Merge branch 'rotary-encoder' into next

Bring in updates to roraty encoder driver switching it away from legacy
platform data and over to generic device properties and adding support
for encoders using more than 2 GPIOs.

drivers/input/joystick/db9.c

@@ -592,6 +592,7 @@ static void db9_attach(struct parport *pp)
 		return;
 	}
 
+	memset(&db9_parport_cb, 0, sizeof(db9_parport_cb));
 	db9_parport_cb.flags = PARPORT_FLAG_EXCL;
 
 	pd = parport_register_dev_model(pp, "db9", &db9_parport_cb, port_idx);

drivers/input/joystick/gamecon.c

@@ -951,6 +951,7 @@ static void gc_attach(struct parport *pp)
 	pads = gc_cfg[port_idx].args + 1;
 	n_pads = gc_cfg[port_idx].nargs - 1;
 
+	memset(&gc_parport_cb, 0, sizeof(gc_parport_cb));
 	gc_parport_cb.flags = PARPORT_FLAG_EXCL;
 
 	pd = parport_register_dev_model(pp, "gamecon", &gc_parport_cb,

drivers/input/joystick/turbografx.c

@@ -181,6 +181,7 @@ static void tgfx_attach(struct parport *pp)
 	n_buttons = tgfx_cfg[port_idx].args + 1;
 	n_devs = tgfx_cfg[port_idx].nargs - 1;
 
+	memset(&tgfx_parport_cb, 0, sizeof(tgfx_parport_cb));
 	tgfx_parport_cb.flags = PARPORT_FLAG_EXCL;
 
 	pd = parport_register_dev_model(pp, "turbografx", &tgfx_parport_cb,

drivers/input/joystick/walkera0701.c

@@ -218,6 +218,7 @@ static void walkera0701_attach(struct parport *pp)
 
 	w->parport = pp;
 
+	memset(&walkera0701_parport_cb, 0, sizeof(walkera0701_parport_cb));
 	walkera0701_parport_cb.flags = PARPORT_FLAG_EXCL;
 	walkera0701_parport_cb.irq_func = walkera0701_irq_handler;
 	walkera0701_parport_cb.private = w;

drivers/input/misc/arizona-haptics.c

@@ -97,8 +97,7 @@ static void arizona_haptics_work(struct work_struct *work)
 
 		ret = regmap_update_bits(arizona->regmap,
 					 ARIZONA_HAPTICS_CONTROL_1,
-					 ARIZONA_HAP_CTRL_MASK,
-					 1 << ARIZONA_HAP_CTRL_SHIFT);
+					 ARIZONA_HAP_CTRL_MASK, 0);
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to stop haptics: %d\n",
 				ret);

drivers/input/misc/rotary_encoder.c

@@ -20,70 +20,78 @@
 #include <linux/input.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/rotary_encoder.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 
 #define DRV_NAME "rotary-encoder"
 
 struct rotary_encoder {
 	struct input_dev *input;
-	const struct rotary_encoder_platform_data *pdata;
 
-	unsigned int axis;
+	struct mutex access_mutex;
+
+	u32 steps;
+	u32 axis;
+	bool relative_axis;
+	bool rollover;
+
 	unsigned int pos;
 
-	unsigned int irq_a;
-	unsigned int irq_b;
+	struct gpio_descs *gpios;
+
+	unsigned int *irq;
 
 	bool armed;
-	unsigned char dir;	/* 0 - clockwise, 1 - CCW */
+	signed char dir;	/* 1 - clockwise, -1 - CCW */
 
-	char last_stable;
+	unsigned last_stable;
 };
 
-static int rotary_encoder_get_state(const struct rotary_encoder_platform_data *pdata)
+static unsigned rotary_encoder_get_state(struct rotary_encoder *encoder)
 {
-	int a = !!gpio_get_value(pdata->gpio_a);
-	int b = !!gpio_get_value(pdata->gpio_b);
+	int i;
+	unsigned ret = 0;
 
-	a ^= pdata->inverted_a;
-	b ^= pdata->inverted_b;
+	for (i = 0; i < encoder->gpios->ndescs; ++i) {
+		int val = gpiod_get_value_cansleep(encoder->gpios->desc[i]);
+		/* convert from gray encoding to normal */
+		if (ret & 1)
+			val = !val;
 
-	return ((a << 1) | b);
+		ret = ret << 1 | val;
+	}
+
+	return ret & 3;
 }
 
 static void rotary_encoder_report_event(struct rotary_encoder *encoder)
 {
-	const struct rotary_encoder_platform_data *pdata = encoder->pdata;
-
-	if (pdata->relative_axis) {
+	if (encoder->relative_axis) {
 		input_report_rel(encoder->input,
-				 pdata->axis, encoder->dir ? -1 : 1);
+				 encoder->axis, encoder->dir);
 	} else {
 		unsigned int pos = encoder->pos;
 
-		if (encoder->dir) {
+		if (encoder->dir < 0) {
 			/* turning counter-clockwise */
-			if (pdata->rollover)
-				pos += pdata->steps;
+			if (encoder->rollover)
+				pos += encoder->steps;
 			if (pos)
 				pos--;
 		} else {
 			/* turning clockwise */
-			if (pdata->rollover || pos < pdata->steps)
+			if (encoder->rollover || pos < encoder->steps)
 				pos++;
 		}
 
-		if (pdata->rollover)
-			pos %= pdata->steps;
+		if (encoder->rollover)
+			pos %= encoder->steps;
 
 		encoder->pos = pos;
-		input_report_abs(encoder->input, pdata->axis, encoder->pos);
+		input_report_abs(encoder->input, encoder->axis, encoder->pos);
 	}
 
 	input_sync(encoder->input);
@@ -92,9 +100,11 @@ static void rotary_encoder_report_event(struct rotary_encoder *encoder)
 static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
 {
 	struct rotary_encoder *encoder = dev_id;
-	int state;
+	unsigned state;
 
-	state = rotary_encoder_get_state(encoder->pdata);
+	mutex_lock(&encoder->access_mutex);
+
+	state = rotary_encoder_get_state(encoder);
 
 	switch (state) {
 	case 0x0:
@@ -105,334 +115,227 @@ static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
 		break;
 
 	case 0x1:
-	case 0x2:
+	case 0x3:
 		if (encoder->armed)
-			encoder->dir = state - 1;
+			encoder->dir = 2 - state;
 		break;
 
-	case 0x3:
+	case 0x2:
 		encoder->armed = true;
 		break;
 	}
 
+	mutex_unlock(&encoder->access_mutex);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t rotary_encoder_half_period_irq(int irq, void *dev_id)
 {
 	struct rotary_encoder *encoder = dev_id;
-	int state;
+	unsigned int state;
 
-	state = rotary_encoder_get_state(encoder->pdata);
+	mutex_lock(&encoder->access_mutex);
 
-	switch (state) {
-	case 0x00:
-	case 0x03:
+	state = rotary_encoder_get_state(encoder);
+
+	if (state & 1) {
+		encoder->dir = ((encoder->last_stable - state + 1) % 4) - 1;
+	} else {
 		if (state != encoder->last_stable) {
 			rotary_encoder_report_event(encoder);
 			encoder->last_stable = state;
 		}
-		break;
-
-	case 0x01:
-	case 0x02:
-		encoder->dir = (encoder->last_stable + state) & 0x01;
-		break;
 	}
 
+	mutex_unlock(&encoder->access_mutex);
+
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t rotary_encoder_quarter_period_irq(int irq, void *dev_id)
 {
 	struct rotary_encoder *encoder = dev_id;
-	unsigned char sum;
-	int state;
+	unsigned int state;
 
-	state = rotary_encoder_get_state(encoder->pdata);
+	mutex_lock(&encoder->access_mutex);
 
-	/*
-	 * We encode the previous and the current state using a byte.
-	 * The previous state in the MSB nibble, the current state in the LSB
-	 * nibble. Then use a table to decide the direction of the turn.
-	 */
-	sum = (encoder->last_stable << 4) + state;
-	switch (sum) {
-	case 0x31:
-	case 0x10:
-	case 0x02:
-	case 0x23:
-		encoder->dir = 0; /* clockwise */
-		break;
+	state = rotary_encoder_get_state(encoder);
 
-	case 0x13:
-	case 0x01:
-	case 0x20:
-	case 0x32:
-		encoder->dir = 1; /* counter-clockwise */
-		break;
-
-	default:
-		/*
-		 * Ignore all other values. This covers the case when the
-		 * state didn't change (a spurious interrupt) and the
-		 * cases where the state changed by two steps, making it
-		 * impossible to tell the direction.
-		 *
-		 * In either case, don't report any event and save the
-		 * state for later.
-		 */
+	if ((encoder->last_stable + 1) % 4 == state)
+		encoder->dir = 1;
+	else if (encoder->last_stable == (state + 1) % 4)
+		encoder->dir = -1;
+	else
 		goto out;
-	}
 
 	rotary_encoder_report_event(encoder);
 
 out:
 	encoder->last_stable = state;
+	mutex_unlock(&encoder->access_mutex);
+
 	return IRQ_HANDLED;
 }
 
+static int rotary_encoder_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rotary_encoder *encoder;
+	struct input_dev *input;
+	irq_handler_t handler;
+	u32 steps_per_period;
+	unsigned int i;
+	int err;
+
+	encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
+	if (!encoder)
+		return -ENOMEM;
+
+	mutex_init(&encoder->access_mutex);
+
+	device_property_read_u32(dev, "rotary-encoder,steps", &encoder->steps);
+
+	err = device_property_read_u32(dev, "rotary-encoder,steps-per-period",
+				       &steps_per_period);
+	if (err) {
+		/*
+		 * The 'half-period' property has been deprecated, you must
+		 * use 'steps-per-period' and set an appropriate value, but
+		 * we still need to parse it to maintain compatibility. If
+		 * neither property is present we fall back to the one step
+		 * per period behavior.
+		 */
+		steps_per_period = device_property_read_bool(dev,
+					"rotary-encoder,half-period") ? 2 : 1;
+	}
+
+	encoder->rollover =
+		device_property_read_bool(dev, "rotary-encoder,rollover");
+
+	device_property_read_u32(dev, "linux,axis", &encoder->axis);
+	encoder->relative_axis =
+		device_property_read_bool(dev, "rotary-encoder,relative-axis");
+
+	encoder->gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
+	if (IS_ERR(encoder->gpios)) {
+		dev_err(dev, "unable to get gpios\n");
+		return PTR_ERR(encoder->gpios);
+	}
+	if (encoder->gpios->ndescs < 2) {
+		dev_err(dev, "not enough gpios found\n");
+		return -EINVAL;
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	encoder->input = input;
+
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+
+	if (encoder->relative_axis)
+		input_set_capability(input, EV_REL, encoder->axis);
+	else
+		input_set_abs_params(input,
+				     encoder->axis, 0, encoder->steps, 0, 1);
+
+	switch (steps_per_period >> (encoder->gpios->ndescs - 2)) {
+	case 4:
+		handler = &rotary_encoder_quarter_period_irq;
+		encoder->last_stable = rotary_encoder_get_state(encoder);
+		break;
+	case 2:
+		handler = &rotary_encoder_half_period_irq;
+		encoder->last_stable = rotary_encoder_get_state(encoder);
+		break;
+	case 1:
+		handler = &rotary_encoder_irq;
+		break;
+	default:
+		dev_err(dev, "'%d' is not a valid steps-per-period value\n",
+			steps_per_period);
+		return -EINVAL;
+	}
+
+	encoder->irq =
+		devm_kzalloc(dev,
+			     sizeof(*encoder->irq) * encoder->gpios->ndescs,
+			     GFP_KERNEL);
+	if (!encoder->irq)
+		return -ENOMEM;
+
+	for (i = 0; i < encoder->gpios->ndescs; ++i) {
+		encoder->irq[i] = gpiod_to_irq(encoder->gpios->desc[i]);
+
+		err = devm_request_threaded_irq(dev, encoder->irq[i],
+				NULL, handler,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+				IRQF_ONESHOT,
+				DRV_NAME, encoder);
+		if (err) {
+			dev_err(dev, "unable to request IRQ %d (gpio#%d)\n",
+				encoder->irq[i], i);
+			return err;
+		}
+	}
+
+	err = input_register_device(input);
+	if (err) {
+		dev_err(dev, "failed to register input device\n");
+		return err;
+	}
+
+	device_init_wakeup(dev,
+			   device_property_read_bool(dev, "wakeup-source"));
+
+	platform_set_drvdata(pdev, encoder);
+
+	return 0;
+}
+
+static int __maybe_unused rotary_encoder_suspend(struct device *dev)
+{
+	struct rotary_encoder *encoder = dev_get_drvdata(dev);
+	unsigned int i;
+
+	if (device_may_wakeup(dev)) {
+		for (i = 0; i < encoder->gpios->ndescs; ++i)
+			enable_irq_wake(encoder->irq[i]);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused rotary_encoder_resume(struct device *dev)
+{
+	struct rotary_encoder *encoder = dev_get_drvdata(dev);
+	unsigned int i;
+
+	if (device_may_wakeup(dev)) {
+		for (i = 0; i < encoder->gpios->ndescs; ++i)
+			disable_irq_wake(encoder->irq[i]);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rotary_encoder_pm_ops,
+			 rotary_encoder_suspend, rotary_encoder_resume);
+
 #ifdef CONFIG_OF
 static const struct of_device_id rotary_encoder_of_match[] = {
 	{ .compatible = "rotary-encoder", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, rotary_encoder_of_match);
-
-static struct rotary_encoder_platform_data *rotary_encoder_parse_dt(struct device *dev)
-{
-	const struct of_device_id *of_id =
-				of_match_device(rotary_encoder_of_match, dev);
-	struct device_node *np = dev->of_node;
-	struct rotary_encoder_platform_data *pdata;
-	enum of_gpio_flags flags;
-	int error;
-
-	if (!of_id || !np)
-		return NULL;
-
-	pdata = kzalloc(sizeof(struct rotary_encoder_platform_data),
-			GFP_KERNEL);
-	if (!pdata)
-		return ERR_PTR(-ENOMEM);
-
-	of_property_read_u32(np, "rotary-encoder,steps", &pdata->steps);
-	of_property_read_u32(np, "linux,axis", &pdata->axis);
-
-	pdata->gpio_a = of_get_gpio_flags(np, 0, &flags);
-	pdata->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
-
-	pdata->gpio_b = of_get_gpio_flags(np, 1, &flags);
-	pdata->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
-
-	pdata->relative_axis =
-		of_property_read_bool(np, "rotary-encoder,relative-axis");
-	pdata->rollover = of_property_read_bool(np, "rotary-encoder,rollover");
-
-	error = of_property_read_u32(np, "rotary-encoder,steps-per-period",
-				     &pdata->steps_per_period);
-	if (error) {
-		/*
-		 * The 'half-period' property has been deprecated, you must use
-		 * 'steps-per-period' and set an appropriate value, but we still
-		 * need to parse it to maintain compatibility.
-		 */
-		if (of_property_read_bool(np, "rotary-encoder,half-period")) {
-			pdata->steps_per_period = 2;
-		} else {
-			/* Fallback to one step per period behavior */
-			pdata->steps_per_period = 1;
-		}
-	}
-
-	pdata->wakeup_source = of_property_read_bool(np, "wakeup-source");
-
-	return pdata;
-}
-#else
-static inline struct rotary_encoder_platform_data *
-rotary_encoder_parse_dt(struct device *dev)
-{
-	return NULL;
-}
 #endif
 
-static int rotary_encoder_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	const struct rotary_encoder_platform_data *pdata = dev_get_platdata(dev);
-	struct rotary_encoder *encoder;
-	struct input_dev *input;
-	irq_handler_t handler;
-	int err;
-
-	if (!pdata) {
-		pdata = rotary_encoder_parse_dt(dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
-
-		if (!pdata) {
-			dev_err(dev, "missing platform data\n");
-			return -EINVAL;
-		}
-	}
-
-	encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL);
-	input = input_allocate_device();
-	if (!encoder || !input) {
-		err = -ENOMEM;
-		goto exit_free_mem;
-	}
-
-	encoder->input = input;
-	encoder->pdata = pdata;
-
-	input->name = pdev->name;
-	input->id.bustype = BUS_HOST;
-	input->dev.parent = dev;
-
-	if (pdata->relative_axis) {
-		input->evbit[0] = BIT_MASK(EV_REL);
-		input->relbit[0] = BIT_MASK(pdata->axis);
-	} else {
-		input->evbit[0] = BIT_MASK(EV_ABS);
-		input_set_abs_params(encoder->input,
-				     pdata->axis, 0, pdata->steps, 0, 1);
-	}
-
-	/* request the GPIOs */
-	err = gpio_request_one(pdata->gpio_a, GPIOF_IN, dev_name(dev));
-	if (err) {
-		dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_a);
-		goto exit_free_mem;
-	}
-
-	err = gpio_request_one(pdata->gpio_b, GPIOF_IN, dev_name(dev));
-	if (err) {
-		dev_err(dev, "unable to request GPIO %d\n", pdata->gpio_b);
-		goto exit_free_gpio_a;
-	}
-
-	encoder->irq_a = gpio_to_irq(pdata->gpio_a);
-	encoder->irq_b = gpio_to_irq(pdata->gpio_b);
-
-	switch (pdata->steps_per_period) {
-	case 4:
-		handler = &rotary_encoder_quarter_period_irq;
-		encoder->last_stable = rotary_encoder_get_state(pdata);
-		break;
-	case 2:
-		handler = &rotary_encoder_half_period_irq;
-		encoder->last_stable = rotary_encoder_get_state(pdata);
-		break;
-	case 1:
-		handler = &rotary_encoder_irq;
-		break;
-	default:
-		dev_err(dev, "'%d' is not a valid steps-per-period value\n",
-			pdata->steps_per_period);
-		err = -EINVAL;
-		goto exit_free_gpio_b;
-	}
-
-	err = request_irq(encoder->irq_a, handler,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  DRV_NAME, encoder);
-	if (err) {
-		dev_err(dev, "unable to request IRQ %d\n", encoder->irq_a);
-		goto exit_free_gpio_b;
-	}
-
-	err = request_irq(encoder->irq_b, handler,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  DRV_NAME, encoder);
-	if (err) {
-		dev_err(dev, "unable to request IRQ %d\n", encoder->irq_b);
-		goto exit_free_irq_a;
-	}
-
-	err = input_register_device(input);
-	if (err) {
-		dev_err(dev, "failed to register input device\n");
-		goto exit_free_irq_b;
-	}
-
-	device_init_wakeup(&pdev->dev, pdata->wakeup_source);
-
-	platform_set_drvdata(pdev, encoder);
-
-	return 0;
-
-exit_free_irq_b:
-	free_irq(encoder->irq_b, encoder);
-exit_free_irq_a:
-	free_irq(encoder->irq_a, encoder);
-exit_free_gpio_b:
-	gpio_free(pdata->gpio_b);
-exit_free_gpio_a:
-	gpio_free(pdata->gpio_a);
-exit_free_mem:
-	input_free_device(input);
-	kfree(encoder);
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(pdata);
-
-	return err;
-}
-
-static int rotary_encoder_remove(struct platform_device *pdev)
-{
-	struct rotary_encoder *encoder = platform_get_drvdata(pdev);
-	const struct rotary_encoder_platform_data *pdata = encoder->pdata;
-
-	device_init_wakeup(&pdev->dev, false);
-
-	free_irq(encoder->irq_a, encoder);
-	free_irq(encoder->irq_b, encoder);
-	gpio_free(pdata->gpio_a);
-	gpio_free(pdata->gpio_b);
-
-	input_unregister_device(encoder->input);
-	kfree(encoder);
-
-	if (!dev_get_platdata(&pdev->dev))
-		kfree(pdata);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int rotary_encoder_suspend(struct device *dev)
-{
-	struct rotary_encoder *encoder = dev_get_drvdata(dev);
-
-	if (device_may_wakeup(dev)) {
-		enable_irq_wake(encoder->irq_a);
-		enable_irq_wake(encoder->irq_b);
-	}
-
-	return 0;
-}
-
-static int rotary_encoder_resume(struct device *dev)
-{
-	struct rotary_encoder *encoder = dev_get_drvdata(dev);
-
-	if (device_may_wakeup(dev)) {
-		disable_irq_wake(encoder->irq_a);
-		disable_irq_wake(encoder->irq_b);
-	}
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(rotary_encoder_pm_ops,
-		 rotary_encoder_suspend, rotary_encoder_resume);
-
 static struct platform_driver rotary_encoder_driver = {
 	.probe		= rotary_encoder_probe,
-	.remove		= rotary_encoder_remove,
 	.driver		= {
 		.name	= DRV_NAME,
 		.pm	= &rotary_encoder_pm_ops,

drivers/input/mouse/elan_i2c_core.c

@@ -41,6 +41,7 @@
 
 #define DRIVER_NAME		"elan_i2c"
 #define ELAN_DRIVER_VERSION	"1.6.1"
+#define ELAN_VENDOR_ID		0x04f3
 #define ETP_MAX_PRESSURE	255
 #define ETP_FWIDTH_REDUCE	90
 #define ETP_FINGER_WIDTH	15
@@ -914,6 +915,8 @@ static int elan_setup_input_device(struct elan_tp_data *data)
 
 	input->name = "Elan Touchpad";
 	input->id.bustype = BUS_I2C;
+	input->id.vendor = ELAN_VENDOR_ID;
+	input->id.product = data->product_id;
 	input_set_drvdata(input, data);
 
 	error = input_mt_init_slots(input, ETP_MAX_FINGERS,

drivers/input/serio/parkbd.c

@@ -145,6 +145,7 @@ static int parkbd_getport(struct parport *pp)
 {
 	struct pardev_cb parkbd_parport_cb;
 
+	memset(&parkbd_parport_cb, 0, sizeof(parkbd_parport_cb));
 	parkbd_parport_cb.irq_func = parkbd_interrupt;
 	parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
 

drivers/input/tablet/aiptek.c

@@ -1819,6 +1819,14 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
 	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
 
+	/* Verify that a device really has an endpoint */
+	if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+		dev_err(&intf->dev,
+			"interface has %d endpoints, but must have minimum 1\n",
+			intf->altsetting[0].desc.bNumEndpoints);
+		err = -EINVAL;
+		goto fail3;
+	}
 	endpoint = &intf->altsetting[0].endpoint[0].desc;
 
 	/* Go set up our URB, which is called when the tablet receives
@@ -1861,6 +1869,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (i == ARRAY_SIZE(speeds)) {
 		dev_info(&intf->dev,
 			 "Aiptek tried all speeds, no sane response\n");
+		err = -EINVAL;
 		goto fail3;
 	}
 

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -2471,6 +2471,31 @@ static struct mxt_acpi_platform_data samus_platform_data[] = {
 	{ }
 };
 
+static unsigned int chromebook_tp_buttons[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data chromebook_platform_data[] = {
+	{
+		/* Touchpad */
+		.hid	= "ATML0000",
+		.pdata	= {
+			.t19_num_keys	= ARRAY_SIZE(chromebook_tp_buttons),
+			.t19_keymap	= chromebook_tp_buttons,
+		},
+	},
+	{
+		/* Touchscreen */
+		.hid	= "ATML0001",
+	},
+	{ }
+};
+
 static const struct dmi_system_id mxt_dmi_table[] = {
 	{
 		/* 2015 Google Pixel */
@@ -2481,6 +2506,14 @@ static const struct dmi_system_id mxt_dmi_table[] = {
 		},
 		.driver_data = samus_platform_data,
 	},
+	{
+		/* Other Google Chromebooks */
+		.ident = "Chromebook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+		},
+		.driver_data = chromebook_platform_data,
+	},
 	{ }
 };
 
@@ -2685,6 +2718,7 @@ static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
 	{ "atmel_mxt_tp", 0 },
+	{ "maxtouch", 0 },
 	{ "mXT224", 0 },
 	{ }
 };

drivers/input/touchscreen/elants_i2c.c

@@ -1316,7 +1316,13 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
 
 	disable_irq(client->irq);
 
-	if (device_may_wakeup(dev) || ts->keep_power_in_suspend) {
+	if (device_may_wakeup(dev)) {
+		/*
+		 * The device will automatically enter idle mode
+		 * that has reduced power consumption.
+		 */
+		ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+	} else if (ts->keep_power_in_suspend) {
 		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 			error = elants_i2c_send(client, set_sleep_cmd,
 						sizeof(set_sleep_cmd));
@@ -1326,10 +1332,6 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
 			dev_err(&client->dev,
 				"suspend command failed: %d\n", error);
 		}
-
-		if (device_may_wakeup(dev))
-			ts->wake_irq_enabled =
-					(enable_irq_wake(client->irq) == 0);
 	} else {
 		elants_i2c_power_off(ts);
 	}
@@ -1345,10 +1347,11 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
 	int retry_cnt;
 	int error;
 
-	if (device_may_wakeup(dev) && ts->wake_irq_enabled)
-		disable_irq_wake(client->irq);
-
-	if (ts->keep_power_in_suspend) {
+	if (device_may_wakeup(dev)) {
+		if (ts->wake_irq_enabled)
+			disable_irq_wake(client->irq);
+		elants_i2c_sw_reset(client);
+	} else if (ts->keep_power_in_suspend) {
 		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 			error = elants_i2c_send(client, set_active_cmd,
 						sizeof(set_active_cmd));