fsl_uli_m1575)
if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
!machine_is(mpc8572_ds))
return;
outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
unsigned char c;
unsigned int d;
if (!uses_fsl_uli_m1575)
if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
!machine_is(mpc8572_ds))
return;
/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
{
unsigned short temp;
if (!uses_fsl_uli_m1575)
if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
!machine_is(mpc8572_ds))
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
{
u32 temp32;
if (!machine_is(mpc86xx_hpcd))
return;
/* Disable INTx */
pci_read_config_dword(dev, 0x48, &temp32);
pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
/* Enable sideband interrupt */
pci_read_config_dword(dev, 0x90, &temp32);
pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
}
static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
{
unsigned char c;
unsigned short temp;
if (!machine_is(mpc86xx_hpcd))
return;
/* Interrupt Disable, Needed when SATA disabled */
pci_read_config_word(dev, PCI_COMMAND, &temp);
temp |= 1<<10;
pci_write_config_word(dev, PCI_COMMAND, temp);
pci_read_config_byte(dev, 0x83, &c);
c |= 0x80;
pci_write_config_byte(dev, 0x83, c);
pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
pci_read_config_byte(dev, 0x83, &c);
c &= 0x7f;
pci_write_config_byte(dev, 0x83, c);
}
/*
* Since 8259PIC was disabled on the board, the IDE device can not
* use the legacy IRQ, we need to let the IDE device work under
* native mode and use the interrupt line like other PCI devices.
* IRQ14 is a sideband interrupt from IDE device to CPU and we use this
* as the interrupt for IDE device.
*/
static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
{
unsigned char c;
if (!machine_is(mpc86xx_hpcd))
return;
pci_read_config_byte(dev, 0x4b, &c);
c |= 0x10;
pci_write_config_byte(dev, 0x4b, c);
}
/*
* SATA interrupt pin bug fix
* There's a chip bug for 5288, The interrupt pin should be 2,
* not the read only value 1, So it use INTB#, not INTA# which
* actually used by the IDE device 5229.
* As of this bug, during the PCI initialization, 5288 read the
* irq of IDE device from the device tree, this function fix this
* bug by re-assigning a correct irq to 5288.
*
*/
static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
{
struct pci_controller *hose = pci_bus_to_host(dev->bus);
struct device_node *hosenode = hose ? hose->dn : NULL;
struct of_irq oirq;
int virq, pin = 2;
u32 laddr[3];
if (!machine_is(mpc86xx_hpcd))
return;
if (!hosenode)
return;
laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
laddr[1] = laddr[2] = 0;
of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
dev->irq = virq;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{