Merge branch 'for-next/perf' into for-next/core

- Support for additional PMU topologies on HiSilicon platforms
- Support for CCN-512 interconnect PMU
- Support for AXI ID filtering in the IMX8 DDR PMU
- Support for the CCPI2 uncore PMU in ThunderX2
- Driver cleanup to use devm_platform_ioremap_resource()

* for-next/perf:
  drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
  perf/imx_ddr: Dump AXI ID filter info to userspace
  docs/perf: Add AXI ID filter capabilities information
  perf/imx_ddr: Add driver for DDR PMU in i.MX8MPlus
  perf/imx_ddr: Add enhanced AXI ID filter support
  bindings: perf: imx-ddr: Add new compatible string
  docs/perf: Add explanation for DDR_CAP_AXI_ID_FILTER_ENHANCED quirk
  arm64: perf: Simplify the ARMv8 PMUv3 event attributes
  drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.
  Documentation: perf: Update documentation for ThunderX2 PMU uncore driver
  Documentation: Add documentation for CCN-512 DTS binding
  perf: arm-ccn: Enable stats for CCN-512 interconnect
  perf/smmuv3: use devm_platform_ioremap_resource() to simplify code
  perf/arm-cci: use devm_platform_ioremap_resource() to simplify code
  perf/arm-ccn: use devm_platform_ioremap_resource() to simplify code
  perf: xgene: use devm_platform_ioremap_resource() to simplify code
  perf: hisi: use devm_platform_ioremap_resource() to simplify code

Documentation/admin-guide/perf/imx-ddr.rst

@@ -17,7 +17,8 @@ The "format" directory describes format of the config (event ID) and config1
 (AXI filtering) fields of the perf_event_attr structure, see /sys/bus/event_source/
 devices/imx8_ddr0/format/. The "events" directory describes the events types
 hardware supported that can be used with perf tool, see /sys/bus/event_source/
-devices/imx8_ddr0/events/.
+devices/imx8_ddr0/events/. The "caps" directory describes filter features implemented
+in DDR PMU, see /sys/bus/events_source/devices/imx8_ddr0/caps/.
   e.g.::
         perf stat -a -e imx8_ddr0/cycles/ cmd
         perf stat -a -e imx8_ddr0/read/,imx8_ddr0/write/ cmd
@@ -25,9 +26,12 @@ devices/imx8_ddr0/events/.
 AXI filtering is only used by CSV modes 0x41 (axid-read) and 0x42 (axid-write)
 to count reading or writing matches filter setting. Filter setting is various
 from different DRAM controller implementations, which is distinguished by quirks
-in the driver.
+in the driver. You also can dump info from userspace, filter in "caps" directory
+indicates whether PMU supports AXI ID filter or not; enhanced_filter indicates
+whether PMU supports enhanced AXI ID filter or not. Value 0 for un-supported, and
+value 1 for supported.
 
-* With DDR_CAP_AXI_ID_FILTER quirk.
+* With DDR_CAP_AXI_ID_FILTER quirk(filter: 1, enhanced_filter: 0).
   Filter is defined with two configuration parts:
   --AXI_ID defines AxID matching value.
   --AXI_MASKING defines which bits of AxID are meaningful for the matching.
@@ -50,3 +54,8 @@ in the driver.
   axi_id to monitor a specific id, rather than having to specify axi_mask.
   e.g.::
         perf stat -a -e imx8_ddr0/axid-read,axi_id=0x12/ cmd, which will monitor ARID=0x12
+
+* With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1).
+  This is an extension to the DDR_CAP_AXI_ID_FILTER quirk which permits
+  counting the number of bytes (as opposed to the number of bursts) from DDR
+  read and write transactions concurrently with another set of data counters.

Documentation/admin-guide/perf/thunderx2-pmu.rst

@@ -3,24 +3,26 @@ Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
 =============================================================
 
 The ThunderX2 SoC PMU consists of independent, system-wide, per-socket
-PMUs such as the Level 3 Cache (L3C) and DDR4 Memory Controller (DMC).
+PMUs such as the Level 3 Cache (L3C), DDR4 Memory Controller (DMC) and
+Cavium Coherent Processor Interconnect (CCPI2).
 
 The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles.
 Events are counted for the default channel (i.e. channel 0) and prorated
 to the total number of channels/tiles.
 
-The DMC and L3C support up to 4 counters. Counters are independently
-programmable and can be started and stopped individually. Each counter
-can be set to a different event. Counters are 32-bit and do not support
-an overflow interrupt; they are read every 2 seconds.
+The DMC and L3C support up to 4 counters, while the CCPI2 supports up to 8
+counters. Counters are independently programmable to different events and
+can be started and stopped individually. None of the counters support an
+overflow interrupt. DMC and L3C counters are 32-bit and read every 2 seconds.
+The CCPI2 counters are 64-bit and assumed not to overflow in normal operation.
 
 PMU UNCORE (perf) driver:
 
 The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
-L3C devices.  Each PMU can be used to count up to 4 events
-simultaneously. The PMUs provide a description of their available events
-and configuration options under sysfs, see
-/sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id.
+L3C devices.  Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
+(CCPI2) events simultaneously. The PMUs provide a description of their
+available events and configuration options under sysfs, see
+/sys/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
 
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.