Merge tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - batched unmap support for the IOMMU-API

 - support for unlocked command queueing in the ARM-SMMU driver

 - rework the ATS support in the ARM-SMMU driver

 - more refactoring in the ARM-SMMU driver to support hardware
   implemention specific quirks and errata

 - bounce buffering DMA-API implementatation in the Intel VT-d driver
   for untrusted devices (like Thunderbolt devices)

 - fixes for runtime PM support in the OMAP iommu driver

 - MT8183 IOMMU support in the Mediatek IOMMU driver

 - rework of the way the IOMMU core sets the default domain type for
   groups. Changing the default domain type on x86 does not require two
   kernel parameters anymore.

 - more smaller fixes and cleanups

* tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits)
  iommu/vt-d: Declare Broadwell igfx dmar support snafu
  iommu/vt-d: Add Scalable Mode fault information
  iommu/vt-d: Use bounce buffer for untrusted devices
  iommu/vt-d: Add trace events for device dma map/unmap
  iommu/vt-d: Don't switch off swiotlb if bounce page is used
  iommu/vt-d: Check whether device requires bounce buffer
  swiotlb: Split size parameter to map/unmap APIs
  iommu/omap: Mark pm functions __maybe_unused
  iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3
  iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order
  iommu: Don't use sme_active() in generic code
  iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS
  iommu/qcom: Use struct_size() helper
  iommu: Remove wrong default domain comments
  iommu/dma: Fix for dereferencing before null checking
  iommu/mediatek: Clean up struct mtk_smi_iommu
  memory: mtk-smi: Get rid of need_larbid
  iommu/mediatek: Fix VLD_PA_RNG register backup when suspend
  memory: mtk-smi: Add bus_sel for mt8183
  memory: mtk-smi: Invoke pm runtime_callback to enable clocks
  ...

Documentation/devicetree/bindings/iommu/mediatek,iommu.txt

@@ -11,10 +11,23 @@ ARM Short-Descriptor translation table format for address translation.
                |
               m4u (Multimedia Memory Management Unit)
                |
+          +--------+
+          |        |
+      gals0-rx   gals1-rx    (Global Async Local Sync rx)
+          |        |
+          |        |
+      gals0-tx   gals1-tx    (Global Async Local Sync tx)
+          |        |          Some SoCs may have GALS.
+          +--------+
+               |
            SMI Common(Smart Multimedia Interface Common)
                |
        +----------------+-------
        |                |
+       |             gals-rx        There may be GALS in some larbs.
+       |                |
+       |                |
+       |             gals-tx
        |                |
    SMI larb0        SMI larb1   ... SoCs have several SMI local arbiter(larb).
    (display)         (vdec)
@@ -36,6 +49,10 @@ each local arbiter.
 like display, video decode, and camera. And there are different ports
 in each larb. Take a example, There are many ports like MC, PP, VLD in the
 video decode local arbiter, all these ports are according to the video HW.
+  In some SoCs, there may be a GALS(Global Async Local Sync) module between
+smi-common and m4u, and additional GALS module between smi-larb and
+smi-common. GALS can been seen as a "asynchronous fifo" which could help
+synchronize for the modules in different clock frequency.
 
 Required properties:
 - compatible : must be one of the following string:
@@ -44,18 +61,25 @@ Required properties:
 	"mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
 						     generation one m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
+	"mediatek,mt8183-m4u" for mt8183 which uses generation two m4u HW.
 - reg : m4u register base and size.
 - interrupts : the interrupt of m4u.
 - clocks : must contain one entry for each clock-names.
-- clock-names : must be "bclk", It is the block clock of m4u.
+- clock-names : Only 1 optional clock:
+  - "bclk": the block clock of m4u.
+  Here is the list which require this "bclk":
+  - mt2701, mt2712, mt7623 and mt8173.
+  Note that m4u use the EMI clock which always has been enabled before kernel
+  if there is no this "bclk".
 - mediatek,larbs : List of phandle to the local arbiters in the current Socs.
 	Refer to bindings/memory-controllers/mediatek,smi-larb.txt. It must sort
 	according to the local arbiter index, like larb0, larb1, larb2...
 - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
 	Specifies the mtk_m4u_id as defined in
 	dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
-	dt-binding/memory/mt2712-larb-port.h for mt2712, and
-	dt-binding/memory/mt8173-larb-port.h for mt8173.
+	dt-binding/memory/mt2712-larb-port.h for mt2712,
+	dt-binding/memory/mt8173-larb-port.h for mt8173, and
+	dt-binding/memory/mt8183-larb-port.h for mt8183.
 
 Example:
 	iommu: iommu@10205000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt

@@ -2,9 +2,10 @@ SMI (Smart Multimedia Interface) Common
 
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
-Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
-the second generation of SMI HW while mt2701 uses the first generation HW of
-SMI.
+Mediatek SMI have two generations of HW architecture, here is the list
+which generation the SoCs use:
+generation 1: mt2701 and mt7623.
+generation 2: mt2712, mt8173 and mt8183.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -19,6 +20,7 @@ Required properties:
 	"mediatek,mt2712-smi-common"
 	"mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
 	"mediatek,mt8173-smi-common"
+	"mediatek,mt8183-smi-common"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
 - clocks : Must contain an entry for each entry in clock-names.
@@ -30,6 +32,10 @@ Required properties:
 	    They may be the same if both source clocks are the same.
   - "async" : asynchronous clock, it help transform the smi clock into the emi
 	      clock domain, this clock is only needed by generation 1 smi HW.
+  and these 2 option clocks for generation 2 smi HW:
+  - "gals0": the path0 clock of GALS(Global Async Local Sync).
+  - "gals1": the path1 clock of GALS(Global Async Local Sync).
+  Here is the list which has this GALS: mt8183.
 
 Example:
 	smi_common: smi@14022000 {

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt

@@ -8,6 +8,7 @@ Required properties:
 		"mediatek,mt2712-smi-larb"
 		"mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
 		"mediatek,mt8173-smi-larb"
+		"mediatek,mt8183-smi-larb"
 - reg : the register and size of this local arbiter.
 - mediatek,smi : a phandle to the smi_common node.
 - power-domains : a phandle to the power domain of this local arbiter.
@@ -16,6 +17,9 @@ Required properties:
   - "apb" : Advanced Peripheral Bus clock, It's the clock for setting
 	    the register.
   - "smi" : It's the clock for transfer data and command.
+  and this optional clock name:
+  - "gals": the clock for GALS(Global Async Local Sync).
+  Here is the list which has this GALS: mt8183.
 
 Required property for mt2701, mt2712 and mt7623:
 - mediatek,larb-id :the hardware id of this larb.