Merge tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - Allow compiling the ARM-SMMU drivers as modules.

 - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code
   collected by Will Deacon. The merge-commit (6855d1ba75) has all the
   details.

 - Cleanup of the iommu_put_resv_regions() call-backs in various
   drivers.

 - AMD IOMMU driver cleanups.

 - Update for the x2APIC support in the AMD IOMMU driver.

 - Preparation patches for Intel VT-d nested mode support.

 - RMRR and identity domain handling fixes for the Intel VT-d driver.

 - More small fixes and cleanups.

* tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/amd: Remove the unnecessary assignment
  iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
  iommu/vt-d: Unnecessary to handle default identity domain
  iommu/vt-d: Allow devices with RMRRs to use identity domain
  iommu/vt-d: Add RMRR base and end addresses sanity check
  iommu/vt-d: Mark firmware tainted if RMRR fails sanity check
  iommu/amd: Remove unused struct member
  iommu/amd: Replace two consecutive readl calls with one readq
  iommu/vt-d: Don't reject Host Bridge due to scope mismatch
  PCI/ATS: Add PASID stubs
  iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device
  iommu/arm-smmu-v3: Improve add_device() error handling
  iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
  iommu/arm-smmu-v3: Add second level of context descriptor table
  iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure
  iommu/arm-smmu-v3: Propagate ssid_bits
  iommu/arm-smmu-v3: Add support for Substream IDs
  iommu/arm-smmu-v3: Add context descriptor tables allocators
  iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support
  ACPI/IORT: Parse SSID property of named component node
  ...
This commit is contained in:
Linus Torvalds
2020-02-05 17:49:54 +00:00
36 changed files with 1685 additions and 821 deletions

View File

@@ -71,6 +71,8 @@
#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_IW 0x04
#define IVMD_FLAG_IR 0x02
#define IVMD_FLAG_UNITY_MAP 0x01
#define ACPI_DEVFLAG_INITPASS 0x01
@@ -147,7 +149,7 @@ bool amd_iommu_dump;
bool amd_iommu_irq_remap __read_mostly;
int amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_VAPIC;
static int amd_iommu_xt_mode = IRQ_REMAP_X2APIC_MODE;
static int amd_iommu_xt_mode = IRQ_REMAP_XAPIC_MODE;
static bool amd_iommu_detected;
static bool __initdata amd_iommu_disabled;
@@ -714,7 +716,7 @@ static void iommu_enable_ppr_log(struct amd_iommu *iommu)
writel(0x00, iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
writel(0x00, iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
iommu_feature_enable(iommu, CONTROL_PPFLOG_EN);
iommu_feature_enable(iommu, CONTROL_PPRLOG_EN);
iommu_feature_enable(iommu, CONTROL_PPR_EN);
}
@@ -1116,21 +1118,17 @@ static int __init add_early_maps(void)
*/
static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
{
struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
if (!(m->flags & IVMD_FLAG_EXCL_RANGE))
return;
if (iommu) {
/*
* We only can configure exclusion ranges per IOMMU, not
* per device. But we can enable the exclusion range per
* device. This is done here
*/
set_dev_entry_bit(devid, DEV_ENTRY_EX);
iommu->exclusion_start = m->range_start;
iommu->exclusion_length = m->range_length;
}
/*
* Treat per-device exclusion ranges as r/w unity-mapped regions
* since some buggy BIOSes might lead to the overwritten exclusion
* range (exclusion_start and exclusion_length members). This
* happens when there are multiple exclusion ranges (IVMD entries)
* defined in ACPI table.
*/
m->flags = (IVMD_FLAG_IW | IVMD_FLAG_IR | IVMD_FLAG_UNITY_MAP);
}
/*
@@ -1523,8 +1521,6 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
if (((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0))
amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
if (((h->efr_attr & (0x1 << IOMMU_FEAT_XTSUP_SHIFT)) == 0))
amd_iommu_xt_mode = IRQ_REMAP_XAPIC_MODE;
break;
case 0x11:
case 0x40:
@@ -1534,8 +1530,15 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
if (((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0))
amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
if (((h->efr_reg & (0x1 << IOMMU_EFR_XTSUP_SHIFT)) == 0))
amd_iommu_xt_mode = IRQ_REMAP_XAPIC_MODE;
/*
* Note: Since iommu_update_intcapxt() leverages
* the IOMMU MMIO access to MSI capability block registers
* for MSI address lo/hi/data, we need to check both
* EFR[XtSup] and EFR[MsiCapMmioSup] for x2APIC support.
*/
if ((h->efr_reg & BIT(IOMMU_EFR_XTSUP_SHIFT)) &&
(h->efr_reg & BIT(IOMMU_EFR_MSICAPMMIOSUP_SHIFT)))
amd_iommu_xt_mode = IRQ_REMAP_X2APIC_MODE;
break;
default:
return -EINVAL;
@@ -1727,7 +1730,6 @@ static const struct attribute_group *amd_iommu_groups[] = {
static int __init iommu_init_pci(struct amd_iommu *iommu)
{
int cap_ptr = iommu->cap_ptr;
u32 range, misc, low, high;
int ret;
iommu->dev = pci_get_domain_bus_and_slot(0, PCI_BUS_NUM(iommu->devid),
@@ -1740,19 +1742,12 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_CAP_HDR_OFFSET,
&iommu->cap);
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_RANGE_OFFSET,
&range);
pci_read_config_dword(iommu->dev, cap_ptr + MMIO_MISC_OFFSET,
&misc);
if (!(iommu->cap & (1 << IOMMU_CAP_IOTLB)))
amd_iommu_iotlb_sup = false;
/* read extended feature bits */
low = readl(iommu->mmio_base + MMIO_EXT_FEATURES);
high = readl(iommu->mmio_base + MMIO_EXT_FEATURES + 4);
iommu->features = ((u64)high << 32) | low;
iommu->features = readq(iommu->mmio_base + MMIO_EXT_FEATURES);
if (iommu_feature(iommu, FEATURE_GT)) {
int glxval;
@@ -1996,8 +1991,8 @@ static int iommu_init_intcapxt(struct amd_iommu *iommu)
struct irq_affinity_notify *notify = &iommu->intcapxt_notify;
/**
* IntCapXT requires XTSup=1, which can be inferred
* amd_iommu_xt_mode.
* IntCapXT requires XTSup=1 and MsiCapMmioSup=1,
* which can be inferred from amd_iommu_xt_mode.
*/
if (amd_iommu_xt_mode != IRQ_REMAP_X2APIC_MODE)
return 0;
@@ -2044,7 +2039,7 @@ enable_faults:
iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
if (iommu->ppr_log != NULL)
iommu_feature_enable(iommu, CONTROL_PPFINT_EN);
iommu_feature_enable(iommu, CONTROL_PPRINT_EN);
iommu_ga_log_enable(iommu);