Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "CrOS EC:
   - Add EC host command support using rpmsg
   - Add new CrOS USB PD logging driver
   - Transfer spi messages at high priority
   - Add support to trace CrOS EC commands
   - Minor fixes and cleanups in protocol and debugfs

  Wilco EC:
   - Standardize Wilco EC mailbox interface
   - Add h1_gpio status to debugfs"

* tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_proto: Add trace event to trace EC commands
  platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper
  platform/chrome: cros_ec: Add EC host command support using rpmsg
  platform/chrome: wilco_ec: Add h1_gpio status to debugfs
  platform/chrome: wilco_ec: Standardize mailbox interface
  platform/chrome: cros_ec_proto: check for NULL transfer function
  platform/chrome: Add CrOS USB PD logging driver
  platform/chrome: cros_ec_spi: Transfer messages at high priority
  platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions
  platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported

Documentation/ABI/testing/debugfs-wilco-ec

@@ -1,23 +1,46 @@
+What:		/sys/kernel/debug/wilco_ec/h1_gpio
+Date:		April 2019
+KernelVersion:	5.2
+Description:
+		As part of Chrome OS's FAFT (Fully Automated Firmware Testing)
+		tests, we need to ensure that the H1 chip is properly setting
+		some GPIO lines. The h1_gpio attribute exposes the state
+		of the lines:
+		- ENTRY_TO_FACT_MODE in BIT(0)
+		- SPI_CHROME_SEL in BIT(1)
+
+		Output will formatted with "0x%02x\n".
+
 What:		/sys/kernel/debug/wilco_ec/raw
 Date:		January 2019
 KernelVersion:	5.1
 Description:
 		Write and read raw mailbox commands to the EC.
 
-		For writing:
-		Bytes 0-1 indicate the message type:
-			00 F0 = Execute Legacy Command
-			00 F2 = Read/Write NVRAM Property
-		Byte 2 provides the command code
-		Bytes 3+ consist of the data passed in the request
+		You can write a hexadecimal sentence to raw, and that series of
+		bytes will be sent to the EC. Then, you can read the bytes of
+		response by reading from raw.
 
-		At least three bytes are required, for the msg type and command,
-		with additional bytes optional for additional data.
+		For writing, bytes 0-1 indicate the message type, one of enum
+		wilco_ec_msg_type. Byte 2+ consist of the data passed in the
+		request, starting at MBOX[0]
+
+		At least three bytes are required for writing, two for the type
+		and at least a single byte of data. Only the first
+		EC_MAILBOX_DATA_SIZE bytes of MBOX will be used.
 
 		Example:
 		// Request EC info type 3 (EC firmware build date)
-		$ echo 00 f0 38 00 03 00 > raw
+		// Corresponds with sending type 0x00f0 with
+		// MBOX = [38, 00, 03, 00]
+		$ echo 00 f0 38 00 03 00 > /sys/kernel/debug/wilco_ec/raw
 		// View the result. The decoded ASCII result "12/21/18" is
 		// included after the raw hex.
-		$ cat raw
-		00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  .12/21/18.8...
+		// Corresponds with MBOX = [00, 00, 31, 32, 2f, 32, 31, 38, ...]
+		$ cat /sys/kernel/debug/wilco_ec/raw
+		00 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  ..12/21/18.8...
+
+		Note that the first 32 bytes of the received MBOX[] will be
+		printed, even if some of the data is junk. It is up to you to
+		know how many of the first bytes of data are the actual
+		response.