ARM: vexpress: Add CLCD Device Tree properties

... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/vexpress-v2p-ca9.dts

@@ -70,9 +70,40 @@
 	clcd@10020000 {
 		compatible = "arm,pl111", "arm,primecell";
 		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
 		interrupts = <0 44 4>;
 		clocks = <&oscclk1>, <&oscclk2>;
 		clock-names = "clcdclk", "apb_pclk";
+		max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+		port {
+			clcd_pads: endpoint {
+				remote-endpoint = <&clcd_panel>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+
+		panel {
+			compatible = "panel-dpi";
+
+			port {
+				clcd_panel: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			panel-timing {
+				clock-frequency = <63500127>;
+				hactive = <1024>;
+				hback-porch = <152>;
+				hfront-porch = <48>;
+				hsync-len = <104>;
+				vactive = <768>;
+				vback-porch = <23>;
+				vfront-porch = <3>;
+				vsync-len = <4>;
+			};
+		};
 	};
 
 	memory-controller@100e0000 {