Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

Documentation/devicetree/bindings/mfd/da9052-i2c.txt

@@ -0,0 +1,60 @@
+* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
+			 "dlg,da9053-ab", or "dlg,da9053-bb"
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9052/53 regulators are
+  bound using their names as listed below:
+
+    buck0     : regulator BUCK0
+    buck1     : regulator BUCK1
+    buck2     : regulator BUCK2
+    buck3     : regulator BUCK3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+    ldo7      : regulator LDO7
+    ldo8      : regulator LDO8
+    ldo9      : regulator LDO9
+    ldo10     : regulator LDO10
+    ldo11     : regulator LDO11
+    ldo12     : regulator LDO12
+    ldo13     : regulator LDO13
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+Examples:
+
+i2c@63fc8000 { /* I2C1 */
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa";
+		reg = <0x48>;
+
+		regulators {
+			buck0 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+			};
+
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			buck3 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/mfd/tps65910.txt

@@ -0,0 +1,133 @@
+TPS65910 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "ti,tps65910" or "ti,tps65911"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- #gpio-cells: number of cells to describe a GPIO, this should be 2.
+  The first cell is the GPIO number.
+  The second cell is used to specify additional options <unused>.
+- gpio-controller: mark the device as a GPIO controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+  The first cell is the IRQ number.
+  The second cell is the flags, encoded as the trigger masks from
+  Documentation/devicetree/bindings/interrupts.txt
+- regulators: This is the list of child nodes that specify the regulator
+  initialization data for defined regulators. Not all regulators for the given
+  device need to be present. The definition for each of these nodes is defined
+  using the standard binding for regulators found at
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  The valid names for regulators are:
+  tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
+            vaux2, vaux33, vmmc
+  tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
+            ldo6, ldo7, ldo8
+
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+  comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+  There should be 9 entries here, one for each gpio.
+
+Regulator Optional properties:
+- ti,regulator-ext-sleep-control: enable external sleep
+  control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
+  If this property is not defined, it defaults to 0 (not enabled).
+
+Example:
+
+	pmu: tps65910@d2 {
+		compatible = "ti,tps65910";
+		reg = <0xd2>;
+		interrupt-parent = <&intc>;
+		interrupts = < 0 118 0x04 >;
+
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,vmbch-threshold = 0;
+		ti,vmbch2-threshold = 0;
+
+		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+
+		regulators {
+			vdd1_reg: vdd1 {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vdd2_reg: vdd2 {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <4>;
+			};
+			vddctrl_reg: vddctrl {
+				regulator-min-microvolt = < 600000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			vio_reg: vio {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo5_reg: ldo5 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo6_reg: ldo6 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				ti,regulator-ext-sleep-control = <0>;
+			};
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+			ldo8_reg: ldo8 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				ti,regulator-ext-sleep-control = <1>;
+			};
+		};
+	};

Documentation/devicetree/bindings/mfd/twl6040.txt

@@ -0,0 +1,62 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio
+and vibra functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : Must be "ti,twl6040";
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+
+Vibra functionality
+Required properties:
+- vddvibl-supply: Regulator for the left vibra motor
+- vddvibr-supply: Regulator for the right vibra motor
+- vibra { }: Configuration section for vibra parameters containing the following
+	     properties:
+- ti,vibldrv-res: Resistance parameter for left driver
+- ti,vibrdrv-res: Resistance parameter for right driver
+- ti,viblmotor-res: Resistance parameter for left motor
+- ti,viblmotor-res: Resistance parameter for right motor
+
+Optional properties within vibra { } section:
+- vddvibl_uV: If the vddvibl default voltage need to be changed
+- vddvibr_uV: If the vddvibr default voltage need to be changed
+
+Example:
+&i2c1 {
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		interrupts = <0 119 4>;
+		interrupt-parent = <&gic>;
+		twl6040,audpwron-gpio = <&gpio4 31 0>;
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+
+		/* regulators for vibra motor */
+		vddvibl-supply = <&vbat>;
+		vddvibr-supply = <&vbat>;
+
+		vibra {
+			/* Vibra driver, motor resistance parameters */
+			ti,vibldrv-res = <8>;
+			ti,vibrdrv-res = <3>;
+			ti,viblmotor-res = <10>;
+			ti,vibrmotor-res = <10>;
+		};
+	};
+};