Merge tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
MMC highlights for 3.3: Core: * Support for the HS200 high-speed eMMC mode. * Support SDIO 3.0 Ultra High Speed cards. * Kill pending block requests immediately if card is removed. * Enable the eMMC feature for locking boot partitions read-only until next power on, exposed via sysfs. Drivers: * Runtime PM support for Intel Medfield SDIO. * Suspend/resume support for sdhci-spear. * sh-mmcif now processes requests asynchronously. * tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits) mmc: fix a deadlock between system suspend and MMC block IO mmc: sdhci: restore the enabled dma when do reset all mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation mmc: host: Adds support for eMMC 4.5 HS200 mode mmc: core: HS200 mode support for eMMC 4.5 mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT() mmc: core: Separate the timeout value for cache-ctrl mmc: sdhci-spear: Fix compilation error mmc: sdhci: Deal with failure case in sdhci_suspend_host mmc: dw_mmc: Clear the DDR mode for non-DDR mmc: sd: Fix SDR12 timing regression mmc: sdhci: Fix tuning timer incorrect setting when suspending host mmc: core: Add option to prevent eMMC sleep command mmc: omap_hsmmc: use threaded irq handler for card-detect. mmc: sdhci-pci: enable runtime PM for Medfield SDIO mmc: sdhci: Always pass clock request value zero to set_clock host op mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION mmc: sdhci-pci: get gpio numbers from platform data mmc: sdhci-pci: add platform data mmc: sdhci: prevent card detection activity for non-removable cards ...
This commit is contained in:
@@ -64,3 +64,13 @@ Note on Erase Size and Preferred Erase Size:
|
||||
size specified by the card.
|
||||
|
||||
"preferred_erase_size" is in bytes.
|
||||
|
||||
SD/MMC/SDIO Clock Gating Attribute
|
||||
==================================
|
||||
|
||||
Read and write access is provided to following attribute.
|
||||
This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
|
||||
|
||||
clkgate_delay Tune the clock gating delay with desired value in milliseconds.
|
||||
|
||||
echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay
|
||||
|
@@ -25,3 +25,16 @@ echo 0 > /sys/block/mmcblkXbootY/force_ro
|
||||
To re-enable read-only access:
|
||||
|
||||
echo 1 > /sys/block/mmcblkXbootY/force_ro
|
||||
|
||||
The boot partitions can also be locked read only until the next power on,
|
||||
with:
|
||||
|
||||
echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
|
||||
|
||||
This is a feature of the card and not of the kernel. If the card does
|
||||
not support boot partition locking, the file will not exist. If the
|
||||
feature has been disabled on the card, the file will be read-only.
|
||||
|
||||
The boot partitions can also be locked permanently, but this feature is
|
||||
not accessible through sysfs in order to avoid accidental or malicious
|
||||
bricking.
|
||||
|
Reference in New Issue
Block a user