net: stmmac: Add support for U32 TC filter using Flexible RX Parser

This adds support for U32 filter by using an HW only feature called
Flexible RX Parser. This allow us to match any given packet field with a
pattern and accept/reject or even route the packet to a specific DMA
channel.

Right now we only support acception or rejection of frame and we only
support simple rules. Though, the Parser has the flexibility of jumping to
specific rules as an if condition so complex rules can be established.

This is only supported in GMAC5.10+.

The following commands can be used to test this code:

	1) Setup an ingress qdisk:
	# tc qdisc add dev eth0 handle ffff: ingress

	2) Setup a filter (e.g. filter by IP):
	# tc filter add dev eth0 parent ffff: protocol ip u32 match ip \
		src 192.168.0.3 skip_sw action drop

In every tests performed we always used the "skip_sw" flag to make sure
only the RX Parser was involved.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/dwmac5.h

@@ -11,6 +11,17 @@
 #define PRTYEN				BIT(1)
 #define TMOUTEN				BIT(0)
 
+#define MTL_RXP_CONTROL_STATUS		0x00000ca0
+#define RXPI				BIT(31)
+#define NPE				GENMASK(23, 16)
+#define NVE				GENMASK(7, 0)
+#define MTL_RXP_IACC_CTRL_STATUS	0x00000cb0
+#define STARTBUSY			BIT(31)
+#define RXPEIEC				GENMASK(22, 21)
+#define RXPEIEE				BIT(20)
+#define WRRDN				BIT(16)
+#define ADDR				GENMASK(15, 0)
+#define MTL_RXP_IACC_DATA		0x00000cb4
 #define MTL_ECC_CONTROL			0x00000cc0
 #define TSOEE				BIT(4)
 #define MRXPEE				BIT(3)
@@ -48,5 +59,7 @@ int dwmac5_safety_feat_irq_status(struct net_device *ndev,
 		struct stmmac_safety_stats *stats);
 int dwmac5_safety_feat_dump(struct stmmac_safety_stats *stats,
 			int index, unsigned long *count, const char **desc);
+int dwmac5_rxp_config(void __iomem *ioaddr, struct stmmac_tc_entry *entries,
+		      unsigned int count);
 
 #endif /* __DWMAC5_H__ */