Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) cxgb3: fix premature page unmap ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts vlan: Fix register_vlan_dev() error path gro: Fix illegal merging of trailer trash sungem: Fix Serdes detection. net: fix mdio section mismatch warning ppp: fix BUG on non-linear SKB (multilink receive) ixgbe: Fixing EEH handler to handle more than one error net: Fix the rollback test in dev_change_name() Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation." TI Davinci EMAC : Fix Console Hang when bringing the interface down smsc911x: Fix Console Hang when bringing the interface down. mISDN: fix error return in HFCmulti_init() forcedeth: mac address fix r6040: fix version printing Bluetooth: Fix regression with L2CAP configuration in Basic Mode Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET Bluetooth: Set general bonding security for ACL by default r8169: Fix receive buffer length when MTU is between 1515 and 1536 can: add the missing netlink get_xstats_size callback ...
2009-11-18 14:54:45 -08:00
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING
 	  arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
 	  If unsure, say Y.

-config CAN_SJA1000
-	depends on CAN_DEV && HAS_IOMEM
-	tristate "Philips SJA1000"
-	---help---
-	  Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
-	depends on CAN_SJA1000 && ISA
-	tristate "ISA Bus based legacy SJA1000 driver"
-	---help---
-	  This driver adds legacy support for SJA1000 chips connected to
-	  the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-	depends on CAN_SJA1000
-	tristate "Generic Platform Bus based SJA1000 driver"
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the "platform bus" (Linux abstraction for directly to the
-	  processor attached devices).  Which can be found on various
-	  boards from Phytec (http://www.phytec.de) like the PCM027,
-	  PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
-	depends on CAN_SJA1000 && PPC_OF
-	tristate "Generic OF Platform Bus based SJA1000 driver"
-	---help---
-	  This driver adds support for the SJA1000 chips connected to
-	  the OpenFirmware "platform bus" found on embedded systems with
-	  OpenFirmware bindings, e.g. if you have a PowerPC based system
-	  you may want to enable this option.
-
-config CAN_EMS_PCI
-	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
-	depends on PCI && CAN_SJA1000
-	---help---
-	  This driver is for the one, two or four channel CPC-PCI,
-	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-	  (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
-	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
-	depends on USB && CAN_DEV
-	---help---
-	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
-	  from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
-	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-	depends on PCI && CAN_SJA1000
-	---help---
-	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
-	  4 channel) from Kvaser (http://www.kvaser.com).
-
 config CAN_AT91
 	tristate "Atmel AT91 onchip CAN controller"
-	depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+	depends on CAN_DEV && ARCH_AT91SAM9263
 	---help---
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.

+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -629,6 +629,11 @@ nla_put_failure:
 	return -EMSGSIZE;
 }

+static size_t can_get_xstats_size(const struct net_device *dev)
+{
+	return sizeof(struct can_device_stats);
+}
+
 static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
@@ -657,6 +662,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
 	.changelink	= can_changelink,
 	.get_size	= can_get_size,
 	.fill_info	= can_fill_info,
+	.get_xstats_size = can_get_xstats_size,
 	.fill_xstats	= can_fill_xstats,
 };

--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -0,0 +1,47 @@
+menuconfig CAN_SJA1000
+	tristate "Philips/NXP SJA1000 devices"
+	depends on CAN_DEV && HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+	tristate "ISA Bus based legacy SJA1000 driver"
+	depends on ISA
+	---help---
+	  This driver adds legacy support for SJA1000 chips connected to
+	  the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+	tristate "Generic Platform Bus based SJA1000 driver"
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the "platform bus" (Linux abstraction for directly to the
+	  processor attached devices).  Which can be found on various
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
+	  PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+	tristate "Generic OF Platform Bus based SJA1000 driver"
+	depends on PPC_OF
+	---help---
+	  This driver adds support for the SJA1000 chips connected to
+	  the OpenFirmware "platform bus" found on embedded systems with
+	  OpenFirmware bindings, e.g. if you have a PowerPC based system
+	  you may want to enable this option.
+
+config CAN_EMS_PCI
+	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+	depends on PCI
+	---help---
+	  This driver is for the one, two or four channel CPC-PCI,
+	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+	  (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+	depends on PCI
+	---help---
+	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+	  4 channel) from Kvaser (http://www.kvaser.com).
+
+endif
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -0,0 +1,10 @@
+menu "CAN USB interfaces"
+	depends on USB && CAN_DEV
+
+config CAN_EMS_USB
+	tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+	---help---
+	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+	  from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+endmenu
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -3,3 +3,5 @@
 #

 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -879,7 +879,7 @@ recycle:
 	pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
 				    PCI_DMA_FROMDEVICE);
 	(*sd->pg_chunk.p_cnt)--;
-	if (!*sd->pg_chunk.p_cnt)
+	if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
 		pci_unmap_page(adap->pdev,
 			       sd->pg_chunk.mapping,
 			       fl->alloc_size,
@@ -2088,7 +2088,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
 				    PCI_DMA_FROMDEVICE);

 	(*sd->pg_chunk.p_cnt)--;
-	if (!*sd->pg_chunk.p_cnt)
+	if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
 		pci_unmap_page(adap->pdev,
 			       sd->pg_chunk.mapping,
 			       fl->alloc_size,
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2140,9 +2140,6 @@ static int emac_poll(struct napi_struct *napi, int budget)
 	u32 status = 0;
 	u32 num_pkts = 0;

-	if (!netif_running(ndev))
-		return 0;
-
 	/* Check interrupt vectors and call packet processing */
 	status = emac_read(EMAC_MACINVECTOR);

--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5821,10 +5821,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		        dev->dev_addr);
 		dev_printk(KERN_ERR, &pci_dev->dev,
 			"Please complain to your hardware vendor. Switching to a random MAC.\n");
-		dev->dev_addr[0] = 0x00;
-		dev->dev_addr[1] = 0x00;
-		dev->dev_addr[2] = 0x6c;
-		get_random_bytes(&dev->dev_addr[3], 3);
+		random_ether_addr(dev->dev_addr);
 	}

 	dprintk(KERN_DEBUG "%s: MAC Address %pM\n",
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -263,8 +263,8 @@ struct emac_regs {


 /* EMACx_TRTR */
-#define EMAC_TRTR_SHIFT_EMAC4		27
-#define EMAC_TRTR_SHIFT			24
+#define EMAC_TRTR_SHIFT_EMAC4		24
+#define EMAC_TRTR_SHIFT		27

 /* EMAC specific TX descriptor control fields (write access) */
 #define EMAC_TX_CTRL_GFCS		0x0200
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -5994,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 	} else {
 		pci_set_master(pdev);
 		pci_restore_state(pdev);
+		pci_save_state(pdev);

 		pci_wake_from_d3(pdev, false);

--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -139,7 +139,7 @@ out:
 	return NULL;
 }

-static void __devinit mdio_gpio_bus_deinit(struct device *dev)
+static void mdio_gpio_bus_deinit(struct device *dev)
 {
 	struct mii_bus *bus = dev_get_drvdata(dev);
 	struct mdio_gpio_info *bitbang = bus->priv;
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 	}

 	/* Pull completed packets off the queue and receive them. */
-	while ((skb = ppp_mp_reconstruct(ppp)))
-		ppp_receive_nonmp_frame(ppp, skb);
+	while ((skb = ppp_mp_reconstruct(ppp))) {
+		if (pskb_may_pull(skb, 2))
+			ppp_receive_nonmp_frame(ppp, skb);
+		else {
+			++ppp->dev->stats.rx_length_errors;
+			kfree_skb(skb);
+			ppp_receive_error(ppp);
+		}
+	}

 	return;

--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	int bar = 0;
 	u16 *adrp;

-	printk(KERN_INFO "%s\n", version);
+	printk("%s\n", version);

 	err = pci_enable_device(pdev);
 	if (err)
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3243,9 +3243,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
 				  struct net_device *dev)
 {
-	unsigned int mtu = dev->mtu;
+	unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;

-	tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+	tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
 }

 static int rtl8169_open(struct net_device *dev)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp)

 		/* Restore the PCI state saved during initialization. */
 		pci_restore_state(sp->pdev);
+		pci_save_state(sp->pdev);
 		pci_read_config_word(sp->pdev, 0x2, &val16);
 		if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
 			break;
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
 	struct net_device *dev = pdata->dev;
 	int npackets = 0;

-	while (likely(netif_running(dev)) && (npackets < budget)) {
+	while (npackets < budget) {
 		unsigned int pktlength;
 		unsigned int pktwords;
 		struct sk_buff *skb;
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -2063,7 +2063,15 @@ static int gem_check_invariants(struct gem *gp)
 		mif_cfg &= ~MIF_CFG_PSELECT;
 		writel(mif_cfg, gp->regs + MIF_CFG);
 	} else {
-		gp->phy_type = phy_serialink;
+#ifdef CONFIG_SPARC
+		const char *p;
+
+		p = of_get_property(gp->of_node, "shared-pins", NULL);
+		if (p && !strcmp(p, "serdes"))
+			gp->phy_type = phy_serdes;
+		else
+#endif
+			gp->phy_type = phy_serialink;
 	}
 	if (gp->phy_type == phy_mii_mdio1 ||
 	    gp->phy_type == phy_mii_mdio0) {
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc)
 	/* configure operational mode */
 	ath5k_hw_set_opmode(ah);

-	ath5k_hw_set_mcast_filter(ah, 0, 0);
 	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
 }

--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -63,12 +63,16 @@ static const struct pci_device_id ath5k_led_devices[] = {
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
 	/* E-machines E510 (tuliom@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+	/* BenQ Joybook R55v (nowymarluk@wp.pl) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) },
 	/* Acer Extensa 5620z (nekoreeve@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
 	/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
 	/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+	/* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
 	/* HP Compaq C700 (nitrousnrg@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
 	/* IBM-specific AR5212 (all others) */
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4521,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);

-	mutex_lock(&wl->mutex);
+	/* FIXME: add locking */
 	b43_update_templates(wl);
-	mutex_unlock(&wl->mutex);

 	return 0;
 }
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
 	struct ipw2100_priv *priv;
 	struct net_device *dev;

-	dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
+	dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
 	if (!dev)
 		return NULL;
 	priv = libipw_priv(dev);
@@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 		sysfs_remove_group(&pci_dev->dev.kobj,
 				   &ipw2100_attribute_group);

-		free_ieee80211(dev, 0);
+		free_ieee80211(dev);
 		pci_set_drvdata(pci_dev, NULL);
 	}

@@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
 		if (dev->base_addr)
 			iounmap((void __iomem *)dev->base_addr);

-		free_ieee80211(dev, 0);
+		free_ieee80211(dev);
 	}

 	pci_release_regions(pci_dev);
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -104,25 +104,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH;
 static int rtap_iface = 0;     /* def: 0 -- do not create rtap interface */
 #endif

-static struct ieee80211_rate ipw2200_rates[] = {
-	{ .bitrate = 10 },
-	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-	{ .bitrate = 60 },
-	{ .bitrate = 90 },
-	{ .bitrate = 120 },
-	{ .bitrate = 180 },
-	{ .bitrate = 240 },
-	{ .bitrate = 360 },
-	{ .bitrate = 480 },
-	{ .bitrate = 540 }
-};
-
-#define ipw2200_a_rates		(ipw2200_rates + 4)
-#define ipw2200_num_a_rates	8
-#define ipw2200_bg_rates	(ipw2200_rates + 0)
-#define ipw2200_num_bg_rates	12

 #ifdef CONFIG_IPW2200_QOS
 static int qos_enable = 0;
@@ -8674,6 +8655,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option)
 *
 */

+static int ipw_wx_get_name(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu, char *extra)
+{
+	struct ipw_priv *priv = libipw_priv(dev);
+	mutex_lock(&priv->mutex);
+	if (priv->status & STATUS_RF_KILL_MASK)
+		strcpy(wrqu->name, "radio off");
+	else if (!(priv->status & STATUS_ASSOCIATED))
+		strcpy(wrqu->name, "unassociated");
+	else
+		snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
+			 ipw_modes[priv->assoc_request.ieee_mode]);
+	IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+	mutex_unlock(&priv->mutex);
+	return 0;
+}
+
 static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
 {
 	if (channel == 0) {
@@ -9973,7 +9972,7 @@ static int ipw_wx_sw_reset(struct net_device *dev,
 /* Rebase the WE IOCTLs to zero for the handler array */
 #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
 static iw_handler ipw_wx_handlers[] = {
-	IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
+	IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
 	IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
 	IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
 	IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
@@ -11417,100 +11416,16 @@ static void ipw_bg_down(struct work_struct *work)
 /* Called by register_netdev() */
 static int ipw_net_init(struct net_device *dev)
 {
-	int i, rc = 0;
 	struct ipw_priv *priv = libipw_priv(dev);
-	const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
-	struct wireless_dev *wdev = &priv->ieee->wdev;
 	mutex_lock(&priv->mutex);

 	if (ipw_up(priv)) {
-		rc = -EIO;
-		goto out;
+		mutex_unlock(&priv->mutex);
+		return -EIO;
 	}

-	memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
-
-	/* fill-out priv->ieee->bg_band */
-	if (geo->bg_channels) {
-		struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
-
-		bg_band->band = IEEE80211_BAND_2GHZ;
-		bg_band->n_channels = geo->bg_channels;
-		bg_band->channels =
-			kzalloc(geo->bg_channels *
-				sizeof(struct ieee80211_channel), GFP_KERNEL);
-		/* translate geo->bg to bg_band.channels */
-		for (i = 0; i < geo->bg_channels; i++) {
-			bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
-			bg_band->channels[i].center_freq = geo->bg[i].freq;
-			bg_band->channels[i].hw_value = geo->bg[i].channel;
-			bg_band->channels[i].max_power = geo->bg[i].max_power;
-			if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
-				bg_band->channels[i].flags |=
-					IEEE80211_CHAN_PASSIVE_SCAN;
-			if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
-				bg_band->channels[i].flags |=
-					IEEE80211_CHAN_NO_IBSS;
-			if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
-				bg_band->channels[i].flags |=
-					IEEE80211_CHAN_RADAR;
-			/* No equivalent for LIBIPW_CH_80211H_RULES,
-			   LIBIPW_CH_UNIFORM_SPREADING, or
-			   LIBIPW_CH_B_ONLY... */
-		}
-		/* point at bitrate info */
-		bg_band->bitrates = ipw2200_bg_rates;
-		bg_band->n_bitrates = ipw2200_num_bg_rates;
-
-		wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
-	}
-
-	/* fill-out priv->ieee->a_band */
-	if (geo->a_channels) {
-		struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
-
-		a_band->band = IEEE80211_BAND_5GHZ;
-		a_band->n_channels = geo->a_channels;
-		a_band->channels =
-			kzalloc(geo->a_channels *
-				sizeof(struct ieee80211_channel), GFP_KERNEL);
-		/* translate geo->bg to a_band.channels */
-		for (i = 0; i < geo->a_channels; i++) {
-			a_band->channels[i].band = IEEE80211_BAND_2GHZ;
-			a_band->channels[i].center_freq = geo->a[i].freq;
-			a_band->channels[i].hw_value = geo->a[i].channel;
-			a_band->channels[i].max_power = geo->a[i].max_power;
-			if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
-				a_band->channels[i].flags |=
-					IEEE80211_CHAN_PASSIVE_SCAN;
-			if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
-				a_band->channels[i].flags |=
-					IEEE80211_CHAN_NO_IBSS;
-			if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
-				a_band->channels[i].flags |=
-					IEEE80211_CHAN_RADAR;
-			/* No equivalent for LIBIPW_CH_80211H_RULES,
-			   LIBIPW_CH_UNIFORM_SPREADING, or
-			   LIBIPW_CH_B_ONLY... */
-		}
-		/* point at bitrate info */
-		a_band->bitrates = ipw2200_a_rates;
-		a_band->n_bitrates = ipw2200_num_a_rates;
-
-		wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
-	}
-
-	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-
-	/* With that information in place, we can now register the wiphy... */
-	if (wiphy_register(wdev->wiphy)) {
-		rc = -EIO;
-		goto out;
-	}
-
-out:
 	mutex_unlock(&priv->mutex);
-	return rc;
+	return 0;
 }

 /* PCI driver stuff */
@@ -11641,7 +11556,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
 	if (priv->prom_net_dev)
 		return -EPERM;

-	priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
+	priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
 	if (priv->prom_net_dev == NULL)
 		return -ENOMEM;

@@ -11660,7 +11575,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)

 	rc = register_netdev(priv->prom_net_dev);
 	if (rc) {
-		free_ieee80211(priv->prom_net_dev, 1);
+		free_ieee80211(priv->prom_net_dev);
 		priv->prom_net_dev = NULL;
 		return rc;
 	}
@@ -11674,7 +11589,7 @@ static void ipw_prom_free(struct ipw_priv *priv)
 		return;

 	unregister_netdev(priv->prom_net_dev);
-	free_ieee80211(priv->prom_net_dev, 1);
+	free_ieee80211(priv->prom_net_dev);

 	priv->prom_net_dev = NULL;
 }
@@ -11702,7 +11617,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 	struct ipw_priv *priv;
 	int i;

-	net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
+	net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
 	if (net_dev == NULL) {
 		err = -ENOMEM;
 		goto out;
@@ -11850,7 +11765,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
      out_free_ieee80211:
-	free_ieee80211(priv->net_dev, 0);
+	free_ieee80211(priv->net_dev);
      out:
 	return err;
 }
@@ -11917,7 +11832,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
-	free_ieee80211(priv->net_dev, 0);
+	free_ieee80211(priv->net_dev);
 	free_firmware();
 }

--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -31,7 +31,6 @@
 #include <linux/ieee80211.h>

 #include <net/lib80211.h>
-#include <net/cfg80211.h>

 #define LIBIPW_VERSION "git-1.1.13"

@@ -784,15 +783,12 @@ struct libipw_geo {

 struct libipw_device {
 	struct net_device *dev;
-	struct wireless_dev wdev;
 	struct libipw_security sec;

 	/* Bookkeeping structures */
 	struct libipw_stats ieee_stats;

 	struct libipw_geo geo;
-	struct ieee80211_supported_band bg_band;
-	struct ieee80211_supported_band a_band;

 	/* Probe / Beacon management */
 	struct list_head network_free_list;
@@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate)
 }

 /* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev, int monitor);
-extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
 extern int libipw_change_mtu(struct net_device *dev, int new_mtu);

 extern void libipw_networks_age(struct libipw_device *ieee,
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");

-struct cfg80211_ops libipw_config_ops = { };
-void *libipw_wiphy_privid = &libipw_wiphy_privid;
-
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
 	if (ieee->networks)
@@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu)
 }
 EXPORT_SYMBOL(libipw_change_mtu);

-struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
+struct net_device *alloc_ieee80211(int sizeof_priv)
 {
 	struct libipw_device *ieee;
 	struct net_device *dev;
@@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)

 	ieee->dev = dev;

-	if (!monitor) {
-		ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
-		if (!ieee->wdev.wiphy) {
-			LIBIPW_ERROR("Unable to allocate wiphy.\n");
-			goto failed_free_netdev;
-		}
-
-		ieee->dev->ieee80211_ptr = &ieee->wdev;
-		ieee->wdev.iftype = NL80211_IFTYPE_STATION;
-
-		/* Fill-out wiphy structure bits we know...  Not enough info
-		   here to call set_wiphy_dev or set MAC address or channel info
-		   -- have to do that in ->ndo_init... */
-		ieee->wdev.wiphy->privid = libipw_wiphy_privid;
-
-		ieee->wdev.wiphy->max_scan_ssids = 1;
-		ieee->wdev.wiphy->max_scan_ie_len = 0;
-		ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
-						| BIT(NL80211_IFTYPE_ADHOC);
-	}
-
 	err = libipw_networks_allocate(ieee);
 	if (err) {
 		LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
-		goto failed_free_wiphy;
+		goto failed_free_netdev;
 	}
 	libipw_networks_initialize(ieee);

@@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)

 	return dev;

-failed_free_wiphy:
-	if (!monitor)
-		wiphy_free(ieee->wdev.wiphy);
 failed_free_netdev:
 	free_netdev(dev);
 failed:
 	return NULL;
 }

-void free_ieee80211(struct net_device *dev, int monitor)
+void free_ieee80211(struct net_device *dev)
 {
 	struct libipw_device *ieee = netdev_priv(dev);

 	lib80211_crypt_info_free(&ieee->crypt_info);

 	libipw_networks_free(ieee);
-
-	/* free cfg80211 resources */
-	if (!monitor) {
-		wiphy_unregister(ieee->wdev.wiphy);
-		kfree(ieee->a_band.channels);
-		kfree(ieee->bg_band.channels);
-		wiphy_free(ieee->wdev.wiphy);
-	}
-
 	free_netdev(dev);
 }

--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
 	.shadow_ram_support = false,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

 /*
@@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

 struct iwl_cfg iwl6050_3agn_cfg = {
@@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = {
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.use_rts_for_ht = true, /* use rts/cts protection */
 };

 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
 	else if (tid == IWL_AGG_ALL_TID)
 		for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
 			rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+	if (priv->cfg->use_rts_for_ht) {
+		/*
+		 * switch to RTS/CTS if it is the prefer protection method
+		 * for HT traffic
+		 */
+		IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n");
+		priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
+		iwlcore_commit_rxon(priv);
+	}
 }

 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -116,9 +116,6 @@ int iwl_commit_rxon(struct iwl_priv *priv)

 	/* always get timestamp with Rx frame */
 	priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
-	/* allow CTS-to-self if possible. this is relevant only for
-	 * 5000, but will not damage 4965 */
-	priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;

 	ret = iwl_check_rxon_cmd(priv);
 	if (ret) {
@@ -218,6 +215,13 @@ int iwl_commit_rxon(struct iwl_priv *priv)
 					"Could not send WEP static key.\n");
 		}

+		/*
+		 * allow CTS-to-self if possible for new association.
+		 * this is relevant only for 5000 series and up,
+		 * but will not damage 4965
+		 */
+		priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
 		/* Apply the new configuration
 		 * RXON assoc doesn't clear the station table in uCode,
 		 */
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -213,6 +213,7 @@ struct iwl_mod_params {
 * @pa_type: used by 6000 series only to identify the type of Power Amplifier
 * @max_ll_items: max number of OTP blocks
 * @shadow_ram_support: shadow support for OTP memory
+ * @use_rts_for_ht: use rts/cts protection for HT traffic
 *
 * We enable the driver to be backward compatible wrt API version. The
 * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -255,6 +256,7 @@ struct iwl_cfg {
 	const bool shadow_ram_support;
 	const bool ht_greenfield_support;
 	const bool broken_powersave;
+	bool use_rts_for_ht;
 };

 /***************************
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -169,16 +169,19 @@ static int lbs_ethtool_set_wol(struct net_device *dev,
 	struct lbs_private *priv = dev->ml_priv;
 	uint32_t criteria = 0;

-	if (priv->wol_criteria == 0xffffffff && wol->wolopts)
-		return -EOPNOTSUPP;
-
 	if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY))
 		return -EOPNOTSUPP;

-	if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA;
-	if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA;
-	if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA;
-	if (wol->wolopts & WAKE_PHY)   criteria |= EHS_WAKE_ON_MAC_EVENT;
+	if (wol->wolopts & WAKE_UCAST)
+		criteria |= EHS_WAKE_ON_UNICAST_DATA;
+	if (wol->wolopts & WAKE_MCAST)
+		criteria |= EHS_WAKE_ON_MULTICAST_DATA;
+	if (wol->wolopts & WAKE_BCAST)
+		criteria |= EHS_WAKE_ON_BROADCAST_DATA;
+	if (wol->wolopts & WAKE_PHY)
+		criteria |= EHS_WAKE_ON_MAC_EVENT;
+	if (wol->wolopts == 0)
+		criteria |= EHS_REMOVE_WAKEUP;

 	return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
 }
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~";
 static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
-	u8 buf[4];
+	u8 *buf;
 	int ret;

-	memcpy(&buf, p54u_romboot_3887, sizeof(buf));
+	buf = kmalloc(4, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	memcpy(buf, p54u_romboot_3887, 4);
 	ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
-			    buf, sizeof(buf));
+			    buf, 4);
+	kfree(buf);
 	if (ret)
 		dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
 			"boot ROM (%d)!\n", ret);
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -18,6 +18,7 @@
 #include <net/mac80211.h>

 #include "rtl8187.h"
+#include "rtl8187_rfkill.h"

 static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
 {