arm/dts: OMAP3+: Add mpu, dsp and iva nodes

Add nodes for devices used by PM code (mpu, dsp, iva).

Add a cpus node as well as recommended in the DT spec.

Remove mpu, dsp, iva devices init if is populated.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Kevin Hilman <khilman@ti.com>

Documentation/devicetree/bindings/arm/omap/dsp.txt

@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};

Documentation/devicetree/bindings/arm/omap/iva.txt

@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};