xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Koodi Ongelmat Pull-pyynnöt Actions Paketit Projektit Julkaisut Wiki Toiminta

Merge commit 'kumar/kumar-next' into next

Selaa lähdekoodia
This commit is contained in:
Benjamin Herrenschmidt
2009-01-05 14:16:48 +11:00
vanhempi b58602a4ba 068e8c9d02
commit 4aa12f7b92
26 muutettua tiedostoa jossa 686 lisäystä ja 71 poistoa
Download Patch File Download Diff File Expand all files Collapse all files

43
arch/powerpc/boot/dts/mpc836x_mds.dts
Näytä tiedosto

@@ -69,8 +69,18 @@
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr13: gpio-controller@d {
#gpio-cells = <2>;
compatible = "fsl,mpc8360mds-bcsr-gpio";
reg = <0xd 1>;
gpio-controller;
};
};
};
@@ -195,10 +205,21 @@
};
par_io@1400 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1400 0x100>;
ranges = <0 0x1400 0x100>;
device_type = "par_io";
num-ports = <7>;
qe_pio_b: gpio-controller@18 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x18 0x18>;
gpio-controller;
};
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -282,6 +303,15 @@
};
};
timer@440 {
compatible = "fsl,mpc8360-qe-gtm",
"fsl,qe-gtm", "fsl,gtm";
reg = <0x440 0x40>;
clock-frequency = <132000000>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
};
spi@4c0 {
cell-index = <0>;
compatible = "fsl,spi";
@@ -301,11 +331,20 @@
};
usb@6c0 {
compatible = "qe_udc";
compatible = "fsl,mpc8360-qe-usb",
"fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
mode = "slave";
fsl,fullspeed-clock = "clk21";
fsl,lowspeed-clock = "brg9";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&bcsr13 5 0 /* SPEED */
&bcsr13 4 1>; /* POWER */
};
enet0: ucc@2000 {

19
arch/powerpc/boot/dts/mpc836x_rdk.dts
Näytä tiedosto

@@ -218,8 +218,23 @@
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
/* filled by u-boot */
clock-frequency = <0>;
clock-frequency = <166666666>;
};
usb@6c0 {
compatible = "fsl,mpc8360-qe-usb",
"fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk21";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&qe_pio_e 20 0 /* SPEED */
&qe_pio_e 21 1 /* POWER */>;
};
spi@4c0 {

56
arch/powerpc/boot/dts/mpc8641_hpcn.dts
Näytä tiedosto

@@ -26,7 +26,13 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
rapidio0 = &rapidio0;
/*
* Only one of Rapid IO or PCI can be present due to HW limitations and
* due to the fact that the 2 now share address space in the new memory
* map. The most likely case is that we have PCI, so comment out the
* rapidio node. Leave it here for reference.
*/
/* rapidio0 = &rapidio0; */
};
cpus {
@@ -62,18 +68,17 @@
reg = <0x00000000 0x40000000>; // 1G at 0x0
};
localbus@f8005000 {
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xf8005000 0x1000>;
reg = <0xffe05000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 0xff800000 0x00800000
1 0 0xfe000000 0x01000000
2 0 0xf8200000 0x00100000
3 0 0xf8100000 0x00100000>;
ranges = <0 0 0xef800000 0x00800000
2 0 0xffdf8000 0x00008000
3 0 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
@@ -103,13 +108,13 @@
};
};
soc8641@f8000000 {
soc8641@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xf8000000 0x00100000>;
reg = <0xf8000000 0x00001000>; // CCSRBAR
ranges = <0x00000000 0xffe00000 0x00100000>;
reg = <0xffe00000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
i2c@3000 {
@@ -340,17 +345,17 @@
};
};
pci0: pcie@f8008000 {
pci0: pcie@ffe08000 {
cell-index = <0>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8008000 0x1000>;
reg = <0xffe08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
@@ -481,7 +486,7 @@
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00100000>;
0x0 0x00010000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
@@ -491,7 +496,7 @@
0x0 0x20000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00100000>;
0x0 0x00010000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
@@ -549,17 +554,17 @@
};
pci1: pcie@f8009000 {
pci1: pcie@ffe09000 {
cell-index = <1>;
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf8009000 0x1000>;
reg = <0xffe09000 0x1000>;
bus-range = <0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
@@ -582,18 +587,21 @@
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00100000>;
0x0 0x00010000>;
};
};
rapidio0: rapidio@f80c0000 {
/*
rapidio0: rapidio@ffec0000 {
#address-cells = <2>;
#size-cells = <2>;
compatible = "fsl,rapidio-delta";
reg = <0xf80c0000 0x20000>;
ranges = <0 0 0xc0000000 0 0x20000000>;
reg = <0xffec0000 0x20000>;
ranges = <0 0 0x80000000 0 0x20000000>;
interrupt-parent = <&mpic>;
/* err_irq bell_outb_irq bell_inb_irq
msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
// err_irq bell_outb_irq bell_inb_irq
// msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
};
*/
};