Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
This commit is contained in:
Linus Torvalds
@@ -0,0 +1,136 @@
|
||||
* Device tree bindings for Atmel EBI
|
||||
|
||||
The External Bus Interface (EBI) controller is a bus where you can connect
|
||||
asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs).
|
||||
The EBI provides a glue-less interface to asynchronous memories through the SMC
|
||||
(Static Memory Controller).
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "atmel,at91sam9260-ebi"
|
||||
"atmel,at91sam9261-ebi"
|
||||
"atmel,at91sam9263-ebi0"
|
||||
"atmel,at91sam9263-ebi1"
|
||||
"atmel,at91sam9rl-ebi"
|
||||
"atmel,at91sam9g45-ebi"
|
||||
"atmel,at91sam9x5-ebi"
|
||||
"atmel,sama5d3-ebi"
|
||||
|
||||
- reg: Contains offset/length value for EBI memory mapping.
|
||||
This property might contain several entries if the EBI
|
||||
memory range is not contiguous
|
||||
|
||||
- #address-cells: Must be 2.
|
||||
The first cell encodes the CS.
|
||||
The second cell encode the offset into the CS memory
|
||||
range.
|
||||
|
||||
- #size-cells: Must be set to 1.
|
||||
|
||||
- ranges: Encodes CS to memory region association.
|
||||
|
||||
- clocks: Clock feeding the EBI controller.
|
||||
See clock-bindings.txt
|
||||
|
||||
Children device nodes are representing device connected to the EBI bus.
|
||||
|
||||
Required device node properties:
|
||||
|
||||
- reg: Contains the chip-select id, the offset and the length
|
||||
of the memory region requested by the device.
|
||||
|
||||
EBI bus configuration will be defined directly in the device subnode.
|
||||
|
||||
Optional EBI/SMC properties:
|
||||
|
||||
- atmel,smc-bus-width: width of the asynchronous device's data bus
|
||||
8, 16 or 32.
|
||||
Default to 8 when undefined.
|
||||
|
||||
- atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet).
|
||||
Default to "select" when undefined.
|
||||
|
||||
- atmel,smc-read-mode "nrd" or "ncs".
|
||||
Default to "ncs" when undefined.
|
||||
|
||||
- atmel,smc-write-mode "nwe" or "ncs".
|
||||
Default to "ncs" when undefined.
|
||||
|
||||
- atmel,smc-exnw-mode "disabled", "frozen" or "ready".
|
||||
Default to "disabled" when undefined.
|
||||
|
||||
- atmel,smc-page-mode enable page mode if present. The provided value
|
||||
defines the page size (supported values: 4, 8,
|
||||
16 and 32).
|
||||
|
||||
- atmel,smc-tdf-mode: "normal" or "optimized". When set to
|
||||
"optimized" the data float time is optimized
|
||||
depending on the next device being accessed
|
||||
(next device setup time is subtracted to the
|
||||
current device data float time).
|
||||
Default to "normal" when undefined.
|
||||
|
||||
If at least one atmel,smc- property is defined the following SMC timing
|
||||
properties become mandatory. In the other hand, if none of the atmel,smc-
|
||||
properties are specified, we assume that the EBI bus configuration will be
|
||||
handled by the sub-device driver, and none of those properties should be
|
||||
defined.
|
||||
|
||||
All the timings are expressed in nanoseconds (see Atmel datasheet for a full
|
||||
description).
|
||||
|
||||
- atmel,smc-ncs-rd-setup-ns
|
||||
- atmel,smc-nrd-setup-ns
|
||||
- atmel,smc-ncs-wr-setup-ns
|
||||
- atmel,smc-nwe-setup-ns
|
||||
- atmel,smc-ncs-rd-pulse-ns
|
||||
- atmel,smc-nrd-pulse-ns
|
||||
- atmel,smc-ncs-wr-pulse-ns
|
||||
- atmel,smc-nwe-pulse-ns
|
||||
- atmel,smc-nwe-cycle-ns
|
||||
- atmel,smc-nrd-cycle-ns
|
||||
- atmel,smc-tdf-ns
|
||||
|
||||
Example:
|
||||
|
||||
ebi: ebi@10000000 {
|
||||
compatible = "atmel,sama5d3-ebi";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
atmel,smc = <&hsmc>;
|
||||
atmel,matrix = <&matrix>;
|
||||
reg = <0x10000000 0x10000000
|
||||
0x40000000 0x30000000>;
|
||||
ranges = <0x0 0x0 0x10000000 0x10000000
|
||||
0x1 0x0 0x40000000 0x10000000
|
||||
0x2 0x0 0x50000000 0x10000000
|
||||
0x3 0x0 0x60000000 0x10000000>;
|
||||
clocks = <&mck>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ebi_addr>;
|
||||
|
||||
nor: flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x0 0x0 0x1000000>;
|
||||
bank-width = <2>;
|
||||
|
||||
atmel,smc-read-mode = "nrd";
|
||||
atmel,smc-write-mode = "nwe";
|
||||
atmel,smc-bus-width = <16>;
|
||||
atmel,smc-ncs-rd-setup-ns = <0>;
|
||||
atmel,smc-ncs-wr-setup-ns = <0>;
|
||||
atmel,smc-nwe-setup-ns = <8>;
|
||||
atmel,smc-nrd-setup-ns = <16>;
|
||||
atmel,smc-ncs-rd-pulse-ns = <84>;
|
||||
atmel,smc-ncs-wr-pulse-ns = <84>;
|
||||
atmel,smc-nrd-pulse-ns = <76>;
|
||||
atmel,smc-nwe-pulse-ns = <76>;
|
||||
atmel,smc-nrd-cycle-ns = <107>;
|
||||
atmel,smc-nwe-cycle-ns = <84>;
|
||||
atmel,smc-tdf-ns = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user