ARM: imx6q: let users input debug uart port number

imx6q gets 5 uart ports in total.  Different board design may choose
different port as debug uart.  For example, imx6q-sabresd uses UART1,
imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4.  Rather than
bloating DEBUG_LL choice list with all these uart ports, the patch
introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number
when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/mach-imx/lluart.c

@@ -17,17 +17,25 @@
 
 #include "hardware.h"
 
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE	IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
 static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART2
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
-	.length		= MX6Q_UART2_SIZE,
-	.type		= MT_DEVICE,
-#endif
-#ifdef CONFIG_DEBUG_IMX6Q_UART4
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
-	.length		= MX6Q_UART4_SIZE,
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
+	.pfn		= __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
+	.length		= 0x4000,
 	.type		= MT_DEVICE,
 #endif
 };

arch/arm/mach-imx/mx6q.h

@@ -27,9 +27,5 @@
 #define MX6Q_CCM_SIZE			0x4000
 #define MX6Q_ANATOP_BASE_ADDR		0x020c8000
 #define MX6Q_ANATOP_SIZE		0x1000
-#define MX6Q_UART2_BASE_ADDR		0x021e8000
-#define MX6Q_UART2_SIZE			0x4000
-#define MX6Q_UART4_BASE_ADDR		0x021f0000
-#define MX6Q_UART4_SIZE			0x4000
 
 #endif	/* __MACH_MX6Q_H__ */