xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
派生 0
代码 工单 合并请求 工作流 软件包 项目 发布 百科 活动

[ACPI] ACPICA 20060113

浏览代码 
Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
这个提交包含在：
Bob Moore
2006-01-13 16:22:00 -05:00
提交者 Len Brown
父节点 3c5c363826
当前提交 4a90c7e862
共修改 142 个文件，包含 662 行新增和 1027 行删除
下载 Patch 文件 下载 Diff 文件 展开所有文件 折叠所有文件

59
drivers/acpi/executer/exoparg1.c
查看文件

@@ -6,7 +6,7 @@
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -111,7 +111,8 @@ acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state)
default: /* Unknown opcode */
ACPI_REPORT_ERROR(("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
@@ -188,7 +189,8 @@ acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state)
default: /* Unknown opcode */
ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n", walk_state->opcode));
ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
@@ -227,7 +229,8 @@ acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state)
default: /* Unknown opcode */
ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n", walk_state->opcode));
ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -346,9 +349,7 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
/* Check the range of the digit */
if (temp32 > 9) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"BCD digit too large (not decimal): 0x%X\n",
temp32));
ACPI_REPORT_ERROR(("BCD digit too large (not decimal): 0x%X\n", temp32));
status = AE_AML_NUMERIC_OVERFLOW;
goto cleanup;
@@ -393,12 +394,7 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
/* Overflow if there is any data left in Digit */
if (digit > 0) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Integer too large to convert to BCD: %8.8X%8.8X\n",
ACPI_FORMAT_UINT64(operand
[0]->
integer.
value)));
ACPI_REPORT_ERROR(("Integer too large to convert to BCD: %8.8X%8.8X\n", ACPI_FORMAT_UINT64(operand[0]->integer.value)));
status = AE_AML_NUMERIC_OVERFLOW;
goto cleanup;
}
@@ -525,15 +521,16 @@ acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
/* These are two obsolete opcodes */
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"%s is obsolete and not implemented\n",
acpi_ps_get_opcode_name(walk_state->opcode)));
ACPI_REPORT_ERROR(("%s is obsolete and not implemented\n",
acpi_ps_get_opcode_name(walk_state->
opcode)));
status = AE_SUPPORT;
goto cleanup;
default: /* Unknown opcode */
ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n", walk_state->opcode));
ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
@@ -639,11 +636,10 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
walk_state);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"%s: bad operand(s) %s\n",
acpi_ps_get_opcode_name(walk_state->
opcode),
acpi_format_exception(status)));
ACPI_REPORT_ERROR(("%s: bad operand(s) %s\n",
acpi_ps_get_opcode_name(walk_state->
opcode),
acpi_format_exception(status)));
goto cleanup;
}
@@ -742,9 +738,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
acpi_ut_get_type_name(type)));
ACPI_REPORT_ERROR(("Operand is not Buf/Int/Str/Pkg - found type %s\n", acpi_ut_get_type_name(type)));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
}
@@ -941,11 +935,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
default:
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unknown Index target_type %X in obj %p\n",
operand[0]->reference.
target_type,
operand[0]));
ACPI_REPORT_ERROR(("Unknown Index target_type %X in obj %p\n", operand[0]->reference.target_type, operand[0]));
status = AE_AML_OPERAND_TYPE;
goto cleanup;
}
@@ -971,11 +961,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unknown opcode in ref(%p) - %X\n",
operand[0],
operand[0]->reference.
opcode));
ACPI_REPORT_ERROR(("Unknown opcode in ref(%p) - %X\n", operand[0], operand[0]->reference.opcode));
status = AE_TYPE;
goto cleanup;
@@ -985,7 +971,8 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
default:
ACPI_REPORT_ERROR(("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n", walk_state->opcode));
ACPI_REPORT_ERROR(("Unknown AML opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}