Merge tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big set of USB patches for 3.8-rc1.

  Lots of USB host driver cleanups in here, and a bit of a reorg of the
  EHCI driver to make it easier for the different EHCI platform drivers
  to all work together nicer, which was a reduction in overall code.  We
  also deleted some unused firmware files, and got rid of the very old
  file_storage usb gadget driver that had been broken for a long time.
  This means we ended up removing way more code than added, always a
  nice thing to see:
	 310 files changed, 3028 insertions(+), 10754 deletions(-)

  Other than that, the usual set of new device ids, driver fixes, gadget
  driver and controller updates and the like.

  All of these have been in the linux-next tree for a number of weeks.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (228 commits)
  USB: mark uas driver as BROKEN
  xhci: Add Lynx Point LP to list of Intel switchable hosts
  uwb: fix uwb_dev_unlock() missed at an error path in uwb_rc_cmd_async()
  USB: ftdi_sio: Add support for Newport AGILIS motor drivers
  MAINTAINERS: remove drivers/block/ub.c
  USB: chipidea: fix use after free bug
  ezusb: add dependency to USB
  usb: ftdi_sio: fixup BeagleBone A5+ quirk
  USB: cp210x: add Virtenio Preon32 device id
  usb: storage: remove redundant memset() in usb_probe_stor1()
  USB: option: blacklist network interface on Huawei E173
  USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue
  USB: add new zte 3g-dongle's pid to option.c
  USB: opticon: switch to generic read implementation
  USB: opticon: refactor reab-urb processing
  USB: opticon: use usb-serial bulk-in urb
  USB: opticon: increase bulk-in size
  USB: opticon: use port as urb context
  USB: opticon: pass port to get_serial_info
  USB: opticon: make private data port specific
  ...

Documentation/DocBook/gadget.tmpl

@@ -671,7 +671,7 @@ than a kernel driver.
 <para>There's a USB Mass Storage class driver, which provides
 a different solution for interoperability with systems such
 as MS-Windows and MacOS.
-That <emphasis>File-backed Storage</emphasis> driver uses a
+That <emphasis>Mass Storage</emphasis> driver uses a
 file or block device as backing store for a drive,
 like the <filename>loop</filename> driver.
 The USB host uses the BBB, CB, or CBI versions of the mass

Documentation/devices.txt

@@ -2561,9 +2561,6 @@ Your cooperation is appreciated.
 		192 = /dev/usb/yurex1	First USB Yurex device
 		   ...
 		209 = /dev/usb/yurex16	16th USB Yurex device
-		240 = /dev/usb/dabusb0	First daubusb device
-		    ...
-		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
 		  0 = /dev/uba		First USB block device

Documentation/devicetree/bindings/usb/am33xx-usb.txt

@@ -3,12 +3,12 @@ AM33XX MUSB GLUE
  - ti,hwmods : must be "usb_otg_hs"
  - multipoint : Should be "1" indicating the musb controller supports
    multipoint. This is a MUSB configuration-specific setting.
- - num_eps : Specifies the number of endpoints. This is also a
+ - num-eps : Specifies the number of endpoints. This is also a
    MUSB configuration-specific setting. Should be set to "16"
- - ram_bits : Specifies the ram address size. Should be set to "12"
+ - ram-bits : Specifies the ram address size. Should be set to "12"
- - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
+ - port0-mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
    represents PERIPHERAL.
- - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
+ - port1-mode : Should be "1" to represent HOST. "3" signifies OTG and "2"
    represents PERIPHERAL.
  - power : Should be "250". This signifies the controller can supply upto
    500mA when operating in host mode.

Documentation/usb/error-codes.txt

@@ -21,6 +21,8 @@ Non-USB-specific:
 
 USB-specific:
 
+-EBUSY		The URB is already active.
+
 -ENODEV		specified USB-device or bus doesn't exist
 
 -ENOENT		specified interface or endpoint does not exist or
@@ -35,9 +37,8 @@ USB-specific:
 		d) ISO: number_of_packets is < 0
 		e) various other cases
 
--EAGAIN		a) specified ISO start frame too early
+-EXDEV		ISO: URB_ISO_ASAP wasn't specified and all the frames
-		b) (using ISO-ASAP) too much scheduled for the future
+		the URB would be scheduled in have already expired.
-		   wait some time and try again.
 
 -EFBIG		Host controller driver can't schedule that many ISO frames.
 

Documentation/usb/mass-storage.txt

@@ -20,9 +20,9 @@
 
   This document describes how to use the gadget from user space, its
   relation to mass storage function (or MSF) and different gadgets
-  using it, and how it differs from File Storage Gadget (or FSG).  It
+  using it, and how it differs from File Storage Gadget (or FSG)
-  will talk only briefly about how to use MSF within composite
+  (which is no longer included in Linux).  It will talk only briefly
-  gadgets.
+  about how to use MSF within composite gadgets.
 
 * Module parameters
 
@@ -198,16 +198,15 @@
   The Mass Storage Function and thus the Mass Storage Gadget has been
   based on the File Storage Gadget.  The difference between the two is
   that MSG is a composite gadget (ie. uses the composite framework)
-  while file storage gadget is a traditional gadget.  From userspace
+  while file storage gadget was a traditional gadget.  From userspace
   point of view this distinction does not really matter, but from
   kernel hacker's point of view, this means that (i) MSG does not
   duplicate code needed for handling basic USB protocol commands and
   (ii) MSF can be used in any other composite gadget.
 
-  Because of that, File Storage Gadget has been deprecated and
+  Because of that, File Storage Gadget has been removed in Linux 3.8.
-  scheduled to be removed in Linux 3.8.  All users need to transition
+  All users need to transition to the Mass Storage Gadget.  The two
-  to the Mass Storage Gadget by that time.  The two gadgets behave
+  gadgets behave mostly the same from the outside except:
-  mostly the same from the outside except:
 
   1. In FSG the “removable” and “cdrom” module parameters set the flag
      for all logical units whereas in MSG they accept a list of y/n

MAINTAINERS

@@ -7587,12 +7587,6 @@ L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/usb/storage/uas.c
 
-USB BLOCK DRIVER (UB ub)
-M:	Pete Zaitcev <zaitcev@redhat.com>
-L:	linux-usb@vger.kernel.org
-S:	Supported
-F:	drivers/block/ub.c
-
 USB CDC ETHERNET DRIVER
 M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org

arch/arm/configs/afeb9260_defconfig

@@ -79,7 +79,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DEBUG=y

arch/arm/configs/at91sam9260_defconfig

@@ -75,7 +75,7 @@ CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y

arch/arm/configs/at91sam9261_defconfig

@@ -125,7 +125,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=m

arch/arm/configs/at91sam9263_defconfig

@@ -133,7 +133,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_SDIO_UART=m

arch/arm/configs/at91sam9g20_defconfig

@@ -96,7 +96,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=m

arch/arm/configs/corgi_defconfig

@@ -218,7 +218,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_PXA=y

arch/arm/configs/davinci_all_defconfig

@@ -144,7 +144,7 @@ CONFIG_USB_GADGET_DEBUG_FS=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m

arch/arm/configs/h7202_defconfig

@@ -34,8 +34,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_USB_GADGET=m
 CONFIG_USB_ZERO=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_USB_G_SERIAL=m
 CONFIG_EXT2_FS=y
 CONFIG_TMPFS=y

arch/arm/configs/magician_defconfig

@@ -136,7 +136,7 @@ CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_USB_GPIO_VBUS=y

arch/arm/configs/mini2440_defconfig

@@ -240,7 +240,7 @@ CONFIG_USB_GADGET_S3C2410=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/arm/configs/omap1_defconfig

@@ -214,8 +214,7 @@ CONFIG_USB_TEST=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y

arch/arm/configs/prima2_defconfig

@@ -37,7 +37,6 @@ CONFIG_SPI_SIRF=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
 CONFIG_USB_GADGET=y
-CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y

arch/arm/configs/spitz_defconfig

@@ -214,7 +214,7 @@ CONFIG_USB_GADGET_DUMMY_HCD=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_PXA=y

arch/arm/configs/stamp9g20_defconfig

@@ -97,7 +97,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=m
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y

arch/arm/configs/viper_defconfig

@@ -139,7 +139,7 @@ CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_RTC_CLASS=y

arch/arm/configs/zeus_defconfig

@@ -143,7 +143,7 @@ CONFIG_USB_GADGET=m
 CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_MMC=y

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -24,6 +24,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
@@ -32,6 +34,7 @@
 #include <asm/mach/time.h>
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
+#include <mach/pm.h>
 #include "core.h"
 #include "devices.h"
 
@@ -125,13 +128,52 @@ static struct resource cns3xxx_usb_ehci_resources[] = {
 
 static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
 
+static int csn3xxx_usb_power_on(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	return 0;
+}
+
+static void csn3xxx_usb_power_off(struct platform_device *pdev)
+{
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+}
+
+static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
 static struct platform_device cns3xxx_usb_ehci_device = {
-	.name          = "cns3xxx-ehci",
+	.name          = "ehci-platform",
 	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
 	.resource      = cns3xxx_usb_ehci_resources,
 	.dev           = {
 		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data     = &cns3xxx_usb_ehci_pdata,
 	},
 };
 
@@ -149,13 +191,20 @@ static struct resource cns3xxx_usb_ohci_resources[] = {
 
 static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
 
+static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
+	.num_ports	= 1,
+	.power_on	= csn3xxx_usb_power_on,
+	.power_off	= csn3xxx_usb_power_off,
+};
+
 static struct platform_device cns3xxx_usb_ohci_device = {
-	.name          = "cns3xxx-ohci",
+	.name          = "ohci-platform",
 	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
 	.resource      = cns3xxx_usb_ohci_resources,
 	.dev           = {
 		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data	   = &cns3xxx_usb_ohci_pdata,
 	},
 };
 

arch/avr32/configs/atngw100_defconfig

@@ -109,7 +109,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atngw100_evklcd100_defconfig

@@ -125,7 +125,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atngw100_evklcd101_defconfig

@@ -124,7 +124,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atngw100_mrmt_defconfig

@@ -99,7 +99,7 @@ CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y

arch/avr32/configs/atngw100mkii_defconfig

@@ -111,7 +111,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atngw100mkii_evklcd100_defconfig

@@ -128,7 +128,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atngw100mkii_evklcd101_defconfig

@@ -127,7 +127,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=350
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atstk1002_defconfig

@@ -126,7 +126,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atstk1003_defconfig

@@ -105,7 +105,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atstk1004_defconfig

@@ -104,7 +104,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/atstk1006_defconfig

@@ -129,7 +129,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/favr-32_defconfig

@@ -117,7 +117,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y

arch/avr32/configs/hammerhead_defconfig

@@ -127,7 +127,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=m
 CONFIG_MMC_ATMELMCI=m

arch/blackfin/configs/CM-BF527_defconfig

@@ -106,7 +106,7 @@ CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_STORAGE=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_RTC_CLASS=y

arch/blackfin/configs/CM-BF548_defconfig

@@ -107,7 +107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_MMC=m

arch/blackfin/configs/CM-BF561_defconfig

@@ -83,7 +83,7 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_USB_GADGET=m
 CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_MMC=y

arch/mips/alchemy/common/Makefile

@@ -6,7 +6,7 @@
 #
 
 obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
-	sleeper.o dma.o dbdma.o vss.o irq.o
+	sleeper.o dma.o dbdma.o vss.o irq.o usb.o
 
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)

arch/mips/alchemy/common/platform.c

@@ -17,6 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
@@ -122,6 +124,53 @@ static void __init alchemy_setup_uarts(int ctype)
 static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
 static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
 
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+	return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+	.no_io_watchdog	= 1,
+	.power_on	= alchemy_ehci_power_on,
+	.power_off	= alchemy_ehci_power_off,
+	.power_suspend	= alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+	.power_on		= alchemy_ohci_power_on,
+	.power_off		= alchemy_ohci_power_off,
+	.power_suspend		= alchemy_ohci_power_off,
+};
+
 static unsigned long alchemy_ohci_data[][2] __initdata = {
 	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
 	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
@@ -169,9 +218,10 @@ static void __init alchemy_setup_usb(int ctype)
 	res[1].start = alchemy_ohci_data[ctype][1];
 	res[1].end = res[1].start;
 	res[1].flags = IORESOURCE_IRQ;
-	pdev->name = "au1xxx-ohci";
+	pdev->name = "ohci-platform";
 	pdev->id = 0;
 	pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+	pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 	if (platform_device_register(pdev))
 		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
@@ -188,9 +238,10 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].start = alchemy_ehci_data[ctype][1];
 		res[1].end = res[1].start;
 		res[1].flags = IORESOURCE_IRQ;
-		pdev->name = "au1xxx-ehci";
+		pdev->name = "ehci-platform";
 		pdev->id = 0;
 		pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+		pdev->dev.platform_data = &alchemy_ehci_pdata;
 
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
@@ -207,9 +258,10 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].start = AU1300_USB_INT;
 		res[1].end = res[1].start;
 		res[1].flags = IORESOURCE_IRQ;
-		pdev->name = "au1xxx-ohci";
+		pdev->name = "ohci-platform";
 		pdev->id = 1;
 		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+		pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 		if (platform_device_register(pdev))
 			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");

arch/mips/ath79/dev-usb.c

@@ -50,13 +50,11 @@ static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
 
 static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
 	.has_synopsys_hc_bug	= 1,
-	.port_power_off		= 1,
 };
 
 static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
 	.caps_offset		= 0x100,
 	.has_tt			= 1,
-	.port_power_off		= 1,
 };
 
 static struct platform_device ath79_ehci_device = {

arch/mips/configs/bcm47xx_defconfig

@@ -473,7 +473,7 @@ CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_LEDS_CLASS=y

arch/mips/configs/db1000_defconfig

@@ -233,6 +233,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y

arch/mips/configs/db1235_defconfig

@@ -346,8 +346,10 @@ CONFIG_USB=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_CLKGATE=y

arch/mips/configs/gpr_defconfig

@@ -291,6 +291,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=m
 CONFIG_USB_LIBUSUAL=y
 CONFIG_USB_SERIAL=y

arch/mips/configs/ls1b_defconfig

@@ -76,6 +76,7 @@ CONFIG_HID_GENERIC=m
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_STORAGE=m
 CONFIG_USB_SERIAL=m

arch/mips/configs/mtx1_defconfig

@@ -581,6 +581,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_UHCI_HCD=m
 CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
@@ -661,7 +662,7 @@ CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_MMC=m

arch/mips/loongson1/common/platform.c

@@ -13,6 +13,7 @@
 #include <linux/phy.h>
 #include <linux/serial_8250.h>
 #include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
 #include <asm-generic/sizes.h>
 
 #include <loongson1.h>
@@ -107,13 +108,17 @@ static struct resource ls1x_ehci_resources[] = {
 	},
 };
 
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
 struct platform_device ls1x_ehci_device = {
-	.name		= "ls1x-ehci",
+	.name		= "ehci-platform",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(ls1x_ehci_resources),
 	.resource	= ls1x_ehci_resources,
 	.dev		= {
 		.dma_mask = &ls1x_ehci_dmamask,
+		.platform_data = &ls1x_ehci_pdata,
 	},
 };
 

arch/mips/netlogic/xlr/platform.c

@@ -15,6 +15,8 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlr/iomap.h>
@@ -123,12 +125,18 @@ static u64 xls_usb_dmamask = ~(u32)0;
 		},							\
 	}
 
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+	.caps_offset	= 0,
+};
+
+static struct usb_ohci_pdata xls_usb_ohci_pdata;
+
 static struct platform_device xls_usb_ehci_device =
-			 USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+			 USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
 static struct platform_device xls_usb_ohci_device_0 =
-			 USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
+			 USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
 static struct platform_device xls_usb_ohci_device_1 =
-			 USB_PLATFORM_DEV("ohci-xls-1", 2, PIC_USB_IRQ);
+			 USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
 
 static struct platform_device *xls_platform_devices[] = {
 	&xls_usb_ehci_device,
@@ -172,14 +180,17 @@ int xls_platform_usb_init(void)
 	memres = CPHYSADDR((unsigned long)usb_mmio);
 	xls_usb_ehci_device.resource[0].start = memres;
 	xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
 
 	memres += 0x400;
 	xls_usb_ohci_device_0.resource[0].start = memres;
 	xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
 
 	memres += 0x400;
 	xls_usb_ohci_device_1.resource[0].start = memres;
 	xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
 
 	return platform_add_devices(xls_platform_devices,
 				ARRAY_SIZE(xls_platform_devices));

arch/mips/pnx8550/common/platform.c

@@ -20,6 +20,7 @@
 #include <linux/serial.h>
 #include <linux/serial_pnx8xxx.h>
 #include <linux/platform_device.h>
+#include <linux/usb/ohci_pdriver.h>
 
 #include <int.h>
 #include <usb.h>
@@ -96,12 +97,40 @@ static u64 ohci_dmamask = DMA_BIT_MASK(32);
 
 static u64 uart_dmamask = DMA_BIT_MASK(32);
 
+static int pnx8550_usb_ohci_power_on(struct platform_device *pdev)
+{
+	/*
+	 * Set register CLK48CTL to enable and 48MHz
+	 */
+	outl(0x00000003, PCI_BASE | 0x0004770c);
+
+	/*
+	 * Set register CLK12CTL to enable and 48MHz
+	 */
+	outl(0x00000003, PCI_BASE | 0x00047710);
+
+	udelay(100);
+
+	return 0;
+}
+
+static void pnx8550_usb_ohci_power_off(struct platform_device *pdev)
+{
+	udelay(10);
+}
+
+static struct usb_ohci_pdata pnx8550_usb_ohci_pdata = {
+	.power_on	= pnx8550_usb_ohci_power_on,
+	.power_off	= pnx8550_usb_ohci_power_off,
+};
+
 static struct platform_device pnx8550_usb_ohci_device = {
-	.name		= "pnx8550-ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &pnx8550_usb_ohci_pdata,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
 	.resource	= pnx8550_usb_ohci_resources,

arch/sh/configs/ecovec24_defconfig

@@ -112,7 +112,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_SDHI=y

arch/sh/configs/se7724_defconfig

@@ -109,7 +109,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_SPI=y

arch/sh/kernel/cpu/sh3/setup-sh7720.c

@@ -20,6 +20,7 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <asm/rtc.h>
 #include <cpu/serial.h>
 
@@ -103,12 +104,15 @@ static struct resource usb_ohci_resources[] = {
 
 static u64 usb_ohci_dma_mask = 0xffffffffUL;
 
+static struct usb_ohci_pdata usb_ohci_pdata;
+
 static struct platform_device usb_ohci_device = {
-	.name		= "sh_ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &usb_ohci_dma_mask,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb_ohci_pdata,
 	},
 	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
 	.resource	= usb_ohci_resources,

arch/sh/kernel/cpu/sh4a/setup-sh7757.c

@@ -19,6 +19,7 @@
 #include <linux/sh_timer.h>
 #include <linux/sh_dma.h>
 #include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <cpu/dma-register.h>
 #include <cpu/sh7757.h>
 
@@ -750,12 +751,15 @@ static struct resource usb_ohci_resources[] = {
 	},
 };
 
+static struct usb_ohci_pdata usb_ohci_pdata;
+
 static struct platform_device usb_ohci_device = {
-	.name		= "sh_ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
 	.dev = {
 		.dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data	= &usb_ohci_pdata,
 	},
 	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
 	.resource	= usb_ohci_resources,

arch/sh/kernel/cpu/sh4a/setup-sh7763.c

@@ -16,6 +16,7 @@
 #include <linux/sh_intc.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/usb/ohci_pdriver.h>
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xffe00000,
@@ -106,12 +107,15 @@ static struct resource usb_ohci_resources[] = {
 
 static u64 usb_ohci_dma_mask = 0xffffffffUL;
 
+static struct usb_ohci_pdata usb_ohci_pdata;
+
 static struct platform_device usb_ohci_device = {
-	.name		= "sh_ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &usb_ohci_dma_mask,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb_ohci_pdata,
 	},
 	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
 	.resource	= usb_ohci_resources,

arch/sh/kernel/cpu/sh4a/setup-sh7786.c

@@ -23,6 +23,7 @@
 #include <linux/sh_timer.h>
 #include <linux/sh_dma.h>
 #include <linux/sh_intc.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <cpu/dma-register.h>
 #include <asm/mmzone.h>
 
@@ -583,12 +584,15 @@ static struct resource usb_ohci_resources[] = {
 	},
 };
 
+static struct usb_ohci_pdata usb_ohci_pdata;
+
 static struct platform_device usb_ohci_device = {
-	.name		= "sh_ohci",
+	.name		= "ohci-platform",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &usb_ohci_device.dev.coherent_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &usb_ohci_pdata,
 	},
 	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
 	.resource	= usb_ohci_resources,

drivers/usb/c67x00/c67x00-drv.c

@@ -116,7 +116,7 @@ static irqreturn_t c67x00_irq(int irq, void *__dev)
 
 /* ------------------------------------------------------------------------- */
 
-static int __devinit c67x00_drv_probe(struct platform_device *pdev)
+static int c67x00_drv_probe(struct platform_device *pdev)
 {
 	struct c67x00_device *c67x00;
 	struct c67x00_platform_data *pdata;
@@ -191,7 +191,7 @@ static int __devinit c67x00_drv_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __devexit c67x00_drv_remove(struct platform_device *pdev)
+static int c67x00_drv_remove(struct platform_device *pdev)
 {
 	struct c67x00_device *c67x00 = platform_get_drvdata(pdev);
 	struct resource *res;
@@ -219,7 +219,7 @@ static int __devexit c67x00_drv_remove(struct platform_device *pdev)
 
 static struct platform_driver c67x00_driver = {
 	.probe	= c67x00_drv_probe,
-	.remove	= __devexit_p(c67x00_drv_remove),
+	.remove	= c67x00_drv_remove,
 	.driver	= {
 		.owner = THIS_MODULE,
 		.name = "c67x00",

drivers/usb/chipidea/Kconfig

@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
 	depends on USB=y || USB=USB_CHIPIDEA
+	depends on USB_EHCI_HCD
 	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the

drivers/usb/chipidea/ci13xxx_imx.c

@@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
 
 /* End of common functions shared by usbmisc drivers*/
 
-static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
+static struct ci13xxx_platform_data ci13xxx_imx_platdata  = {
 	.name			= "ci13xxx_imx",
 	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
 				  CI13XXX_PULLUP_ON_VBUS |
@@ -93,7 +93,7 @@ static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
 	.capoffset		= DEF_CAPOFFSET,
 };
 
-static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+static int ci13xxx_imx_probe(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data;
 	struct platform_device *plat_ci, *phy_pdev;
@@ -220,7 +220,7 @@ put_np:
 	return ret;
 }
 
-static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+static int ci13xxx_imx_remove(struct platform_device *pdev)
 {
 	struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
 
@@ -252,7 +252,7 @@ MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
 
 static struct platform_driver ci13xxx_imx_driver = {
 	.probe = ci13xxx_imx_probe,
-	.remove = __devexit_p(ci13xxx_imx_remove),
+	.remove = ci13xxx_imx_remove,
 	.driver = {
 		.name = "imx_usb",
 		.owner = THIS_MODULE,

drivers/usb/chipidea/ci13xxx_msm.c

@@ -55,7 +55,7 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 	.notify_event		= ci13xxx_msm_notify_event,
 };
 
-static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
+static int ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
 
@@ -77,7 +77,7 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
+static int ci13xxx_msm_remove(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci = platform_get_drvdata(pdev);
 
@@ -89,7 +89,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
 
 static struct platform_driver ci13xxx_msm_driver = {
 	.probe = ci13xxx_msm_probe,
-	.remove = __devexit_p(ci13xxx_msm_remove),
+	.remove = ci13xxx_msm_remove,
 	.driver = { .name = "msm_hsusb", },
 };
 

drivers/usb/chipidea/ci13xxx_pci.c

@@ -48,7 +48,7 @@ struct ci13xxx_platform_data penwell_pci_platdata = {
  * Allocates basic PCI resources for this USB device controller, and then
  * invokes the udc_probe() method to start the UDC associated with it
  */
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
+static int ci13xxx_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
 	struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
@@ -107,7 +107,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
  * first invoking the udc_remove() and then releases
  * all PCI resources allocated for this USB device controller
  */
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
+static void ci13xxx_pci_remove(struct pci_dev *pdev)
 {
 	struct platform_device *plat_ci = pci_get_drvdata(pdev);
 
@@ -147,7 +147,7 @@ static struct pci_driver ci13xxx_pci_driver = {
 	.name         =	UDC_DRIVER_NAME,
 	.id_table     =	ci13xxx_pci_id_table,
 	.probe        =	ci13xxx_pci_probe,
-	.remove       =	__devexit_p(ci13xxx_pci_remove),
+	.remove       =	ci13xxx_pci_remove,
 };
 
 module_pci_driver(ci13xxx_pci_driver);

drivers/usb/chipidea/core.c

@@ -385,12 +385,13 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device);
 
 void ci13xxx_remove_device(struct platform_device *pdev)
 {
+	int id = pdev->id;
 	platform_device_unregister(pdev);
-	ida_simple_remove(&ci_ida, pdev->id);
+	ida_simple_remove(&ci_ida, id);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
 
-static int __devinit ci_hdrc_probe(struct platform_device *pdev)
+static int ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct ci13xxx	*ci;
@@ -508,7 +509,7 @@ rm_wq:
 	return ret;
 }
 
-static int __devexit ci_hdrc_remove(struct platform_device *pdev)
+static int ci_hdrc_remove(struct platform_device *pdev)
 {
 	struct ci13xxx *ci = platform_get_drvdata(pdev);
 
@@ -523,7 +524,7 @@ static int __devexit ci_hdrc_remove(struct platform_device *pdev)
 
 static struct platform_driver ci_hdrc_driver = {
 	.probe	= ci_hdrc_probe,
-	.remove	= __devexit_p(ci_hdrc_remove),
+	.remove	= ci_hdrc_remove,
 	.driver	= {
 		.name	= "ci_hdrc",
 	},

drivers/usb/chipidea/debug.c

@@ -160,9 +160,6 @@ static ssize_t show_device(struct device *dev, struct device_attribute *attr,
 		       gadget->speed);
 	n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed         = %d\n",
 		       gadget->max_speed);
-	/* TODO: Scheduled for removal in 3.8. */
-	n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed      = %d\n",
-		       gadget_is_dualspeed(gadget));
 	n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg            = %d\n",
 		       gadget->is_otg);
 	n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral   = %d\n",

drivers/usb/chipidea/host.c

@@ -20,77 +20,18 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/chipidea.h>
 
-#define CHIPIDEA_EHCI
+#include "../host/ehci.h"
-#include "../host/ehci-hcd.c"
 
 #include "ci.h"
 #include "bits.h"
 #include "host.h"
 
-static int ci_ehci_setup(struct usb_hcd *hcd)
+static struct hc_driver __read_mostly ci_ehci_hc_driver;
-{
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	int ret;
-
-	hcd->has_tt = 1;
-
-	ret = ehci_setup(hcd);
-	if (ret)
-		return ret;
-
-	ehci_port_power(ehci, 0);
-
-	return ret;
-}
-
-static const struct hc_driver ci_ehci_hc_driver = {
-	.description	= "ehci_hcd",
-	.product_desc	= "ChipIdea HDRC EHCI",
-	.hcd_priv_size	= sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq	= ehci_irq,
-	.flags	= HCD_MEMORY | HCD_USB2,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset		= ci_ehci_setup,
-	.start		= ehci_run,
-	.stop		= ehci_stop,
-	.shutdown	= ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue		= ehci_urb_enqueue,
-	.urb_dequeue		= ehci_urb_dequeue,
-	.endpoint_disable	= ehci_endpoint_disable,
-	.endpoint_reset		= ehci_endpoint_reset,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= ehci_hub_control,
-	.bus_suspend		= ehci_bus_suspend,
-	.bus_resume		= ehci_bus_resume,
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
-
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
 
 static irqreturn_t host_irq(struct ci13xxx *ci)
 {
@@ -157,5 +98,7 @@ int ci_hdrc_host_init(struct ci13xxx *ci)
 	rdrv->name	= "host";
 	ci->roles[CI_ROLE_HOST] = rdrv;
 
+	ehci_init_driver(&ci_ehci_hc_driver, NULL);
+
 	return 0;
 }

drivers/usb/chipidea/usbmisc_imx6q.c

@@ -82,7 +82,7 @@ static const struct of_device_id usbmisc_imx6q_dt_ids[] = {
 	{ /* sentinel */ }
 };
 
-static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
+static int usbmisc_imx6q_probe(struct platform_device *pdev)
 {
 	struct resource	*res;
 	struct imx6q_usbmisc *data;
@@ -127,7 +127,7 @@ static int __devinit usbmisc_imx6q_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
+static int usbmisc_imx6q_remove(struct platform_device *pdev)
 {
 	usbmisc_unset_ops(&imx6q_usbmisc_ops);
 	clk_disable_unprepare(usbmisc->clk);
@@ -136,7 +136,7 @@ static int __devexit usbmisc_imx6q_remove(struct platform_device *pdev)
 
 static struct platform_driver usbmisc_imx6q_driver = {
 	.probe = usbmisc_imx6q_probe,
-	.remove = __devexit_p(usbmisc_imx6q_remove),
+	.remove = usbmisc_imx6q_remove,
 	.driver = {
 		.name = "usbmisc_imx6q",
 		.owner = THIS_MODULE,

drivers/usb/class/cdc-acm.c

@@ -787,6 +787,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 	tmp.flags = ASYNC_LOW_LATENCY;
 	tmp.xmit_fifo_size = acm->writesize;
 	tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
+	tmp.close_delay	= acm->port.close_delay / 10;
+	tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				acm->port.closing_wait / 10;
 
 	if (copy_to_user(info, &tmp, sizeof(tmp)))
 		return -EFAULT;
@@ -794,6 +798,37 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 		return 0;
 }
 
+static int set_serial_info(struct acm *acm,
+				struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&acm->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != acm->port.close_delay) ||
+		    (closing_wait != acm->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&acm->port.mutex);
+	return retval;
+}
+
 static int acm_tty_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
@@ -804,6 +839,9 @@ static int acm_tty_ioctl(struct tty_struct *tty,
 	case TIOCGSERIAL: /* gets serial port data */
 		rv = get_serial_info(acm, (struct serial_struct __user *) arg);
 		break;
+	case TIOCSSERIAL:
+		rv = set_serial_info(acm, (struct serial_struct __user *) arg);
+		break;
 	}
 
 	return rv;

drivers/usb/core/devices.c

@@ -591,7 +591,6 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 
 	/* Now look at all of this device's children. */
 	usb_hub_for_each_child(usbdev, chix, childdev) {
-		if (childdev) {
 		usb_lock_device(childdev);
 		ret = usb_device_dump(buffer, nbytes, skip_bytes,
 				      file_offset, childdev, bus,
@@ -601,7 +600,6 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 			return total_written;
 		total_written += ret;
 	}
-	}
 	return total_written;
 }
 

drivers/usb/core/driver.c

@@ -32,8 +32,6 @@
 #include "usb.h"
 
 
-#ifdef CONFIG_HOTPLUG
-
 /*
  * Adds a new dynamic USBdevice ID to this driver,
  * and cause the driver to probe for all devices again.
@@ -194,20 +192,6 @@ static void usb_free_dynids(struct usb_driver *usb_drv)
 	}
 	spin_unlock(&usb_drv->dynids.lock);
 }
-#else
-static inline int usb_create_newid_files(struct usb_driver *usb_drv)
-{
-	return 0;
-}
-
-static void usb_remove_newid_files(struct usb_driver *usb_drv)
-{
-}
-
-static inline void usb_free_dynids(struct usb_driver *usb_drv)
-{
-}
-#endif
 
 static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf,
 							struct usb_driver *drv)
@@ -790,7 +774,6 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
-#ifdef	CONFIG_HOTPLUG
 static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
@@ -832,14 +815,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-#else
-
-static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	return -ENODEV;
-}
-#endif	/* CONFIG_HOTPLUG */
-
 /**
  * usb_register_device_driver - register a USB device (not interface) driver
  * @new_udriver: USB operations for the device driver

drivers/usb/core/generic.c

@@ -47,6 +47,9 @@ int usb_choose_configuration(struct usb_device *udev)
 	int insufficient_power = 0;
 	struct usb_host_config *c, *best;
 
+	if (usb_device_is_owned(udev))
+		return 0;
+
 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
@@ -160,9 +163,7 @@ static int generic_probe(struct usb_device *udev)
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
-	if (usb_device_is_owned(udev))
+	if (udev->authorized == 0)
-		;		/* Don't configure if the device is owned */
-	else if (udev->authorized == 0)
 		dev_err(&udev->dev, "Device is not authorized for usage\n");
 	else {
 		c = usb_choose_configuration(udev);

drivers/usb/core/hcd.c

@@ -2039,8 +2039,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 	status = hcd->driver->bus_resume(hcd);
 	clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 	if (status == 0) {
-		/* TRSMRCY = 10 msec */
+		struct usb_device *udev;
-		msleep(10);
+		int port1;
+
 		spin_lock_irq(&hcd_root_hub_lock);
 		if (!HCD_DEAD(hcd)) {
 			usb_set_device_state(rhdev, rhdev->actconfig
@@ -2050,6 +2051,20 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
 			hcd->state = HC_STATE_RUNNING;
 		}
 		spin_unlock_irq(&hcd_root_hub_lock);
+
+		/*
+		 * Check whether any of the enabled ports on the root hub are
+		 * unsuspended.  If they are then a TRSMRCY delay is needed
+		 * (this is what the USB-2 spec calls a "global resume").
+		 * Otherwise we can skip the delay.
+		 */
+		usb_hub_for_each_child(rhdev, port1, udev) {
+			if (udev->state != USB_STATE_NOTATTACHED &&
+					!udev->port_is_suspended) {
+				usleep_range(10000, 11000);	/* TRSMRCY */
+				break;
+			}
+		}
 	} else {
 		hcd->state = old_state;
 		dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",

drivers/usb/core/hub.c

@@ -39,6 +39,9 @@
 #endif
 #endif
 
+#define USB_VENDOR_GENESYS_LOGIC		0x05e3
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
+
 struct usb_port {
 	struct usb_device *child;
 	struct device dev;
@@ -86,6 +89,8 @@ struct usb_hub {
 	unsigned		quiescing:1;
 	unsigned		disconnected:1;
 
+	unsigned		quirk_check_port_auto_suspend:1;
+
 	unsigned		has_indicators:1;
 	u8			indicator[USB_MAXCHILDREN];
 	struct delayed_work	leds;
@@ -736,7 +741,6 @@ static void hub_tt_work(struct work_struct *work)
 	struct usb_hub		*hub =
 		container_of(work, struct usb_hub, tt.clear_work);
 	unsigned long		flags;
-	int			limit = 100;
 
 	spin_lock_irqsave (&hub->tt.lock, flags);
 	while (!list_empty(&hub->tt.clear_list)) {
@@ -746,9 +750,6 @@ static void hub_tt_work(struct work_struct *work)
 		const struct hc_driver	*drv;
 		int			status;
 
-		if (!hub->quiescing && --limit < 0)
-			break;
-
 		next = hub->tt.clear_list.next;
 		clear = list_entry (next, struct usb_tt_clear, clear_list);
 		list_del (&clear->clear_list);
@@ -1612,6 +1613,41 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+	/*
+	 * Set default autosuspend delay as 0 to speedup bus suspend,
+	 * based on the below considerations:
+	 *
+	 * - Unlike other drivers, the hub driver does not rely on the
+	 *   autosuspend delay to provide enough time to handle a wakeup
+	 *   event, and the submitted status URB is just to check future
+	 *   change on hub downstream ports, so it is safe to do it.
+	 *
+	 * - The patch might cause one or more auto supend/resume for
+	 *   below very rare devices when they are plugged into hub
+	 *   first time:
+	 *
+	 *   	devices having trouble initializing, and disconnect
+	 *   	themselves from the bus and then reconnect a second
+	 *   	or so later
+	 *
+	 *   	devices just for downloading firmware, and disconnects
+	 *   	themselves after completing it
+	 *
+	 *   For these quite rare devices, their drivers may change the
+	 *   autosuspend delay of their parent hub in the probe() to one
+	 *   appropriate value to avoid the subtle problem if someone
+	 *   does care it.
+	 *
+	 * - The patch may cause one or more auto suspend/resume on
+	 *   hub during running 'lsusb', but it is probably too
+	 *   infrequent to worry about.
+	 *
+	 * - Change autosuspend delay of hub can avoid unnecessary auto
+	 *   suspend timer for hub, also may decrease power consumption
+	 *   of USB bus.
+	 */
+	pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+
 	/* Hubs have proper suspend/resume support. */
 	usb_enable_autosuspend(hdev);
 
@@ -1670,6 +1706,9 @@ descriptor_error:
 	if (hdev->speed == USB_SPEED_HIGH)
 		highspeed_hubs++;
 
+	if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+		hub->quirk_check_port_auto_suspend = 1;
+
 	if (hub_configure(hub, endpoint) >= 0)
 		return 0;
 
@@ -2012,7 +2051,7 @@ static void show_string(struct usb_device *udev, char *id, char *string)
 {
 	if (!string)
 		return;
-	dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
+	dev_info(&udev->dev, "%s: %s\n", id, string);
 }
 
 static void announce_device(struct usb_device *udev)
@@ -2879,6 +2918,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""),
 				udev->do_remote_wakeup);
 		usb_set_device_state(udev, USB_STATE_SUSPENDED);
+		udev->port_is_suspended = 1;
 		msleep(10);
 	}
 	usb_mark_last_busy(hub->hdev);
@@ -3043,6 +3083,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
  SuspendCleared:
 	if (status == 0) {
+		udev->port_is_suspended = 0;
 		if (hub_is_superspeed(hub->hdev)) {
 			if (portchange & USB_PORT_STAT_C_LINK_STATE)
 				clear_port_feature(hub->hdev, port1,
@@ -3126,6 +3167,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 #endif
 
+static int check_ports_changed(struct usb_hub *hub)
+{
+	int port1;
+
+	for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+		u16 portstatus, portchange;
+		int status;
+
+		status = hub_port_status(hub, port1, &portstatus, &portchange);
+		if (!status && portchange)
+			return 1;
+	}
+	return 0;
+}
+
 static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 {
 	struct usb_hub		*hub = usb_get_intfdata (intf);
@@ -3144,6 +3200,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 				return -EBUSY;
 		}
 	}
+
+	if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+		/* check if there are changes pending on hub ports */
+		if (check_ports_changed(hub)) {
+			if (PMSG_IS_AUTO(msg))
+				return -EBUSY;
+			pm_wakeup_event(&hdev->dev, 2000);
+		}
+	}
+
 	if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
 		/* Enable hub to send remote wakeup for all ports. */
 		for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -3972,6 +4038,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
+	if (hcd->phy && !hdev->parent)
+		usb_phy_notify_connect(hcd->phy, udev->speed);
+
 	/*
 	 * Some superspeed devices have finished the link training process
 	 * and attached to a superspeed hub port, but the device descriptor
@@ -4166,8 +4235,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 	}
 
 	/* Disconnect any existing devices under this port */
-	if (udev)
+	if (udev) {
+		if (hcd->phy && !hdev->parent &&
+				!(portstatus & USB_PORT_STAT_CONNECTION))
+			usb_phy_notify_disconnect(hcd->phy, udev->speed);
 		usb_disconnect(&hub->ports[port1 - 1]->child);
+	}
 	clear_bit(port1, hub->change_bits);
 
 	/* We can forget about a "removed" device when there's a physical
@@ -4190,13 +4263,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		}
 	}
 
-	if (hcd->phy && !hdev->parent) {
-		if (portstatus & USB_PORT_STAT_CONNECTION)
-			usb_phy_notify_connect(hcd->phy, port1);
-		else
-			usb_phy_notify_disconnect(hcd->phy, port1);
-	}
-
 	/* Return now if debouncing failed or nothing is connected or
 	 * the device was "removed".
 	 */
@@ -4648,6 +4714,11 @@ static int hub_thread(void *__unused)
 }
 
 static const struct usb_device_id hub_id_table[] = {
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+	           | USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_GENESYS_LOGIC,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,

drivers/usb/core/message.c

@@ -1540,7 +1540,6 @@ static void usb_release_interface(struct device *dev)
 	kfree(intf);
 }
 
-#ifdef	CONFIG_HOTPLUG
 static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
@@ -1575,14 +1574,6 @@ static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-#else
-
-static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	return -ENODEV;
-}
-#endif	/* CONFIG_HOTPLUG */
-
 struct device_type usb_if_device_type = {
 	.name =		"usb_interface",
 	.release =	usb_release_interface,
@@ -1795,7 +1786,8 @@ free_interfaces:
 	if (dev->actconfig && usb_disable_lpm(dev)) {
 		dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
 		mutex_unlock(hcd->bandwidth_mutex);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto free_interfaces;
 	}
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
@@ -1806,29 +1798,8 @@ free_interfaces:
 		goto free_interfaces;
 	}
 
-	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+	/*
-			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+	 * Initialize the new interface structures and the
-			      NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (ret < 0) {
-		/* All the old state is gone, so what else can we do?
-		 * The device is probably useless now anyway.
-		 */
-		cp = NULL;
-	}
-
-	dev->actconfig = cp;
-	if (!cp) {
-		usb_set_device_state(dev, USB_STATE_ADDRESS);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		/* Leave LPM disabled while the device is unconfigured. */
-		mutex_unlock(hcd->bandwidth_mutex);
-		usb_autosuspend_device(dev);
-		goto free_interfaces;
-	}
-	mutex_unlock(hcd->bandwidth_mutex);
-	usb_set_device_state(dev, USB_STATE_CONFIGURED);
-
-	/* Initialize the new interface structures and the
 	 * hc/hcd/usbcore interface/endpoint state.
 	 */
 	for (i = 0; i < nintf; ++i) {
@@ -1872,6 +1843,35 @@ free_interfaces:
 	}
 	kfree(new_interfaces);
 
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
+			      NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0 && cp) {
+		/*
+		 * All the old state is gone, so what else can we do?
+		 * The device is probably useless now anyway.
+		 */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		for (i = 0; i < nintf; ++i) {
+			usb_disable_interface(dev, cp->interface[i], true);
+			put_device(&cp->interface[i]->dev);
+			cp->interface[i] = NULL;
+		}
+		cp = NULL;
+	}
+
+	dev->actconfig = cp;
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	if (!cp) {
+		usb_set_device_state(dev, USB_STATE_ADDRESS);
+
+		/* Leave LPM disabled while the device is unconfigured. */
+		usb_autosuspend_device(dev);
+		return ret;
+	}
+	usb_set_device_state(dev, USB_STATE_CONFIGURED);
+
 	if (cp->string == NULL &&
 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);

drivers/usb/core/urb.c

@@ -214,9 +214,25 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb);
  * urb->interval is modified to reflect the actual transfer period used
  * (normally some power of two units).  And for isochronous urbs,
  * urb->start_frame is modified to reflect when the URB's transfers were
- * scheduled to start.  Not all isochronous transfer scheduling policies
+ * scheduled to start.
- * will work, but most host controller drivers should easily handle ISO
+ *
- * queues going from now until 10-200 msec into the future.
+ * Not all isochronous transfer scheduling policies will work, but most
+ * host controller drivers should easily handle ISO queues going from now
+ * until 10-200 msec into the future.  Drivers should try to keep at
+ * least one or two msec of data in the queue; many controllers require
+ * that new transfers start at least 1 msec in the future when they are
+ * added.  If the driver is unable to keep up and the queue empties out,
+ * the behavior for new submissions is governed by the URB_ISO_ASAP flag.
+ * If the flag is set, or if the queue is idle, then the URB is always
+ * assigned to the first available (and not yet expired) slot in the
+ * endpoint's schedule.  If the flag is not set and the queue is active
+ * then the URB is always assigned to the next slot in the schedule
+ * following the end of the endpoint's previous URB, even if that slot is
+ * in the past.  When a packet is assigned in this way to a slot that has
+ * already expired, the packet is not transmitted and the corresponding
+ * usb_iso_packet_descriptor's status field will return -EXDEV.  If this
+ * would happen to all the packets in the URB, submission fails with a
+ * -EXDEV error code.
  *
  * For control endpoints, the synchronous usb_control_msg() call is
  * often used (in non-interrupt context) instead of this call.
@@ -305,8 +321,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	struct usb_host_endpoint	*ep;
 	int				is_out;
 
-	if (!urb || urb->hcpriv || !urb->complete)
+	if (!urb || !urb->complete)
 		return -EINVAL;
+	if (urb->hcpriv) {
+		WARN_ONCE(1, "URB %p submitted while active\n", urb);
+		return -EBUSY;
+	}
+
 	dev = urb->dev;
 	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
 		return -ENODEV;

drivers/usb/core/usb.c

@@ -233,7 +233,6 @@ static void usb_release_dev(struct device *dev)
 	kfree(udev);
 }
 
-#ifdef	CONFIG_HOTPLUG
 static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
@@ -249,14 +248,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-#else
-
-static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	return -ENODEV;
-}
-#endif	/* CONFIG_HOTPLUG */
-
 #ifdef	CONFIG_PM
 
 /* USB device Power-Management thunks.
@@ -370,14 +361,14 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 				 struct usb_bus *bus, unsigned port1)
 {
 	struct usb_device *dev;
-	struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
+	struct usb_hcd *usb_hcd = bus_to_hcd(bus);
 	unsigned root_hub = 0;
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return NULL;
 
-	if (!usb_get_hcd(bus_to_hcd(bus))) {
+	if (!usb_get_hcd(usb_hcd)) {
 		kfree(dev);
 		return NULL;
 	}

drivers/usb/dwc3/Makefile

@@ -27,19 +27,7 @@ endif
 ##
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3-omap.o
-
+obj-$(CONFIG_USB_DWC3)		+= dwc3-exynos.o
-##
-# REVISIT Samsung Exynos platform needs the clk API which isn't
-# defined on all architectures. If we allow dwc3-exynos.c compile
-# always we will fail the linking phase on those architectures
-# which don't provide clk api implementation and that's unnaceptable.
-#
-# When Samsung's platform start supporting pm_runtime, this check
-# for HAVE_CLK should be removed.
-##
-ifneq ($(CONFIG_HAVE_CLK),)
-	obj-$(CONFIG_USB_DWC3)		+= dwc3-exynos.o
-endif
 
 ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_DWC3)		+= dwc3-pci.o

drivers/usb/dwc3/core.c

@@ -66,45 +66,6 @@ MODULE_PARM_DESC(maximum_speed, "Maximum supported speed.");
 
 /* -------------------------------------------------------------------------- */
 
-#define DWC3_DEVS_POSSIBLE	32
-
-static DECLARE_BITMAP(dwc3_devs, DWC3_DEVS_POSSIBLE);
-
-int dwc3_get_device_id(void)
-{
-	int		id;
-
-again:
-	id = find_first_zero_bit(dwc3_devs, DWC3_DEVS_POSSIBLE);
-	if (id < DWC3_DEVS_POSSIBLE) {
-		int old;
-
-		old = test_and_set_bit(id, dwc3_devs);
-		if (old)
-			goto again;
-	} else {
-		pr_err("dwc3: no space for new device\n");
-		id = -ENOMEM;
-	}
-
-	return id;
-}
-EXPORT_SYMBOL_GPL(dwc3_get_device_id);
-
-void dwc3_put_device_id(int id)
-{
-	int			ret;
-
-	if (id < 0)
-		return;
-
-	ret = test_bit(id, dwc3_devs);
-	WARN(!ret, "dwc3: ID %d not in use\n", id);
-	smp_mb__before_clear_bit();
-	clear_bit(id, dwc3_devs);
-}
-EXPORT_SYMBOL_GPL(dwc3_put_device_id);
-
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
@@ -169,7 +130,6 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
 		struct dwc3_event_buffer *evt)
 {
 	dma_free_coherent(dwc->dev, evt->length, evt->buf, evt->dma);
-	kfree(evt);
 }
 
 /**
@@ -180,12 +140,11 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc,
  * Returns a pointer to the allocated event buffer structure on success
  * otherwise ERR_PTR(errno).
  */
-static struct dwc3_event_buffer *__devinit
+static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
-dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
 {
 	struct dwc3_event_buffer	*evt;
 
-	evt = kzalloc(sizeof(*evt), GFP_KERNEL);
+	evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL);
 	if (!evt)
 		return ERR_PTR(-ENOMEM);
 
@@ -193,10 +152,8 @@ dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length)
 	evt->length	= length;
 	evt->buf	= dma_alloc_coherent(dwc->dev, length,
 			&evt->dma, GFP_KERNEL);
-	if (!evt->buf) {
+	if (!evt->buf)
-		kfree(evt);
 		return ERR_PTR(-ENOMEM);
-	}
 
 	return evt;
 }
@@ -215,8 +172,6 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
 		if (evt)
 			dwc3_free_one_event_buffer(dwc, evt);
 	}
-
-	kfree(dwc->ev_buffs);
 }
 
 /**
@@ -227,7 +182,7 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc)
  * Returns 0 on success otherwise negative errno. In the error case, dwc
  * may contain some buffers allocated but not all which were requested.
  */
-static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
+static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 {
 	int			num;
 	int			i;
@@ -235,7 +190,8 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 	num = DWC3_NUM_INT(dwc->hwparams.hwparams1);
 	dwc->num_event_buffers = num;
 
-	dwc->ev_buffs = kzalloc(sizeof(*dwc->ev_buffs) * num, GFP_KERNEL);
+	dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
+			GFP_KERNEL);
 	if (!dwc->ev_buffs) {
 		dev_err(dwc->dev, "can't allocate event buffers array\n");
 		return -ENOMEM;
@@ -303,7 +259,7 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 	}
 }
 
-static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
+static void dwc3_cache_hwparams(struct dwc3 *dwc)
 {
 	struct dwc3_hwparams	*parms = &dwc->hwparams;
 
@@ -324,7 +280,7 @@ static void __devinit dwc3_cache_hwparams(struct dwc3 *dwc)
  *
  * Returns 0 on success otherwise negative errno.
  */
-static int __devinit dwc3_core_init(struct dwc3 *dwc)
+static int dwc3_core_init(struct dwc3 *dwc)
 {
 	unsigned long		timeout;
 	u32			reg;
@@ -358,8 +314,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_core_soft_reset(dwc);
 
-	dwc3_cache_hwparams(dwc);
-
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
 	reg &= ~DWC3_GCTL_DISSCRAMBLE;
@@ -383,24 +337,14 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
-	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
-	if (ret) {
-		dev_err(dwc->dev, "failed to allocate event buffers\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err1;
+		goto err0;
 	}
 
 	return 0;
 
-err1:
-	dwc3_free_event_buffers(dwc);
-
 err0:
 	return ret;
 }
@@ -408,16 +352,14 @@ err0:
 static void dwc3_core_exit(struct dwc3 *dwc)
 {
 	dwc3_event_buffers_cleanup(dwc);
-	dwc3_free_event_buffers(dwc);
 
 	usb_phy_shutdown(dwc->usb2_phy);
 	usb_phy_shutdown(dwc->usb3_phy);
-
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)
 
-static int __devinit dwc3_probe(struct platform_device *pdev)
+static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
 	struct resource		*res;
@@ -515,10 +457,19 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);
 	pm_runtime_forbid(dev);
 
+	dwc3_cache_hwparams(dwc);
+
+	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
+	if (ret) {
+		dev_err(dwc->dev, "failed to allocate event buffers\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		return ret;
+		goto err0;
 	}
 
 	mode = DWC3_MODE(dwc->hwparams.hwparams0);
@@ -590,10 +541,13 @@ err2:
 err1:
 	dwc3_core_exit(dwc);
 
+err0:
+	dwc3_free_event_buffers(dwc);
+
 	return ret;
 }
 
-static int __devexit dwc3_remove(struct platform_device *pdev)
+static int dwc3_remove(struct platform_device *pdev)
 {
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
 	struct resource	*res;
@@ -628,7 +582,7 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
 
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
-	.remove		= __devexit_p(dwc3_remove),
+	.remove		= dwc3_remove,
 	.driver		= {
 		.name	= "dwc3",
 	},

drivers/usb/dwc3/core.h

@@ -868,7 +868,4 @@ void dwc3_host_exit(struct dwc3 *dwc);
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
 
-extern int dwc3_get_device_id(void);
-extern void dwc3_put_device_id(int id);
-
 #endif /* __DRIVERS_USB_DWC3_CORE_H */

drivers/usb/dwc3/debugfs.c

@@ -652,7 +652,7 @@ static const struct file_operations dwc3_link_state_fops = {
 	.release		= single_release,
 };
 
-int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
+int dwc3_debugfs_init(struct dwc3 *dwc)
 {
 	struct dentry		*root;
 	struct dentry		*file;
@@ -703,7 +703,7 @@ err0:
 	return ret;
 }
 
-void __devexit dwc3_debugfs_exit(struct dwc3 *dwc)
+void dwc3_debugfs_exit(struct dwc3 *dwc)
 {
 	debugfs_remove_recursive(dwc->root);
 	dwc->root = NULL;

drivers/usb/dwc3/dwc3-exynos.c

@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/of.h>
 
 #include "core.h"
 
@@ -33,7 +34,7 @@ struct dwc3_exynos {
 	struct clk		*clk;
 };
 
-static int __devinit dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
+static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos)
 {
 	struct nop_usb_xceiv_platform_data pdata;
 	struct platform_device	*pdev;
@@ -87,14 +88,14 @@ err1:
 	return ret;
 }
 
-static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
+static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
+
+static int dwc3_exynos_probe(struct platform_device *pdev)
 {
-	struct dwc3_exynos_data	*pdata = pdev->dev.platform_data;
 	struct platform_device	*dwc3;
 	struct dwc3_exynos	*exynos;
 	struct clk		*clk;
 
-	int			devid;
 	int			ret = -ENOMEM;
 
 	exynos = kzalloc(sizeof(*exynos), GFP_KERNEL);
@@ -103,11 +104,15 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	platform_set_drvdata(pdev, exynos);
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we move to full device tree support this will vanish off.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &dwc3_exynos_dma_mask;
 
-	devid = dwc3_get_device_id();
+	platform_set_drvdata(pdev, exynos);
-	if (devid < 0)
-		goto err1;
 
 	ret = dwc3_exynos_register_phys(exynos);
 	if (ret) {
@@ -115,10 +120,10 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dwc3 = platform_device_alloc("dwc3", devid);
+	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
 	if (!dwc3) {
 		dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
-		goto err2;
+		goto err1;
 	}
 
 	clk = clk_get(&pdev->dev, "usbdrd30");
@@ -139,14 +144,6 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
 
 	clk_enable(exynos->clk);
 
-	/* PHY initialization */
-	if (!pdata) {
-		dev_dbg(&pdev->dev, "missing platform data\n");
-	} else {
-		if (pdata->phy_init)
-			pdata->phy_init(pdev, pdata->phy_type);
-	}
-
 	ret = platform_device_add_resources(dwc3, pdev->resource,
 			pdev->num_resources);
 	if (ret) {
@@ -163,35 +160,24 @@ static int __devinit dwc3_exynos_probe(struct platform_device *pdev)
 	return 0;
 
 err4:
-	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, pdata->phy_type);
-
 	clk_disable(clk);
 	clk_put(clk);
 err3:
 	platform_device_put(dwc3);
-err2:
-	dwc3_put_device_id(devid);
 err1:
 	kfree(exynos);
 err0:
 	return ret;
 }
 
-static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
+static int dwc3_exynos_remove(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
-	struct dwc3_exynos_data *pdata = pdev->dev.platform_data;
 
 	platform_device_unregister(exynos->dwc3);
 	platform_device_unregister(exynos->usb2_phy);
 	platform_device_unregister(exynos->usb3_phy);
 
-	dwc3_put_device_id(exynos->dwc3->id);
-
-	if (pdata && pdata->phy_exit)
-		pdata->phy_exit(pdev, pdata->phy_type);
-
 	clk_disable(exynos->clk);
 	clk_put(exynos->clk);
 
@@ -200,11 +186,20 @@ static int __devexit dwc3_exynos_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_dwc3_match[] = {
+	{ .compatible = "samsung,exynos-dwc3" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_dwc3_match);
+#endif
+
 static struct platform_driver dwc3_exynos_driver = {
 	.probe		= dwc3_exynos_probe,
-	.remove		= __devexit_p(dwc3_exynos_remove),
+	.remove		= dwc3_exynos_remove,
 	.driver		= {
 		.name	= "exynos-dwc3",
+		.of_match_table = of_match_ptr(exynos_dwc3_match),
 	},
 };
 

drivers/usb/dwc3/dwc3-omap.c

@@ -157,7 +157,7 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
 	writel(value, base + offset);
 }
 
-static int __devinit dwc3_omap_register_phys(struct dwc3_omap *omap)
+static int dwc3_omap_register_phys(struct dwc3_omap *omap)
 {
 	struct nop_usb_xceiv_platform_data pdata;
 	struct platform_device	*pdev;
@@ -262,7 +262,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	return IRQ_HANDLED;
 }
 
-static int __devinit dwc3_omap_probe(struct platform_device *pdev)
+static int dwc3_omap_probe(struct platform_device *pdev)
 {
 	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
 	struct device_node	*node = pdev->dev.of_node;
@@ -272,7 +272,6 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
 
-	int			devid;
 	int			size;
 	int			ret = -ENOMEM;
 	int			irq;
@@ -315,14 +314,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	devid = dwc3_get_device_id();
+	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (devid < 0)
-		return -ENODEV;
-
-	dwc3 = platform_device_alloc("dwc3", devid);
 	if (!dwc3) {
 		dev_err(dev, "couldn't allocate dwc3 device\n");
-		goto err1;
+		return -ENOMEM;
 	}
 
 	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
@@ -423,23 +418,16 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 
 err2:
 	platform_device_put(dwc3);
-
-err1:
-	dwc3_put_device_id(devid);
-
 	return ret;
 }
 
-static int __devexit dwc3_omap_remove(struct platform_device *pdev)
+static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
 
 	platform_device_unregister(omap->dwc3);
 	platform_device_unregister(omap->usb2_phy);
 	platform_device_unregister(omap->usb3_phy);
-
-	dwc3_put_device_id(omap->dwc3->id);
-
 	return 0;
 }
 
@@ -453,7 +441,7 @@ MODULE_DEVICE_TABLE(of, of_dwc3_matach);
 
 static struct platform_driver dwc3_omap_driver = {
 	.probe		= dwc3_omap_probe,
-	.remove		= __devexit_p(dwc3_omap_remove),
+	.remove		= dwc3_omap_remove,
 	.driver		= {
 		.name	= "omap-dwc3",
 		.of_match_table	= of_dwc3_matach,

drivers/usb/dwc3/dwc3-pci.c

@@ -58,7 +58,7 @@ struct dwc3_pci {
 	struct platform_device	*usb3_phy;
 };
 
-static int __devinit dwc3_pci_register_phys(struct dwc3_pci *glue)
+static int dwc3_pci_register_phys(struct dwc3_pci *glue)
 {
 	struct nop_usb_xceiv_platform_data pdata;
 	struct platform_device	*pdev;
@@ -112,14 +112,13 @@ err1:
 	return ret;
 }
 
-static int __devinit dwc3_pci_probe(struct pci_dev *pci,
+static int dwc3_pci_probe(struct pci_dev *pci,
 		const struct pci_device_id *id)
 {
 	struct resource		res[2];
 	struct platform_device	*dwc3;
 	struct dwc3_pci		*glue;
 	int			ret = -ENOMEM;
-	int			devid;
 	struct device		*dev = &pci->dev;
 
 	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -145,13 +144,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 		return ret;
 	}
 
-	devid = dwc3_get_device_id();
+	dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
-	if (devid < 0) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	dwc3 = platform_device_alloc("dwc3", devid);
 	if (!dwc3) {
 		dev_err(dev, "couldn't allocate dwc3 device\n");
 		ret = -ENOMEM;
@@ -172,7 +165,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 	ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
 	if (ret) {
 		dev_err(dev, "couldn't add resources to dwc3 device\n");
-		goto err2;
+		goto err1;
 	}
 
 	pci_set_drvdata(pci, glue);
@@ -195,23 +188,18 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
 err3:
 	pci_set_drvdata(pci, NULL);
 	platform_device_put(dwc3);
-
-err2:
-	dwc3_put_device_id(devid);
-
 err1:
 	pci_disable_device(pci);
 
 	return ret;
 }
 
-static void __devexit dwc3_pci_remove(struct pci_dev *pci)
+static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci	*glue = pci_get_drvdata(pci);
 
 	platform_device_unregister(glue->usb2_phy);
 	platform_device_unregister(glue->usb3_phy);
-	dwc3_put_device_id(glue->dwc3->id);
 	platform_device_unregister(glue->dwc3);
 	pci_set_drvdata(pci, NULL);
 	pci_disable_device(pci);
@@ -230,7 +218,7 @@ static struct pci_driver dwc3_pci_driver = {
 	.name		= "dwc3-pci",
 	.id_table	= dwc3_pci_id_table,
 	.probe		= dwc3_pci_probe,
-	.remove		= __devexit_p(dwc3_pci_remove),
+	.remove		= dwc3_pci_remove,
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");

drivers/usb/dwc3/gadget.c

@@ -1579,7 +1579,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
 
 /* -------------------------------------------------------------------------- */
 
-static int __devinit dwc3_gadget_init_endpoints(struct dwc3 *dwc)
+static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
 {
 	struct dwc3_ep			*dep;
 	u8				epnum;
@@ -2374,7 +2374,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
  *
  * Returns 0 on success otherwise negative errno.
  */
-int __devinit dwc3_gadget_init(struct dwc3 *dwc)
+int dwc3_gadget_init(struct dwc3 *dwc)
 {
 	u32					reg;
 	int					ret;

drivers/usb/early/ehci-dbgp.c

@@ -974,7 +974,7 @@ struct console early_dbgp_console = {
 	.index =	-1,
 };
 
-#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
+#if IS_ENABLED(CONFIG_USB)
 int dbgp_reset_prep(struct usb_hcd *hcd)
 {
 	int ret = xen_dbgp_reset_prep(hcd);
@@ -1008,7 +1008,7 @@ int dbgp_external_startup(struct usb_hcd *hcd)
 	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
 }
 EXPORT_SYMBOL_GPL(dbgp_external_startup);
-#endif /* USB_EHCI_HCD */
+#endif /* USB */
 
 #ifdef CONFIG_KGDB
 

drivers/usb/gadget/Kconfig

@@ -721,31 +721,6 @@ config USB_FUNCTIONFS_GENERIC
 	  Include a configuration with the Function Filesystem alone with
 	  no Ethernet interface.
 
-config USB_FILE_STORAGE
-	tristate "File-backed Storage Gadget (DEPRECATED)"
-	depends on BLOCK
-	help
-	  The File-backed Storage Gadget acts as a USB Mass Storage
-	  disk drive.  As its storage repository it can use a regular
-	  file or a block device (in much the same way as the "loop"
-	  device driver), specified as a module parameter.
-
-	  Say "y" to link the driver statically, or "m" to build a
-	  dynamically linked module called "g_file_storage".
-
-	  NOTE: This driver is deprecated.  Its replacement is the
-	  Mass Storage Gadget.
-
-config USB_FILE_STORAGE_TEST
-	bool "File-backed Storage Gadget testing version"
-	depends on USB_FILE_STORAGE
-	default n
-	help
-	  Say "y" to generate the larger testing version of the
-	  File-backed Storage Gadget, useful for probing the
-	  behavior of USB Mass Storage hosts.  Not needed for
-	  normal operation.
-
 config USB_MASS_STORAGE
 	tristate "Mass Storage Gadget"
 	depends on BLOCK
@@ -756,8 +731,8 @@ config USB_MASS_STORAGE
 	  device (in much the same way as the "loop" device driver),
 	  specified as a module parameter or sysfs option.
 
-	  This driver is an updated replacement for the deprecated
+	  This driver is a replacement for now removed File-backed
-	  File-backed Storage Gadget (g_file_storage).
+	  Storage Gadget (g_file_storage).
 
 	  Say "y" to link the driver statically, or "m" to build
 	  a dynamically linked module called "g_mass_storage".

drivers/usb/gadget/Makefile

@@ -44,7 +44,6 @@ g_ether-y			:= ether.o
 g_serial-y			:= serial.o
 g_midi-y			:= gmidi.o
 gadgetfs-y			:= inode.o
-g_file_storage-y		:= file_storage.o
 g_mass_storage-y		:= mass_storage.o
 g_printer-y			:= printer.o
 g_cdc-y				:= cdc2.o
@@ -62,7 +61,6 @@ obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
 obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
 obj-$(CONFIG_USB_FUNCTIONFS)	+= g_ffs.o
-obj-$(CONFIG_USB_FILE_STORAGE)	+= g_file_storage.o
 obj-$(CONFIG_USB_MASS_STORAGE)	+= g_mass_storage.o
 obj-$(CONFIG_USB_G_SERIAL)	+= g_serial.o
 obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o

drivers/usb/gadget/at91_udc.c

@@ -1673,7 +1673,7 @@ static void at91udc_shutdown(struct platform_device *dev)
 	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static void __devinit at91udc_of_init(struct at91_udc *udc,
+static void at91udc_of_init(struct at91_udc *udc,
 				     struct device_node *np)
 {
 	struct at91_udc_data *board = &udc->board;
@@ -1693,7 +1693,7 @@ static void __devinit at91udc_of_init(struct at91_udc *udc,
 	board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
 }
 
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int at91udc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	struct at91_udc	*udc;

drivers/usb/gadget/bcm63xx_udc.c

@@ -2323,7 +2323,7 @@ static void bcm63xx_udc_gadget_release(struct device *dev)
  * Note that platform data is required, because pd.port_no varies from chip
  * to chip and is used to switch the correct USB port to device mode.
  */
-static int __devinit bcm63xx_udc_probe(struct platform_device *pdev)
+static int bcm63xx_udc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct bcm63xx_usbd_platform_data *pd = dev->platform_data;
@@ -2433,7 +2433,7 @@ out_uninit:
  * bcm63xx_udc_remove - Remove the device from the system.
  * @pdev: Platform device struct from the bcm63xx BSP code.
  */
-static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
+static int bcm63xx_udc_remove(struct platform_device *pdev)
 {
 	struct bcm63xx_udc *udc = platform_get_drvdata(pdev);
 
@@ -2450,7 +2450,7 @@ static int __devexit bcm63xx_udc_remove(struct platform_device *pdev)
 
 static struct platform_driver bcm63xx_udc_driver = {
 	.probe		= bcm63xx_udc_probe,
-	.remove		= __devexit_p(bcm63xx_udc_remove),
+	.remove		= bcm63xx_udc_remove,
 	.driver		= {
 		.name	= DRV_MODULE_NAME,
 		.owner	= THIS_MODULE,

drivers/usb/gadget/composite.c

@@ -107,7 +107,7 @@ int config_ep_by_speed(struct usb_gadget *g,
 		}
 		/* else: fall through */
 	default:
-		speed_desc = f->descriptors;
+		speed_desc = f->fs_descriptors;
 	}
 	/* find descriptors */
 	for_each_ep_desc(speed_desc, d_spd) {
@@ -200,7 +200,7 @@ int usb_add_function(struct usb_configuration *config,
 	 * as full speed ... it's the function drivers that will need
 	 * to avoid bulk and ISO transfers.
 	 */
-	if (!config->fullspeed && function->descriptors)
+	if (!config->fullspeed && function->fs_descriptors)
 		config->fullspeed = true;
 	if (!config->highspeed && function->hs_descriptors)
 		config->highspeed = true;
@@ -363,7 +363,7 @@ static int config_buf(struct usb_configuration *config,
 			descriptors = f->hs_descriptors;
 			break;
 		default:
-			descriptors = f->descriptors;
+			descriptors = f->fs_descriptors;
 		}
 
 		if (!descriptors)
@@ -620,7 +620,7 @@ static int set_config(struct usb_composite_dev *cdev,
 			descriptors = f->hs_descriptors;
 			break;
 		default:
-			descriptors = f->descriptors;
+			descriptors = f->fs_descriptors;
 		}
 
 		for (; *descriptors; ++descriptors) {

drivers/usb/gadget/config.c

@@ -19,7 +19,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
-
+#include <linux/usb/composite.h>
 
 /**
  * usb_descriptor_fillbuf - fill buffer with descriptors
@@ -158,3 +158,40 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_copy_descriptors);
+
+int usb_assign_descriptors(struct usb_function *f,
+		struct usb_descriptor_header **fs,
+		struct usb_descriptor_header **hs,
+		struct usb_descriptor_header **ss)
+{
+	struct usb_gadget *g = f->config->cdev->gadget;
+
+	if (fs) {
+		f->fs_descriptors = usb_copy_descriptors(fs);
+		if (!f->fs_descriptors)
+			goto err;
+	}
+	if (hs && gadget_is_dualspeed(g)) {
+		f->hs_descriptors = usb_copy_descriptors(hs);
+		if (!f->hs_descriptors)
+			goto err;
+	}
+	if (ss && gadget_is_superspeed(g)) {
+		f->ss_descriptors = usb_copy_descriptors(ss);
+		if (!f->ss_descriptors)
+			goto err;
+	}
+	return 0;
+err:
+	usb_free_all_descriptors(f);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_assign_descriptors);
+
+void usb_free_all_descriptors(struct usb_function *f)
+{
+	usb_free_descriptors(f->fs_descriptors);
+	usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->ss_descriptors);
+}
+EXPORT_SYMBOL_GPL(usb_free_all_descriptors);

drivers/usb/gadget/dummy_hcd.c

@@ -63,16 +63,20 @@ MODULE_LICENSE("GPL");
 struct dummy_hcd_module_parameters {
 	bool is_super_speed;
 	bool is_high_speed;
+	unsigned int num;
 };
 
 static struct dummy_hcd_module_parameters mod_data = {
 	.is_super_speed = false,
 	.is_high_speed = true,
+	.num = 1,
 };
 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
 module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
 MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
+module_param_named(num, mod_data.num, uint, S_IRUGO);
+MODULE_PARM_DESC(num, "number of emulated controllers");
 /*-------------------------------------------------------------------------*/
 
 /* gadget side driver data structres */
@@ -238,8 +242,6 @@ static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
 	return container_of(dev, struct dummy, gadget.dev);
 }
 
-static struct dummy			the_controller;
-
 /*-------------------------------------------------------------------------*/
 
 /* SLAVE/GADGET SIDE UTILITY ROUTINES */
@@ -973,9 +975,10 @@ static void init_dummy_udc_hw(struct dummy *dum)
 
 static int dummy_udc_probe(struct platform_device *pdev)
 {
-	struct dummy	*dum = &the_controller;
+	struct dummy	*dum;
 	int		rc;
 
+	dum = *((void **)dev_get_platdata(&pdev->dev));
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.max_speed = USB_SPEED_SUPER;
@@ -2398,10 +2401,13 @@ static int dummy_h_get_frame(struct usb_hcd *hcd)
 
 static int dummy_setup(struct usb_hcd *hcd)
 {
+	struct dummy *dum;
+
+	dum = *((void **)dev_get_platdata(hcd->self.controller));
 	hcd->self.sg_tablesize = ~0;
 	if (usb_hcd_is_primary_hcd(hcd)) {
-		the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
+		dum->hs_hcd = hcd_to_dummy_hcd(hcd);
-		the_controller.hs_hcd->dum = &the_controller;
+		dum->hs_hcd->dum = dum;
 		/*
 		 * Mark the first roothub as being USB 2.0.
 		 * The USB 3.0 roothub will be registered later by
@@ -2410,8 +2416,8 @@ static int dummy_setup(struct usb_hcd *hcd)
 		hcd->speed = HCD_USB2;
 		hcd->self.root_hub->speed = USB_SPEED_HIGH;
 	} else {
-		the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
+		dum->ss_hcd = hcd_to_dummy_hcd(hcd);
-		the_controller.ss_hcd->dum = &the_controller;
+		dum->ss_hcd->dum = dum;
 		hcd->speed = HCD_USB3;
 		hcd->self.root_hub->speed = USB_SPEED_SUPER;
 	}
@@ -2524,11 +2530,13 @@ static struct hc_driver dummy_hcd = {
 
 static int dummy_hcd_probe(struct platform_device *pdev)
 {
+	struct dummy		*dum;
 	struct usb_hcd		*hs_hcd;
 	struct usb_hcd		*ss_hcd;
 	int			retval;
 
 	dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+	dum = *((void **)dev_get_platdata(&pdev->dev));
 
 	if (!mod_data.is_super_speed)
 		dummy_hcd.flags = HCD_USB2;
@@ -2561,7 +2569,7 @@ dealloc_usb2_hcd:
 	usb_remove_hcd(hs_hcd);
 put_usb2_hcd:
 	usb_put_hcd(hs_hcd);
-	the_controller.hs_hcd = the_controller.ss_hcd = NULL;
+	dum->hs_hcd = dum->ss_hcd = NULL;
 	return retval;
 }
 
@@ -2579,8 +2587,8 @@ static int dummy_hcd_remove(struct platform_device *pdev)
 	usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
 	usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
 
-	the_controller.hs_hcd = NULL;
+	dum->hs_hcd = NULL;
-	the_controller.ss_hcd = NULL;
+	dum->ss_hcd = NULL;
 
 	return 0;
 }
@@ -2627,13 +2635,15 @@ static struct platform_driver dummy_hcd_driver = {
 };
 
 /*-------------------------------------------------------------------------*/
-
+#define MAX_NUM_UDC	2
-static struct platform_device *the_udc_pdev;
+static struct platform_device *the_udc_pdev[MAX_NUM_UDC];
-static struct platform_device *the_hcd_pdev;
+static struct platform_device *the_hcd_pdev[MAX_NUM_UDC];
 
 static int __init init(void)
 {
 	int	retval = -ENOMEM;
+	int	i;
+	struct	dummy *dum[MAX_NUM_UDC];
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -2641,65 +2651,129 @@ static int __init init(void)
 	if (!mod_data.is_high_speed && mod_data.is_super_speed)
 		return -EINVAL;
 
-	the_hcd_pdev = platform_device_alloc(driver_name, -1);
+	if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
-	if (!the_hcd_pdev)
+		pr_err("Number of emulated UDC must be in range of 1…%d\n",
+				MAX_NUM_UDC);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < mod_data.num; i++) {
+		the_hcd_pdev[i] = platform_device_alloc(driver_name, i);
+		if (!the_hcd_pdev[i]) {
+			i--;
+			while (i >= 0)
+				platform_device_put(the_hcd_pdev[i--]);
 			return retval;
-	the_udc_pdev = platform_device_alloc(gadget_name, -1);
+		}
-	if (!the_udc_pdev)
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		the_udc_pdev[i] = platform_device_alloc(gadget_name, i);
+		if (!the_udc_pdev[i]) {
+			i--;
+			while (i >= 0)
+				platform_device_put(the_udc_pdev[i--]);
 			goto err_alloc_udc;
+		}
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
+		if (!dum[i])
+			goto err_add_pdata;
+		retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
+				sizeof(void *));
+		if (retval)
+			goto err_add_pdata;
+		retval = platform_device_add_data(the_udc_pdev[i], &dum[i],
+				sizeof(void *));
+		if (retval)
+			goto err_add_pdata;
+	}
 
 	retval = platform_driver_register(&dummy_hcd_driver);
 	if (retval < 0)
-		goto err_register_hcd_driver;
+		goto err_add_pdata;
 	retval = platform_driver_register(&dummy_udc_driver);
 	if (retval < 0)
 		goto err_register_udc_driver;
 
-	retval = platform_device_add(the_hcd_pdev);
+	for (i = 0; i < mod_data.num; i++) {
-	if (retval < 0)
+		retval = platform_device_add(the_hcd_pdev[i]);
+		if (retval < 0) {
+			i--;
+			while (i >= 0)
+				platform_device_del(the_hcd_pdev[i--]);
 			goto err_add_hcd;
-	if (!the_controller.hs_hcd ||
+		}
-	    (!the_controller.ss_hcd && mod_data.is_super_speed)) {
+	}
+	for (i = 0; i < mod_data.num; i++) {
+		if (!dum[i]->hs_hcd ||
+				(!dum[i]->ss_hcd && mod_data.is_super_speed)) {
 			/*
-		 * The hcd was added successfully but its probe function failed
+			 * The hcd was added successfully but its probe
-		 * for some reason.
+			 * function failed for some reason.
 			 */
 			retval = -EINVAL;
 			goto err_add_udc;
 		}
-	retval = platform_device_add(the_udc_pdev);
+	}
-	if (retval < 0)
+
+	for (i = 0; i < mod_data.num; i++) {
+		retval = platform_device_add(the_udc_pdev[i]);
+		if (retval < 0) {
+			i--;
+			while (i >= 0)
+				platform_device_del(the_udc_pdev[i]);
 			goto err_add_udc;
-	if (!platform_get_drvdata(the_udc_pdev)) {
+		}
+	}
+
+	for (i = 0; i < mod_data.num; i++) {
+		if (!platform_get_drvdata(the_udc_pdev[i])) {
 			/*
-		 * The udc was added successfully but its probe function failed
+			 * The udc was added successfully but its probe
-		 * for some reason.
+			 * function failed for some reason.
 			 */
 			retval = -EINVAL;
 			goto err_probe_udc;
 		}
+	}
 	return retval;
 
 err_probe_udc:
-	platform_device_del(the_udc_pdev);
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_del(the_udc_pdev[i]);
 err_add_udc:
-	platform_device_del(the_hcd_pdev);
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_del(the_hcd_pdev[i]);
 err_add_hcd:
 	platform_driver_unregister(&dummy_udc_driver);
 err_register_udc_driver:
 	platform_driver_unregister(&dummy_hcd_driver);
-err_register_hcd_driver:
+err_add_pdata:
-	platform_device_put(the_udc_pdev);
+	for (i = 0; i < mod_data.num; i++)
+		kfree(dum[i]);
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_put(the_udc_pdev[i]);
 err_alloc_udc:
-	platform_device_put(the_hcd_pdev);
+	for (i = 0; i < mod_data.num; i++)
+		platform_device_put(the_hcd_pdev[i]);
 	return retval;
 }
 module_init(init);
 
 static void __exit cleanup(void)
 {
-	platform_device_unregister(the_udc_pdev);
+	int i;
-	platform_device_unregister(the_hcd_pdev);
+
+	for (i = 0; i < mod_data.num; i++) {
+		struct dummy *dum;
+
+		dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev));
+
+		platform_device_unregister(the_udc_pdev[i]);
+		platform_device_unregister(the_hcd_pdev[i]);
+		kfree(dum);
+	}
 	platform_driver_unregister(&dummy_udc_driver);
 	platform_driver_unregister(&dummy_hcd_driver);
 }

drivers/usb/gadget/f_acm.c

@@ -87,7 +87,7 @@ static inline struct f_acm *port_to_acm(struct gserial *p)
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
-#define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
+#define GS_NOTIFY_INTERVAL_MS		32
 #define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
 
 /* interface and class descriptors: */
@@ -167,7 +167,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc = {
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
 	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
-	.bInterval =		1 << GS_LOG2_NOTIFY_INTERVAL,
+	.bInterval =		GS_NOTIFY_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor acm_fs_in_desc = {
@@ -199,14 +199,13 @@ static struct usb_descriptor_header *acm_fs_function[] = {
 };
 
 /* high speed support: */
-
 static struct usb_endpoint_descriptor acm_hs_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
 	.wMaxPacketSize =	cpu_to_le16(GS_NOTIFY_MAXPACKET),
-	.bInterval =		GS_LOG2_NOTIFY_INTERVAL+4,
+	.bInterval =		USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
 };
 
 static struct usb_endpoint_descriptor acm_hs_in_desc = {
@@ -659,37 +658,22 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	acm->notify_req->complete = acm_cdc_notify_complete;
 	acm->notify_req->context = acm;
 
-	/* copy descriptors */
-	f->descriptors = usb_copy_descriptors(acm_fs_function);
-	if (!f->descriptors)
-		goto fail;
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
 	 */
-	if (gadget_is_dualspeed(c->cdev->gadget)) {
+	acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
-		acm_hs_in_desc.bEndpointAddress =
+	acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
-				acm_fs_in_desc.bEndpointAddress;
-		acm_hs_out_desc.bEndpointAddress =
-				acm_fs_out_desc.bEndpointAddress;
 	acm_hs_notify_desc.bEndpointAddress =
 		acm_fs_notify_desc.bEndpointAddress;
 
-		/* copy descriptors */
+	acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
-		f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
+	acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
-	}
-	if (gadget_is_superspeed(c->cdev->gadget)) {
-		acm_ss_in_desc.bEndpointAddress =
-			acm_fs_in_desc.bEndpointAddress;
-		acm_ss_out_desc.bEndpointAddress =
-			acm_fs_out_desc.bEndpointAddress;
 
-		/* copy descriptors, and track endpoint copies */
+	status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
-		f->ss_descriptors = usb_copy_descriptors(acm_ss_function);
+			acm_ss_function);
-		if (!f->ss_descriptors)
+	if (status)
 		goto fail;
-	}
 
 	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
 			acm->port_num,
@@ -721,11 +705,8 @@ acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct f_acm		*acm = func_to_acm(f);
 
-	if (gadget_is_dualspeed(c->cdev->gadget))
+	acm_string_defs[0].id = 0;
-		usb_free_descriptors(f->hs_descriptors);
+	usb_free_all_descriptors(f);
-	if (gadget_is_superspeed(c->cdev->gadget))
-		usb_free_descriptors(f->ss_descriptors);
-	usb_free_descriptors(f->descriptors);
 	gs_free_req(acm->notify, acm->notify_req);
 	kfree(acm);
 }
@@ -762,27 +743,15 @@ int acm_bind_config(struct usb_configuration *c, u8 port_num)
 	 */
 
 	/* maybe allocate device-global string IDs, and patch descriptors */
-	if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
+	if (acm_string_defs[0].id == 0) {
-		status = usb_string_id(c->cdev);
+		status = usb_string_ids_tab(c->cdev, acm_string_defs);
 		if (status < 0)
 			return status;
-		acm_string_defs[ACM_CTRL_IDX].id = status;
+		acm_control_interface_desc.iInterface =
-
+			acm_string_defs[ACM_CTRL_IDX].id;
-		acm_control_interface_desc.iInterface = status;
+		acm_data_interface_desc.iInterface =
-
+			acm_string_defs[ACM_DATA_IDX].id;
-		status = usb_string_id(c->cdev);
+		acm_iad_descriptor.iFunction = acm_string_defs[ACM_IAD_IDX].id;
-		if (status < 0)
-			return status;
-		acm_string_defs[ACM_DATA_IDX].id = status;
-
-		acm_data_interface_desc.iInterface = status;
-
-		status = usb_string_id(c->cdev);
-		if (status < 0)
-			return status;
-		acm_string_defs[ACM_IAD_IDX].id = status;
-
-		acm_iad_descriptor.iFunction = status;
 	}
 
 	/* allocate and initialize one new instance */

drivers/usb/gadget/f_ecm.c

@@ -91,7 +91,7 @@ static inline unsigned ecm_bitrate(struct usb_gadget *g)
  * encapsulated commands (vendor-specific, using control-OUT).
  */
 
-#define LOG2_STATUS_INTERVAL_MSEC	5	/* 1 << 5 == 32 msec */
+#define ECM_STATUS_INTERVAL_MS		32
 #define ECM_STATUS_BYTECOUNT		16	/* 8 byte header + data */
 
 
@@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc = {
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
 	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
-	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
+	.bInterval =		ECM_STATUS_INTERVAL_MS,
 };
 
 static struct usb_endpoint_descriptor fs_ecm_in_desc = {
@@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
 	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
-	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+	.bInterval =		USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
 };
 
 static struct usb_endpoint_descriptor hs_ecm_in_desc = {
@@ -288,7 +288,7 @@ static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_INT,
 	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
-	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+	.bInterval =		USB_MS_TO_HS_INTERVAL(ECM_STATUS_INTERVAL_MS),
 };
 
 static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
@@ -330,6 +330,7 @@ static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
 
 static struct usb_descriptor_header *ecm_ss_function[] = {
 	/* CDC ECM control descriptors */
+	(struct usb_descriptor_header *) &ecm_iad_descriptor,
 	(struct usb_descriptor_header *) &ecm_control_intf,
 	(struct usb_descriptor_header *) &ecm_header_desc,
 	(struct usb_descriptor_header *) &ecm_union_desc,
@@ -353,7 +354,7 @@ static struct usb_descriptor_header *ecm_ss_function[] = {
 
 static struct usb_string ecm_string_defs[] = {
 	[0].s = "CDC Ethernet Control Model (ECM)",
-	[1].s = NULL /* DYNAMIC */,
+	[1].s = "",
 	[2].s = "CDC Ethernet Data",
 	[3].s = "CDC ECM",
 	{  } /* end of list */
@@ -742,42 +743,24 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	ecm->notify_req->context = ecm;
 	ecm->notify_req->complete = ecm_notify_complete;
 
-	/* copy descriptors, and track endpoint copies */
-	f->descriptors = usb_copy_descriptors(ecm_fs_function);
-	if (!f->descriptors)
-		goto fail;
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
 	 */
-	if (gadget_is_dualspeed(c->cdev->gadget)) {
+	hs_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
-		hs_ecm_in_desc.bEndpointAddress =
+	hs_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
-				fs_ecm_in_desc.bEndpointAddress;
-		hs_ecm_out_desc.bEndpointAddress =
-				fs_ecm_out_desc.bEndpointAddress;
 	hs_ecm_notify_desc.bEndpointAddress =
 		fs_ecm_notify_desc.bEndpointAddress;
 
-		/* copy descriptors, and track endpoint copies */
+	ss_ecm_in_desc.bEndpointAddress = fs_ecm_in_desc.bEndpointAddress;
-		f->hs_descriptors = usb_copy_descriptors(ecm_hs_function);
+	ss_ecm_out_desc.bEndpointAddress = fs_ecm_out_desc.bEndpointAddress;
-		if (!f->hs_descriptors)
-			goto fail;
-	}
-
-	if (gadget_is_superspeed(c->cdev->gadget)) {
-		ss_ecm_in_desc.bEndpointAddress =
-				fs_ecm_in_desc.bEndpointAddress;
-		ss_ecm_out_desc.bEndpointAddress =
-				fs_ecm_out_desc.bEndpointAddress;
 	ss_ecm_notify_desc.bEndpointAddress =
 		fs_ecm_notify_desc.bEndpointAddress;
 
-		/* copy descriptors, and track endpoint copies */
+	status = usb_assign_descriptors(f, ecm_fs_function, ecm_hs_function,
-		f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
+			ecm_ss_function);
-		if (!f->ss_descriptors)
+	if (status)
 		goto fail;
-	}
 
 	/* NOTE:  all that is done without knowing or caring about
 	 * the network link ... which is unavailable to this code
@@ -795,11 +778,6 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	if (f->descriptors)
-		usb_free_descriptors(f->descriptors);
-	if (f->hs_descriptors)
-		usb_free_descriptors(f->hs_descriptors);
-
 	if (ecm->notify_req) {
 		kfree(ecm->notify_req->buf);
 		usb_ep_free_request(ecm->notify, ecm->notify_req);
@@ -808,9 +786,9 @@ fail:
 	/* we might as well release our claims on endpoints */
 	if (ecm->notify)
 		ecm->notify->driver_data = NULL;
-	if (ecm->port.out_ep->desc)
+	if (ecm->port.out_ep)
 		ecm->port.out_ep->driver_data = NULL;
-	if (ecm->port.in_ep->desc)
+	if (ecm->port.in_ep)
 		ecm->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -825,16 +803,11 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(c->cdev, "ecm unbind\n");
 
-	if (gadget_is_superspeed(c->cdev->gadget))
+	ecm_string_defs[0].id = 0;
-		usb_free_descriptors(f->ss_descriptors);
+	usb_free_all_descriptors(f);
-	if (gadget_is_dualspeed(c->cdev->gadget))
-		usb_free_descriptors(f->hs_descriptors);
-	usb_free_descriptors(f->descriptors);
 
 	kfree(ecm->notify_req->buf);
 	usb_ep_free_request(ecm->notify, ecm->notify_req);
-
-	ecm_string_defs[1].s = NULL;
 	kfree(ecm);
 }
 
@@ -859,36 +832,15 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 	if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
 		return -EINVAL;
 
-	/* maybe allocate device-global string IDs */
 	if (ecm_string_defs[0].id == 0) {
-
+		status = usb_string_ids_tab(c->cdev, ecm_string_defs);
-		/* control interface label */
+		if (status)
-		status = usb_string_id(c->cdev);
-		if (status < 0)
 			return status;
-		ecm_string_defs[0].id = status;
-		ecm_control_intf.iInterface = status;
 
-		/* data interface label */
+		ecm_control_intf.iInterface = ecm_string_defs[0].id;
-		status = usb_string_id(c->cdev);
+		ecm_data_intf.iInterface = ecm_string_defs[2].id;
-		if (status < 0)
+		ecm_desc.iMACAddress = ecm_string_defs[1].id;
-			return status;
+		ecm_iad_descriptor.iFunction = ecm_string_defs[3].id;
-		ecm_string_defs[2].id = status;
-		ecm_data_intf.iInterface = status;
-
-		/* MAC address */
-		status = usb_string_id(c->cdev);
-		if (status < 0)
-			return status;
-		ecm_string_defs[1].id = status;
-		ecm_desc.iMACAddress = status;
-
-		/* IAD label */
-		status = usb_string_id(c->cdev);
-		if (status < 0)
-			return status;
-		ecm_string_defs[3].id = status;
-		ecm_iad_descriptor.iFunction = status;
 	}
 
 	/* allocate and initialize one new instance */
@@ -913,9 +865,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 	ecm->port.func.disable = ecm_disable;
 
 	status = usb_add_function(c, &ecm->port.func);
-	if (status) {
+	if (status)
-		ecm_string_defs[1].s = NULL;
 		kfree(ecm);
-	}
 	return status;
 }

drivers/usb/gadget/f_eem.c

@@ -274,38 +274,20 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 
 	status = -ENOMEM;
 
-	/* copy descriptors, and track endpoint copies */
-	f->descriptors = usb_copy_descriptors(eem_fs_function);
-	if (!f->descriptors)
-		goto fail;
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
 	 */
-	if (gadget_is_dualspeed(c->cdev->gadget)) {
+	eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
-		eem_hs_in_desc.bEndpointAddress =
+	eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
-				eem_fs_in_desc.bEndpointAddress;
-		eem_hs_out_desc.bEndpointAddress =
-				eem_fs_out_desc.bEndpointAddress;
 
-		/* copy descriptors, and track endpoint copies */
+	eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress;
-		f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
+	eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress;
-		if (!f->hs_descriptors)
+
+	status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function,
+			eem_ss_function);
+	if (status)
 		goto fail;
-	}
-
-	if (gadget_is_superspeed(c->cdev->gadget)) {
-		eem_ss_in_desc.bEndpointAddress =
-				eem_fs_in_desc.bEndpointAddress;
-		eem_ss_out_desc.bEndpointAddress =
-				eem_fs_out_desc.bEndpointAddress;
-
-		/* copy descriptors, and track endpoint copies */
-		f->ss_descriptors = usb_copy_descriptors(eem_ss_function);
-		if (!f->ss_descriptors)
-			goto fail;
-	}
 
 	DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
 			gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -314,15 +296,10 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
-	if (f->descriptors)
+	usb_free_all_descriptors(f);
-		usb_free_descriptors(f->descriptors);
+	if (eem->port.out_ep)
-	if (f->hs_descriptors)
-		usb_free_descriptors(f->hs_descriptors);
-
-	/* we might as well release our claims on endpoints */
-	if (eem->port.out_ep->desc)
 		eem->port.out_ep->driver_data = NULL;
-	if (eem->port.in_ep->desc)
+	if (eem->port.in_ep)
 		eem->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -337,11 +314,7 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(c->cdev, "eem unbind\n");
 
-	if (gadget_is_superspeed(c->cdev->gadget))
+	usb_free_all_descriptors(f);
-		usb_free_descriptors(f->ss_descriptors);
-	if (gadget_is_dualspeed(c->cdev->gadget))
-		usb_free_descriptors(f->hs_descriptors);
-	usb_free_descriptors(f->descriptors);
 	kfree(eem);
 }
 

drivers/usb/gadget/f_fs.c

@@ -2097,7 +2097,7 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	if (isHS)
 		func->function.hs_descriptors[(long)valuep] = desc;
 	else
-		func->function.descriptors[(long)valuep]    = desc;
+		func->function.fs_descriptors[(long)valuep]    = desc;
 
 	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
 		return 0;
@@ -2249,7 +2249,7 @@ static int ffs_func_bind(struct usb_configuration *c,
 	 * numbers without worrying that it may be described later on.
 	 */
 	if (likely(full)) {
-		func->function.descriptors = data->fs_descs;
+		func->function.fs_descriptors = data->fs_descs;
 		ret = ffs_do_descs(ffs->fs_descs_count,
 				   data->raw_descs,
 				   sizeof data->raw_descs,

drivers/usb/gadget/f_hid.c

@@ -573,7 +573,6 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 		goto fail;
 	hidg_interface_desc.bInterfaceNumber = status;
 
-
 	/* allocate instance-specific endpoints */
 	status = -ENODEV;
 	ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc);
@@ -609,20 +608,15 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	hidg_desc.desc[0].wDescriptorLength =
 		cpu_to_le16(hidg->report_desc_length);
 
-	/* copy descriptors */
-	f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
-	if (!f->descriptors)
-		goto fail;
-
-	if (gadget_is_dualspeed(c->cdev->gadget)) {
 	hidg_hs_in_ep_desc.bEndpointAddress =
 		hidg_fs_in_ep_desc.bEndpointAddress;
 	hidg_hs_out_ep_desc.bEndpointAddress =
 		hidg_fs_out_ep_desc.bEndpointAddress;
-		f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
+
-		if (!f->hs_descriptors)
+	status = usb_assign_descriptors(f, hidg_fs_descriptors,
+			hidg_hs_descriptors, NULL);
+	if (status)
 		goto fail;
-	}
 
 	mutex_init(&hidg->lock);
 	spin_lock_init(&hidg->spinlock);
@@ -649,9 +643,7 @@ fail:
 			usb_ep_free_request(hidg->in_ep, hidg->req);
 	}
 
-	usb_free_descriptors(f->hs_descriptors);
+	usb_free_all_descriptors(f);
-	usb_free_descriptors(f->descriptors);
-
 	return status;
 }
 
@@ -668,9 +660,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
 	kfree(hidg->req->buf);
 	usb_ep_free_request(hidg->in_ep, hidg->req);
 
-	/* free descriptors copies */
+	usb_free_all_descriptors(f);
-	usb_free_descriptors(f->hs_descriptors);
-	usb_free_descriptors(f->descriptors);
 
 	kfree(hidg->report_desc);
 	kfree(hidg);

drivers/usb/gadget/f_loopback.c

@@ -177,6 +177,7 @@ loopback_bind(struct usb_configuration *c, struct usb_function *f)
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_loopback	*loop = func_to_loop(f);
 	int			id;
+	int ret;
 
 	/* allocate interface ID(s) */
 	id = usb_interface_id(c, f);
@@ -201,22 +202,19 @@ autoconf_fail:
 	loop->out_ep->driver_data = cdev;	/* claim */
 
 	/* support high speed hardware */
-	if (gadget_is_dualspeed(c->cdev->gadget)) {
 	hs_loop_source_desc.bEndpointAddress =
 		fs_loop_source_desc.bEndpointAddress;
-		hs_loop_sink_desc.bEndpointAddress =
+	hs_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
-				fs_loop_sink_desc.bEndpointAddress;
-		f->hs_descriptors = hs_loopback_descs;
-	}
 
 	/* support super speed hardware */
-	if (gadget_is_superspeed(c->cdev->gadget)) {
 	ss_loop_source_desc.bEndpointAddress =
 		fs_loop_source_desc.bEndpointAddress;
-		ss_loop_sink_desc.bEndpointAddress =
+	ss_loop_sink_desc.bEndpointAddress = fs_loop_sink_desc.bEndpointAddress;
-				fs_loop_sink_desc.bEndpointAddress;
+
-		f->ss_descriptors = ss_loopback_descs;
+	ret = usb_assign_descriptors(f, fs_loopback_descs, hs_loopback_descs,
-	}
+			ss_loopback_descs);
+	if (ret)
+		return ret;
 
 	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
 	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
@@ -228,6 +226,7 @@ autoconf_fail:
 static void
 loopback_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+	usb_free_all_descriptors(f);
 	kfree(func_to_loop(f));
 }
 
@@ -379,7 +378,6 @@ static int __init loopback_bind_config(struct usb_configuration *c)
 		return -ENOMEM;
 
 	loop->function.name = "loopback";
-	loop->function.descriptors = fs_loopback_descs;
 	loop->function.bind = loopback_bind;
 	loop->function.unbind = loopback_unbind;
 	loop->function.set_alt = loopback_set_alt;

drivers/usb/gadget/f_mass_storage.c

@@ -228,10 +228,6 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-#define FSG_NO_DEVICE_STRINGS    1
-#define FSG_NO_OTG               1
-#define FSG_NO_INTR_EP           1
-
 #include "storage_common.c"
 
 
@@ -2904,9 +2900,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 	}
 
 	fsg_common_put(common);
-	usb_free_descriptors(fsg->function.descriptors);
+	usb_free_all_descriptors(&fsg->function);
-	usb_free_descriptors(fsg->function.hs_descriptors);
-	usb_free_descriptors(fsg->function.ss_descriptors);
 	kfree(fsg);
 }
 
@@ -2916,6 +2910,8 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 	struct usb_gadget	*gadget = c->cdev->gadget;
 	int			i;
 	struct usb_ep		*ep;
+	unsigned		max_burst;
+	int			ret;
 
 	fsg->gadget = gadget;
 
@@ -2939,26 +2935,11 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 	ep->driver_data = fsg->common;	/* claim the endpoint */
 	fsg->bulk_out = ep;
 
-	/* Copy descriptors */
-	f->descriptors = usb_copy_descriptors(fsg_fs_function);
-	if (unlikely(!f->descriptors))
-		return -ENOMEM;
-
-	if (gadget_is_dualspeed(gadget)) {
 	/* Assume endpoint addresses are the same for both speeds */
 	fsg_hs_bulk_in_desc.bEndpointAddress =
 		fsg_fs_bulk_in_desc.bEndpointAddress;
 	fsg_hs_bulk_out_desc.bEndpointAddress =
 		fsg_fs_bulk_out_desc.bEndpointAddress;
-		f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
-		if (unlikely(!f->hs_descriptors)) {
-			usb_free_descriptors(f->descriptors);
-			return -ENOMEM;
-		}
-	}
-
-	if (gadget_is_superspeed(gadget)) {
-		unsigned	max_burst;
 
 	/* Calculate bMaxBurst, we know packet size is 1024 */
 	max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15);
@@ -2971,13 +2952,10 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 		fsg_fs_bulk_out_desc.bEndpointAddress;
 	fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
 
-		f->ss_descriptors = usb_copy_descriptors(fsg_ss_function);
+	ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function,
-		if (unlikely(!f->ss_descriptors)) {
+			fsg_ss_function);
-			usb_free_descriptors(f->hs_descriptors);
+	if (ret)
-			usb_free_descriptors(f->descriptors);
+		goto autoconf_fail;
-			return -ENOMEM;
-		}
-	}
 
 	return 0;
 
@@ -2986,7 +2964,6 @@ autoconf_fail:
 	return -ENOTSUPP;
 }
 
-
 /****************************** ADD FUNCTION ******************************/
 
 static struct usb_gadget_strings *fsg_strings_array[] = {

drivers/usb/gadget/f_midi.c

@@ -414,7 +414,7 @@ static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f)
 	kfree(midi->id);
 	midi->id = NULL;
 
-	usb_free_descriptors(f->descriptors);
+	usb_free_all_descriptors(f);
 	kfree(midi);
 }
 
@@ -881,19 +881,25 @@ f_midi_bind(struct usb_configuration *c, struct usb_function *f)
 	 * both speeds
 	 */
 	/* copy descriptors, and track endpoint copies */
+	f->fs_descriptors = usb_copy_descriptors(midi_function);
+	if (!f->fs_descriptors)
+		goto fail_f_midi;
+
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
-		c->highspeed = true;
 		bulk_in_desc.wMaxPacketSize = cpu_to_le16(512);
 		bulk_out_desc.wMaxPacketSize = cpu_to_le16(512);
 		f->hs_descriptors = usb_copy_descriptors(midi_function);
-	} else {
+		if (!f->hs_descriptors)
-		f->descriptors = usb_copy_descriptors(midi_function);
+			goto fail_f_midi;
 	}
 
 	kfree(midi_function);
 
 	return 0;
 
+fail_f_midi:
+	kfree(midi_function);
+	usb_free_descriptors(f->hs_descriptors);
 fail:
 	/* we might as well release our claims on endpoints */
 	if (midi->out_ep)