Bluetooth: btmrvl: use cal-data from device-tree instead of conf file

Some ARM versions of Chromebook need to download a new calibration
data from host driver to firmware. They do have EEPROM but still
need a piece of new calibration data in test mode.

The cal-data is platform dependent. It's simpler and more feasible
to use device tree based cal-data instead of configuration file
based cal-data.

This patch remove configuration file based cal-data downloading
and replace it using cal-data from device tree.

When CONFIG_OF is not selected, or the specific property is not
present in the device tree, the calibration downloading will not
happen.

Cc: Mike Frysinger <vapier@chromium.org>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Hyuckjoo Lee <hyuckjoo.lee@samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/btmrvl_sdio.c

@@ -18,6 +18,7 @@
  * this warranty disclaimer.
  **/
 
+#include <linux/firmware.h>
 #include <linux/slab.h>
 
 #include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
-	.cal_data	= "mrvl/sd8797_caldata.conf",
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8897_uapsta.bin",
-	.cal_data	= NULL,
 	.reg		= &btmrvl_reg_88xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 		struct btmrvl_sdio_device *data = (void *) id->driver_data;
 		card->helper = data->helper;
 		card->firmware = data->firmware;
-		card->cal_data = data->cal_data;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
 	}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	}
 
 	card->priv = priv;
-	priv->btmrvl_dev.dev = &card->func->dev;
-	priv->btmrvl_dev.cal_data = card->cal_data;
 
 	/* Initialize the interface specific function pointers */
 	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
 MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
 MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");