xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Bifurcation 0
Code Tickets Demandes d'ajout Actions Paquets Projets Publications Wiki Activité

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Parcourir la source 
Pull ARM SoC fixes from Olof Johansson:
 "Our first batch of fixes this release cycle, unfortunately a bit
  noisier than usual. Two major groups stand out:

   - Some pinctril dts/dtsi changes for stm32 due to a new driver being
     merged during the merge window, and this aligns the DT contents
     between the old format and the new. This could arguably be moved to
     the next merge window but it also seemed relatively harmless to
     include now.

   - Amlogic/meson had driver changes merged that required devicetree
     changes to avoid functional/performance regressions. I've already
     asked them to be more careful about this going forward, and making
     sure drivers are compatible with older DTs when they make these
     kind of changes. The platform is actively being upstreamed so
     there's a few things in flight, we've seen this happen before and
     sometimes it's hard to catch in time.

  Besides that there is the usual mix of minor fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: dts: stm32: use right pinctrl compatible for stm32f469
  ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
  ARM: defconfig: update Gemini defconfig
  ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
  arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
  reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
  ARM: dts: da850-evm: add serial and ethernet aliases
  ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  ARM: dts: am33xx: Add spi alias to match SOC schematics
  ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
  arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
  arm64: dt marvell: Fix AP806 system controller size
  MAINTAINERS: add Macchiatobin maintainers entry
  ARC: reset: remove the misleading v1 suffix all over
  ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
  ARC: reset: Only build on archs that have IOMEM
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ...
Cette révision appartient à :
Linus Torvalds
2017-10-04 17:16:05 -07:00
Parent e0a8631287 08f8c8808c
révision 42b76d0e6b
44 fichiers modifiés avec 810 ajouts et 503 suppressions
Télécharger le Fichier Patch Télécharger le Fichier des Différences Développer tous les fichiers Réduire tous les fichiers

2
arch/arm/boot/dts/am33xx.dtsi
Voir le fichier

@@ -36,6 +36,8 @@
phy1 = &usb1_phy;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
spi0 = &spi0;
spi1 = &spi1;
};
cpus {

6
arch/arm/boot/dts/am43x-epos-evm.dts
Voir le fichier

@@ -388,6 +388,7 @@
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
slaves = <1>;
};
&davinci_mdio {
@@ -402,11 +403,6 @@
phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
};
&phy_sel {
rmii-clock-ext;
};

19
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
Voir le fichier

@@ -67,7 +67,10 @@
usb1: ohci@00400000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
&pioA PIN_PA27 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
@@ -120,7 +123,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus2_uart>;
atmel,use-dma-rx;
atmel-use-dma-tx;
atmel,use-dma-tx;
status = "okay";
};
@@ -178,7 +181,7 @@
uart4: serial@fc00c000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-name = "default";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_uart>;
status = "okay";
};
@@ -330,7 +333,7 @@
};
pinctrl_led_gpio_default: led_gpio_default {
pinmux = <PIN_PA27__GPIO>,
pinmux = <PIN_PA10__GPIO>,
<PIN_PB1__GPIO>,
<PIN_PA31__GPIO>;
bias-pull-up;
@@ -396,7 +399,7 @@
};
pinctrl_usb_default: usb_default {
pinmux = <PIN_PA10__GPIO>,
pinmux = <PIN_PA27__GPIO>,
<PIN_PD19__GPIO>;
bias-disable;
};
@@ -520,17 +523,17 @@
red {
label = "red";
gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
};
green {
label = "green";
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
};
blue {
label = "blue";
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};

7
arch/arm/boot/dts/da850-evm.dts
Voir le fichier

@@ -15,6 +15,13 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
ethernet0 = &eth0;
};
soc@1c00000 {
pmx_core: pinmux@14120 {
status = "okay";

2
arch/arm/boot/dts/dra7xx-clocks.dtsi
Voir le fichier

@@ -1817,6 +1817,8 @@
clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
ti,bit-shift = <24>;
reg = <0x1868>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&abe_24m_fclk>;
};
mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {

11
arch/arm/boot/dts/omap3-n900.dts
Voir le fichier

@@ -144,15 +144,6 @@
io-channel-names = "temp", "bsi", "vbat";
};
rear_camera: camera@0 {
compatible = "linux,camera";
module {
model = "TCM8341MD";
sensor = <&cam1>;
};
};
pwm9: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
@@ -189,10 +180,8 @@
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
clock-inv = <0>;
/* Select strobe = <1> for back camera, <0> for front camera */
strobe = <1>;
crc = <0>;
};
};
};

5
arch/arm/boot/dts/stm32429i-eval.dts
Voir le fichier

@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -202,10 +203,8 @@
stmpe1600: stmpe1600@42 {
compatible = "st,stmpe1600";
reg = <0x42>;
irq-gpio = <&gpioi 8 0>;
irq-trigger = <3>;
interrupts = <8 3>;
interrupt-parent = <&exti>;
interrupt-parent = <&gpioi>;
interrupt-controller;
wakeup-source;

343
arch/arm/boot/dts/stm32f4-pinctrl.dtsi Fichier normal
Voir le fichier

@@ -0,0 +1,343 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
/ {
soc {
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
<STM32F429_PA11_FUNC_OTG_FS_DM>,
<STM32F429_PA12_FUNC_OTG_FS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
<STM32F429_PB14_FUNC_OTG_HS_DM>,
<STM32F429_PB15_FUNC_OTG_HS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
<STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
<STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
<STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
<STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
<STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
<STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
<STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
<STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
<STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
<STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
<STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F429_PC2_FUNC_ETH_MII_TXD2>,
<STM32F429_PB8_FUNC_ETH_MII_TXD3>,
<STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
<STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F429_PA2_FUNC_ETH_MDIO>,
<STM32F429_PC1_FUNC_ETH_MDC>,
<STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
<STM32F429_PH6_FUNC_ETH_MII_RXD2>,
<STM32F429_PH7_FUNC_ETH_MII_RXD3>;
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
pinmux = <STM32F429_PF10_FUNC_ANALOG>;
};
};
pwm1_pins: pwm@1 {
pins {
pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
<STM32F429_PB13_FUNC_TIM1_CH1N>,
<STM32F429_PB12_FUNC_TIM1_BKIN>;
};
};
pwm3_pins: pwm@3 {
pins {
pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
<STM32F429_PB5_FUNC_TIM3_CH2>;
};
};
i2c1_pins: i2c1@0 {
pins {
pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
<STM32F429_PB6_FUNC_I2C1_SCL>;
bias-disable;
drive-open-drain;
slew-rate = <3>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
<STM32F429_PI13_FUNC_LCD_VSYNC>,
<STM32F429_PI14_FUNC_LCD_CLK>,
<STM32F429_PI15_FUNC_LCD_R0>,
<STM32F429_PJ0_FUNC_LCD_R1>,
<STM32F429_PJ1_FUNC_LCD_R2>,
<STM32F429_PJ2_FUNC_LCD_R3>,
<STM32F429_PJ3_FUNC_LCD_R4>,
<STM32F429_PJ4_FUNC_LCD_R5>,
<STM32F429_PJ5_FUNC_LCD_R6>,
<STM32F429_PJ6_FUNC_LCD_R7>,
<STM32F429_PJ7_FUNC_LCD_G0>,
<STM32F429_PJ8_FUNC_LCD_G1>,
<STM32F429_PJ9_FUNC_LCD_G2>,
<STM32F429_PJ10_FUNC_LCD_G3>,
<STM32F429_PJ11_FUNC_LCD_G4>,
<STM32F429_PJ12_FUNC_LCD_B0>,
<STM32F429_PJ13_FUNC_LCD_B1>,
<STM32F429_PJ14_FUNC_LCD_B2>,
<STM32F429_PJ15_FUNC_LCD_B3>,
<STM32F429_PK0_FUNC_LCD_G5>,
<STM32F429_PK1_FUNC_LCD_G6>,
<STM32F429_PK2_FUNC_LCD_G7>,
<STM32F429_PK3_FUNC_LCD_B4>,
<STM32F429_PK4_FUNC_LCD_B5>,
<STM32F429_PK5_FUNC_LCD_B6>,
<STM32F429_PK6_FUNC_LCD_B7>,
<STM32F429_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
<STM32F429_PB7_FUNC_DCMI_VSYNC>,
<STM32F429_PA6_FUNC_DCMI_PIXCLK>,
<STM32F429_PC6_FUNC_DCMI_D0>,
<STM32F429_PC7_FUNC_DCMI_D1>,
<STM32F429_PC8_FUNC_DCMI_D2>,
<STM32F429_PC9_FUNC_DCMI_D3>,
<STM32F429_PC11_FUNC_DCMI_D4>,
<STM32F429_PD3_FUNC_DCMI_D5>,
<STM32F429_PB8_FUNC_DCMI_D6>,
<STM32F429_PE6_FUNC_DCMI_D7>,
<STM32F429_PC10_FUNC_DCMI_D8>,
<STM32F429_PC12_FUNC_DCMI_D9>,
<STM32F429_PD6_FUNC_DCMI_D10>,
<STM32F429_PD2_FUNC_DCMI_D11>;
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
};
};
};

1
arch/arm/boot/dts/stm32f429-disco.dts
Voir le fichier

@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
/ {

95
arch/arm/boot/dts/stm32f429-pinctrl.dtsi Fichier normal
Voir le fichier

@@ -0,0 +1,95 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "stm32f4-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller {
compatible = "st,stm32f429-pinctrl";
gpioa: gpio@40020000 {
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@40020400 {
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@40020800 {
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@40020c00 {
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@40021000 {
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@40021400 {
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@40021800 {
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@40021c00 {
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@40022000 {
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@40022400 {
gpio-ranges = <&pinctrl 0 144 16>;
};
gpiok: gpio@40022800 {
gpio-ranges = <&pinctrl 0 160 8>;
};
};
};
};

297
arch/arm/boot/dts/stm32f429.dtsi
Voir le fichier

@@ -47,7 +47,6 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
@@ -591,302 +590,6 @@
status = "disabled";
};
pinctrl: pin-controller {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32f429-pinctrl";
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
bias-disable;
};
};
usart3_pins_a: usart3@0 {
pins1 {
pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
bias-disable;
};
};
usbotg_fs_pins_a: usbotg_fs@0 {
pins {
pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
<STM32F429_PA11_FUNC_OTG_FS_DM>,
<STM32F429_PA12_FUNC_OTG_FS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_fs_pins_b: usbotg_fs@1 {
pins {
pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
<STM32F429_PB14_FUNC_OTG_HS_DM>,
<STM32F429_PB15_FUNC_OTG_HS_DP>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
usbotg_hs_pins_a: usbotg_hs@0 {
pins {
pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
<STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
<STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
<STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
<STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
<STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
<STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
<STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
<STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
<STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
<STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
<STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F429_PC2_FUNC_ETH_MII_TXD2>,
<STM32F429_PB8_FUNC_ETH_MII_TXD3>,
<STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
<STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F429_PA2_FUNC_ETH_MDIO>,
<STM32F429_PC1_FUNC_ETH_MDC>,
<STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
<STM32F429_PH6_FUNC_ETH_MII_RXD2>,
<STM32F429_PH7_FUNC_ETH_MII_RXD3>;
slew-rate = <2>;
};
};
adc3_in8_pin: adc@200 {
pins {
pinmux = <STM32F429_PF10_FUNC_ANALOG>;
};
};
pwm1_pins: pwm@1 {
pins {
pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
<STM32F429_PB13_FUNC_TIM1_CH1N>,
<STM32F429_PB12_FUNC_TIM1_BKIN>;
};
};
pwm3_pins: pwm@3 {
pins {
pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
<STM32F429_PB5_FUNC_TIM3_CH2>;
};
};
i2c1_pins: i2c1@0 {
pins {
pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
<STM32F429_PB6_FUNC_I2C1_SCL>;
bias-disable;
drive-open-drain;
slew-rate = <3>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
<STM32F429_PI13_FUNC_LCD_VSYNC>,
<STM32F429_PI14_FUNC_LCD_CLK>,
<STM32F429_PI15_FUNC_LCD_R0>,
<STM32F429_PJ0_FUNC_LCD_R1>,
<STM32F429_PJ1_FUNC_LCD_R2>,
<STM32F429_PJ2_FUNC_LCD_R3>,
<STM32F429_PJ3_FUNC_LCD_R4>,
<STM32F429_PJ4_FUNC_LCD_R5>,
<STM32F429_PJ5_FUNC_LCD_R6>,
<STM32F429_PJ6_FUNC_LCD_R7>,
<STM32F429_PJ7_FUNC_LCD_G0>,
<STM32F429_PJ8_FUNC_LCD_G1>,
<STM32F429_PJ9_FUNC_LCD_G2>,
<STM32F429_PJ10_FUNC_LCD_G3>,
<STM32F429_PJ11_FUNC_LCD_G4>,
<STM32F429_PJ12_FUNC_LCD_B0>,
<STM32F429_PJ13_FUNC_LCD_B1>,
<STM32F429_PJ14_FUNC_LCD_B2>,
<STM32F429_PJ15_FUNC_LCD_B3>,
<STM32F429_PK0_FUNC_LCD_G5>,
<STM32F429_PK1_FUNC_LCD_G6>,
<STM32F429_PK2_FUNC_LCD_G7>,
<STM32F429_PK3_FUNC_LCD_B4>,
<STM32F429_PK4_FUNC_LCD_B5>,
<STM32F429_PK5_FUNC_LCD_B6>,
<STM32F429_PK6_FUNC_LCD_B7>,
<STM32F429_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
dcmi_pins: dcmi@0 {
pins {
pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
<STM32F429_PB7_FUNC_DCMI_VSYNC>,
<STM32F429_PA6_FUNC_DCMI_PIXCLK>,
<STM32F429_PC6_FUNC_DCMI_D0>,
<STM32F429_PC7_FUNC_DCMI_D1>,
<STM32F429_PC8_FUNC_DCMI_D2>,
<STM32F429_PC9_FUNC_DCMI_D3>,
<STM32F429_PC11_FUNC_DCMI_D4>,
<STM32F429_PD3_FUNC_DCMI_D5>,
<STM32F429_PB8_FUNC_DCMI_D6>,
<STM32F429_PE6_FUNC_DCMI_D7>,
<STM32F429_PC10_FUNC_DCMI_D8>,
<STM32F429_PC12_FUNC_DCMI_D9>,
<STM32F429_PD6_FUNC_DCMI_D10>,
<STM32F429_PD2_FUNC_DCMI_D11>;
bias-disable;
drive-push-pull;
slew-rate = <3>;
};
};
};
crc: crc@40023000 {
compatible = "st,stm32f4-crc";
reg = <0x40023000 0x400>;

1
arch/arm/boot/dts/stm32f469-disco.dts
Voir le fichier

@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
#include "stm32f469-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32F469i-DISCO board";

96
arch/arm/boot/dts/stm32f469-pinctrl.dtsi Fichier normal
Voir le fichier

@@ -0,0 +1,96 @@
/*
* Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "stm32f4-pinctrl.dtsi"
/ {
soc {
pinctrl: pin-controller {
compatible = "st,stm32f469-pinctrl";
gpioa: gpio@40020000 {
gpio-ranges = <&pinctrl 0 0 16>;
};
gpiob: gpio@40020400 {
gpio-ranges = <&pinctrl 0 16 16>;
};
gpioc: gpio@40020800 {
gpio-ranges = <&pinctrl 0 32 16>;
};
gpiod: gpio@40020c00 {
gpio-ranges = <&pinctrl 0 48 16>;
};
gpioe: gpio@40021000 {
gpio-ranges = <&pinctrl 0 64 16>;
};
gpiof: gpio@40021400 {
gpio-ranges = <&pinctrl 0 80 16>;
};
gpiog: gpio@40021800 {
gpio-ranges = <&pinctrl 0 96 16>;
};
gpioh: gpio@40021c00 {
gpio-ranges = <&pinctrl 0 112 16>;
};
gpioi: gpio@40022000 {
gpio-ranges = <&pinctrl 0 128 16>;
};
gpioj: gpio@40022400 {
gpio-ranges = <&pinctrl 0 144 6>,
<&pinctrl 12 156 4>;
};
gpiok: gpio@40022800 {
gpio-ranges = <&pinctrl 3 163 5>;
};
};
};
};

3
arch/arm/configs/gemini_defconfig
Voir le fichier

@@ -32,6 +32,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_PATA_FTIDE010=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
@@ -55,8 +56,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GEMINI=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y

2
arch/arm/configs/pxa_defconfig
Voir le fichier

@@ -471,7 +471,7 @@ CONFIG_LCD_PLATFORM=m
CONFIG_LCD_TOSA=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_TOSA=m
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_SOUND=m

2
arch/arm/configs/viper_defconfig
Voir le fichier

@@ -113,7 +113,7 @@ CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_PWM=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m

2
arch/arm/configs/zeus_defconfig
Voir le fichier

@@ -112,7 +112,7 @@ CONFIG_FB_PXA=m
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=m
CONFIG_SND=m

4
arch/arm/mach-at91/pm.c
Voir le fichier

@@ -533,8 +533,8 @@ static void __init at91_pm_backup_init(void)
}
pm_bu->suspended = 0;
pm_bu->canary = virt_to_phys(&canary);
pm_bu->resume = virt_to_phys(cpu_resume);
pm_bu->canary = __pa_symbol(&canary);
pm_bu->resume = __pa_symbol(cpu_resume);
return;

4
arch/arm/mach-omap2/hsmmc.c
Voir le fichier

@@ -58,10 +58,10 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
struct platform_device *pdev;
int res;
if (omap_hsmmc_done != 1)
if (omap_hsmmc_done)
return;
omap_hsmmc_done++;
omap_hsmmc_done = 1;
for (; c->mmc; c++) {
pdev = c->pdev;

1
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
Voir le fichier

@@ -839,6 +839,7 @@ static struct omap_hwmod dra7xx_gpio1_hwmod = {
.name = "gpio1",
.class = &dra7xx_gpio_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.main_clk = "wkupaon_iclk_mux",
.prcm = {
.omap4 = {

10
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
Voir le fichier

@@ -168,7 +168,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -194,7 +195,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -212,10 +214,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

19
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
Voir le fichier

@@ -107,6 +107,9 @@
states = <3300000 0>,
<1800000 1>;
regulator-settling-time-up-us = <100>;
regulator-settling-time-down-us = <5000>;
};
wifi_32k: wifi-32k {
@@ -250,7 +253,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -276,11 +280,16 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
max-frequency = <200000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
@@ -294,10 +303,10 @@
&sd_emmc_c {
status = "disabled";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;

12
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
Voir le fichier

@@ -51,7 +51,7 @@
/ {
compatible = "nexbox,a95x", "amlogic,meson-gxbb";
model = "NEXBOX A95X";
aliases {
serial0 = &uart_AO;
};
@@ -232,7 +232,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -253,7 +254,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -271,10 +273,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

9
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
Voir le fichier

@@ -50,7 +50,7 @@
/ {
compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
model = "Hardkernel ODROID-C2";
aliases {
serial0 = &uart_AO;
};
@@ -253,7 +253,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -271,10 +272,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;

13
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
Voir le fichier

@@ -194,7 +194,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -220,10 +221,14 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
@@ -238,10 +243,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

10
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
Voir le fichier

@@ -155,7 +155,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -181,7 +182,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -198,10 +200,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

39
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
Voir le fichier

@@ -392,6 +392,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
@@ -430,6 +441,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
@@ -442,6 +464,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
@@ -661,21 +694,21 @@
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

7
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
Voir le fichier

@@ -123,7 +123,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -141,10 +142,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <100000000>;
non-removable;

13
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
Voir le fichier

@@ -91,6 +91,9 @@
states = <3300000 0>,
<1800000 1>;
regulator-settling-time-up-us = <200>;
regulator-settling-time-down-us = <50000>;
};
vddio_boot: regulator-vddio_boot {
@@ -197,10 +200,14 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
max-frequency = <100000000>;
disable-wp;
@@ -215,10 +222,12 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-3_3v;
max-frequency = <50000000>;
non-removable;
disable-wp;

10
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
Voir le fichier

@@ -189,7 +189,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -210,7 +211,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -228,10 +230,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

10
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
Voir le fichier

@@ -95,7 +95,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
@@ -116,7 +117,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -134,10 +136,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

39
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
Voir le fichier

@@ -281,6 +281,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
@@ -319,6 +330,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
@@ -331,6 +353,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
@@ -603,21 +636,21 @@
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_SD_EMMC_A_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

7
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
Voir le fichier

@@ -175,7 +175,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
@@ -193,10 +194,10 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

1
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
Voir le fichier

@@ -220,7 +220,6 @@
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;

4
arch/arm64/boot/dts/marvell/armada-ap806.dtsi
Voir le fichier

@@ -254,7 +254,7 @@
ap_syscon: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
reg = <0x6f4000 0x2000>;
ap_clk: clock {
compatible = "marvell,ap806-clock";
@@ -265,7 +265,7 @@
compatible = "marvell,ap806-pinctrl";
};
ap_gpio: gpio {
ap_gpio: gpio@1040 {
compatible = "marvell,armada-8k-gpio";
offset = <0x1040>;
ngpios = <20>;

72
arch/arm64/boot/dts/rockchip/rk3368.dtsi
Voir le fichier

@@ -113,8 +113,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@@ -123,8 +122,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_l2: cpu@2 {
@@ -132,8 +129,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_l3: cpu@3 {
@@ -141,8 +136,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
clocks = <&cru ARMCLKL>;
operating-points-v2 = <&cluster0_opp>;
};
cpu_b0: cpu@100 {
@@ -150,8 +143,7 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>; /* min followed by max */
};
@@ -160,8 +152,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
cpu_b2: cpu@102 {
@@ -169,8 +159,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
cpu_b3: cpu@103 {
@@ -178,62 +166,6 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
clocks = <&cru ARMCLKB>;
operating-points-v2 = <&cluster1_opp>;
};
};
cluster0_opp: opp-table0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <950000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000>;
};
opp02 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
opp03 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1025000>;
};
opp04 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1125000>;
};
};
cluster1_opp: opp-table1 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <312000000>;
opp-microvolt = <950000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000>;
};
opp02 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000>;
};
opp03 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <975000>;
};
opp04 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1050000>;
};
};

6
arch/arm64/boot/dts/rockchip/rk3399.dtsi
Voir le fichier

@@ -1629,9 +1629,9 @@
compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff960000 0x0 0x8000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>,
<&cru SCLK_DPHY_TX0_CFG>;
clock-names = "ref", "pclk", "phy_cfg";
clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
<&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
clock-names = "ref", "pclk", "phy_cfg", "grf";
power-domains = <&power RK3399_PD_VIO>;
rockchip,grf = <&grf>;
status = "disabled";